Download PDF Catalogue - Carba-Tec

Father’s Day

Carba-Tec ® Management Team 

To Our Valued Customers 

Welcome to the August edition of 

the Carba-Tec ® catalogue. Winter is 

well and truly with us and we are all 

spending a lot more time indoors. What 

a great time of year to settle into the 

workshop with a good project. 

Woodworking is often a solitary 

pastime, but it can also bring people 

together in the form of woodworking 

clubs and online forums. Carol Russell 

recently visited one of the Men’s Sheds 

in Brisbane and saw first hand what a 

great idea they are and how they are 

offering men a place where they can be 

with other like-minded people. In this 

catalogue edition she writes about the 

philosophy behind the organisation. 

Woodworking clubs exist all over 

Australia and New Zealand. We would 

like to make it easier for people to find 

the clubs in their region, Carba-Tec ® is 

compiling a list to post on our website. 

If you are a member of a woodworking 

club and would like to be included, 

Send your details to: 

clubs@carbatec.com.au. 

It would be good if you could include 

a brief synopsis of the club and any 

special areas of interest. 

Our Brisbane store has begun 

holding a series of masterclasses 

in handskills. The classes include 

topics such as sharpening, polishing, 

hand dovetailing, carving and wood 

sculpture. We have been fortunate 

to have on board some of our finest 

craftspeople and we are very grateful 

for their involvement. For information 

on the upcoming classes go to: 

www.carbatec.com/classes. We hope 

that in the future our other stores will 

also be able to offer these events. 

Father’s Day is coming up on 

September 2nd and we have included 

some great specials to celebrate. You’ll 

find these in the rear section of the 

catalogue along with some great new 

products. There’s time to drop loads of 

hints and compile your wishlist for your 

family members. If you’re not sure what 

you want, there’s always a gift card. 

Have a great Father’s Day. 

We hope you enjoy the catalogue, 

The Carba-Tec ® Team 

A beautiful, comfortable deck is within your reach! Get the deck you want 

today, completely free of exposed nails and awkward fasteners, so you 

can enjoy it tomorrow! 

Product Code: 

KR-KJDECKSYS 

® 

Deck Jig 

For more information go to our website at 

www.carbatec.com.au 

Front Cover: Peter Geddes in his workshop. 

Photo: Donovan Knowles

Table of Contents 

Woodwork Machinery 8 

Bandsaws..........................................12, 13 

Cabinet Saws...................................8, 9, 10 

CNC Machines..........................................19 

Drill Press.................................................25 

Jointers........................................14, 15, 18 

Mortisers..................................................24 

Panel Saws.................................................9 

Router Tables......................................22, 23 

Scroll Saws........................................10, 11 

Sanders..............................................20, 21 

Spindle Shaper/Moulder............................23 

Thicknessers................................16, 17, 18 

Table Saws.................................8, 9, 10, 85 

Machinery Accessories 26 

Adhesive Measuring Tape.........................34 

Alignment System.....................................32 

Bandsaw Accessories......................... 29-32 

Belt/ Disc Cleaner.....................................36 

Conveyors/Roller Stands.....................27, 28 

Drill Press Support/Tables.........................33 

Featherboards...............................28, 29, 30 

Insert Plates (Router)................................31 

Knobs, Handles, Screws, Nuts............ 34-36 

Magswitch................................................29 

Mitre Bars/Tracks..........................30, 33, 34 

Mitre Gauges......................................30, 32 

Mortising Attachment...............................33 

Powerfeeds..............................................32 

Sanding & Accessories.......................36, 37 

Silverglide.................................................26 

Stands/Mobile Bases/Casters........26, 27, 28 

Tablesaw Accessories..................26, 30, 32 

T-Slots/Clamp Tracks/Jig Making........ 33-36 

Toggle Clamps..........................................36 

Woodturning 38 

Lathes ...............................................38, 39 

Live Centres & Drive Dogs............40, 42, 43 

Scrollchucks & Jaws..........................40, 41 

Teknatool Accessories........................40, 41 

Turning Tools/Chisels.......................... 44-45 

Dust Extraction 46 

Dust Extractors................................... 46-48 

Dust Extraction Accessories................ 47-50 

Room Air Filters........................................46 

Safety & Workshop Accessories 51 

Aprons.....................................................53 

Bench Cookies TM .......................................53 

Braces & Belts..........................................54 

Dust Masks/Respirators............................51 

Face Shields.............................................51 

Lighting....................................................52 

Magnifiers................................................52 

Push Sticks & Blocks....................26, 28, 30 

Shelving/Storage Racking.........................54 

Tool Rolls & Pouches................................53 

Utility Boxes/Containers............................54 

Metalworking 55 

Guillotine/Benders.....................................57 

Metal Tools & Accessories.................. 57-60 

Metal Lathes.............................................56 

Milling Machines.......................................55 

Tap & Die Sets..........................................58 

Marking & Measuring 61 

Angle Finder.............................................66 

Bar Gauge Heads......................................61 

Beam Compass Heads.......................61, 62 

Bevel Setter/ Sliding Bevel.........................62 

Depth Gauge.............................................62 

Digital Measuring & Calipers.....................66 

Dovetail & Saddle Squares..................63, 64 

Height Gauges..............................64, 65, 66 

Marking Tools...................61, 62, 63, 65, 66 

Rules................................62, 63, 64, 65, 66 

Squares............................62, 63, 64, 65, 66 

Straightedges...........................................66 

Handtools & Handplanes 67 

Adze/Axe/Hatchet.....................................68 

Beading Tools...........................................71 

Burnishers................................................75 

Camellia Oil..............................................71 

Chisels...............................................67, 68 

Hammers/Mallets.....................................68 

Handplanes..................................72, 73, 74 

Handsaws..........................................69, 70 

Kitchen Knives..........................................68 

Moisture Meters.......................................70 

Scrapers/Spokeshaves.............................75 

Tri-Burnisher.............................................75 

Sharpening 76 

Diamond Files...........................................77 

Grinders & Accessories......................79, 80 

Honing Guides/Compound........................76 

Lapping Plates/Kits...................................77 

Sharpening Jigs........................................76 

Slipstones & Strops..................................80 

Tormek.....................................................79 

Waterstones.............................................77 

Whetstones/DMT ® ..............................77, 78 

Clamping, Vises & Benches 81 

Band/Framers Clamps..............................84 

Clamps-Sash/TBar/Pipe............................82 

Hold-downs/ Bench Dogs.........................81 

ProGrip TM ..................................................84 

Vises..................................81, 83, 115, 116 

Workbenches...........................................81 

Power & Pneumatic Tools 85 

Bosch Power Tools...................................85 

Edgebander & Trimmer.............................87 

Festool Power Tools............................ 86-87 

Hinge Mortise Jig.....................................87 

Lock Mortiser...........................................87 

Triton Tools/Accessories..................... 88-89 

Routing & Accessories 90 

Base Plate Adaptor ..................................94 

Inlay Kit/Guide bushes..............................95 

Router Bits (Carba-Tec ® ) ..........................95 

Router Bits (CMT TM )............................ 90-93 

Saw Blades..............................................94 

Drilling & Boring 96 

Angle Chuck...........................................100 

Auger Gimlets...........................................97 

Circle Cutters..........................................100 

Countersinks ...................................99, 100 

Drill Chuck Attachments....................97, 100 

Drill Sets.............................................96, 97 

Drill Stops.................................................96 

Forstner Style Bits...............................97, 98 

Holesaw Kit............................................129 

Plug Cutters .....................................99, 100 

Saw Tooth Bits ........................................98 

Spade Bit Set............................................97 

Toy Wheel Cutters...................................100 

Dovetail Jigs & Joinery 101 

Beadlock Joinery....................................105 

Dowelling & Biscuits...............................104 

Framing Tools/Accessories ....................105 

Kreg Jigs & Accessories ................106, 107 

Kreg Screws, Plugs, Drivers ...................107 

Leigh/Dovetail Jigs/Accessories...... 102-104 

Mitre Saws/Trimmers..............................105 

Mortise & Tenon Jigs..............................101 

Adhesives & Finishing 108 

Glue...............................................109, 110 

Gluing Accessories.................108, 109, 110 

HVLP Spray Guns...................................108 

Silverglide.................................................26 

Wax/Oil/Shellac.......................108, 109, 110 

Woodcarving 111 

Carving Chisels & Sets................... 111-115 

Drawshaves/Drawknives.................111, 115 

Knives....................................111, 112, 115 

Palm Sets (Pfeil, Flexcut)................112, 115 

Powered Carving Tools...........................116 

Rasps/Rifflers.........................................116 

Scorp.............................................111, 115 

Violin Gouges.........................................111 

Vises/Carving.................................115, 116 

Pens, Clocks & Craft 117 

Brassware..............................................122 

Clocks & Weather Instruments.........120,121 

Craft Accessories...........................117, 122 

Pen Blanks.............................................118 

Pen Parts...............................................119 

Pen Rolls/Boxes......................................119 

Pyrography.............................................117 

Rare Earth Magnets................................117 

Salt & Pepper Mechanisms.....................117 

Signmakers Templates............................121 

Please see website for all terms and conditions of sale. Website pricing supercedes all printed pricing and advertising.

WHY 

use handplanes 

in A modern 

WORLD? 

It’s very interesting to look at the place 

the handplane occupies in the history 

of woodworking. One of the most 

important changes that occurred in this 

history was the progression from the 

carpenter - whose main tools were the 

axe, adze and saw - to the joiner, cabinet 

maker and other craftsmen, all of whom 

needed components produced to precise 

dimensions and a smooth finish. It was 

the handplane alone that made this 

development possible. 

Prior to the machine era this important 

preparatory work was done by hand 

with bench planes. The introduction of 

machinery and power tools dramatically 

reduced both the labour component and 

the time requirement. These benefits 

are unquestionably essential in today’s 

commercial workshops, so it is therefore 

inevitable that the bench plane would 

become far less important. Despite this, 

the simple truth remains that a plane 

works better and more efficiently than a 

machine in many situations. 

For example, no machine with rotating 

blades can match the clarity and polish 

produced on a surface cut with a well 

tuned and sharp handplane. Surface 

ripples left by some thicknessing 

machines are best removed with a bench 

plane. When fitting a joint such as a 

mortise and tenon, no tool is more useful 

than a shoulder plane. The difference 

between a well fitted drawer and a loose 

one is often a little more than a thin plane 

shaving. A plane allows you to do this, 

one shaving at a time. What machine 

can do that? Similarly, the fitting of a door 

and cabinet is most easily and accurately 

done with a bench plane. Cleaning up 

after having glued up a joint with dovetails 

or finger joints is quickly and neatly done 

with a block or bench plane. 

There are numerous other situations 

in which a handplane is the most 

appropriate tool. Possibly the most 

important reason for learning to use one 

is that the skills you acquire can transform 

the standard of your craftsmanship. It is 

not a difficult tool to use, like swimming or 

riding a bike, it’s never forgotten. Many of 

the older generation of craftsmen - those 

who spent their early years working only 

with hand tools - find these skills of great 

benefit when using machinery. 

Frank Klaus, the highly regarded 

European craftsman, now based in 

America, states that once mastered, the 

handplane becomes the most important 

tool in your workshop. James Krenov, 

regarded by many as the most influential 

craftsman in fine woodworking in the last 

30 years, likens the plane to the violin 

in an orchestra, the instrument that sets 

the tone of a piece. If that’s not enough, 

planes, properly used, can make your 

woodworking more enjoyable. Certainly, 

your workshop becomes a quieter and 

cleaner place. 

In short, there is no substitute for a well 

sharpened and finely tuned handplane. 

Peter Geddes is a Brisbane-based 

woodworker. He teaches classes in 

handplane usage entitled ‘Making Friends 

With Your Handplane ‘ at Carba- Tec ® 

in Brisbane. 

Want some tips on how 

to improve your 

handplaning technique? 

Go to the Develop and Discover section of our website: 


To read Peter’s woodworking profile go to 

www.carbatec.com.au/peter-geddes

Diamond 

Sharpening 

An important step to the success of any 

woodworking project is to begin with sharp 

tools. DMT ® Diamond Sharpeners are well 

known to woodworkers for their remarkable 

sharpening speed, precision flatness 

and ease of use. Some of the factors that 

contribute to the sharpening efficiency of 

DMT ® products are: 

1. Precisely sized micron Monocrystalline 

diamond. The single crystal super abrasive 

provides durability and toughness. It 

is most effective on the new harder tool 

steels. 

2. The unique interrupted surface of 

recessed polka dots collects and removes 

the metal fines from the tool edge during 

the sharpening process. This feature keeps 

the DMT diamond-sharpening surface 

performing, making your sharpening task 

that much faster. 

3. The flatness of the substrate matches 

the flatness of ground steel plates - a 

precision standard not attained by other 

manufacturers or sharpeners. 

DMT ® make a wide range of bench stones 

for sharpening woodworking chisels and 

plane irons. The Dia Flat Lapping Plate is 

designed to re-establish a perfectly flat 

surface on your waterstones or Arkansas 

stones. 

There are the DuoSharp stones that are 

double-sided, featuring a different grit on 

each side for two stage sharpening, a 

highly economical way to purchase 

two stones. 

For sharpening gouges or other shaped 

chisels there are honing cones or the 

unusually designed Wave Sharpener. 

This comes in 600 or 1200 grit and has 

both convex and concave profiles that 

taper from a radius of 1.59mm to 25mm, 

to accommodate a wide range of curved 

tools. When sharpening small or pointed 

tools, DMT ® have created Dia-Sharp, these 

stones have a continuous diamond surfaces 

to avoid the fine corners of the tool 

snagging or catching on the corners. 

The easy colour coding system guides 

you through the different grades of 

stone: Black-Extra-coarse, Blue- 

Course, Red-Fine, Green-Extra 

Fine. 

Make your job or hobby 

easier, safer and quicker 

by keeping your tools 

sharp. There is a DMT ® 

product for just about 

every sharpening need. 

To view our range of DMT ® 

products go to 


The DMT ® Advantage 

Speed – They work in a fraction of the 

time required by other methods, only light 

pressure is needed, let the diamonds do 

the work. 

Ease of use - Just a few easy strokes 

on your own or with a guided sharpening 

systems! 

Cleanliness – No messy oils or clean 

up, use only water if needed. 

Durability - Longest lasting and highest 

quality sharpening on the market! Will not 

hollow or groove over the life of the 

product. 

Versatility – Widest range of product 

available on the market, from Extra-Extra 

Coarse 120 micron grit to Extra-Extra Fine 

3 micron grit. From small portable, folding 

products, to large stationary bench 

stones, to kitchen steels and diamond 

pastes.

The 

Men’s 

Shed 

The ‘Men’s Shed’ is an initiative to improve the health of men by 

giving them a place in their communities where they can find companionship 

and purpose. The sheds are making a difference to 

thousands of men from all over Australia and New Zealand. Carol 

Russell visited one of the sheds and spoke to some of the participants. 

I was reminded of the appeal of a good shed recently when visiting 

my brother on a freezing cold day in Tasmania. After lunch, 

we left the warm and cosy little house in the foothills of the Western 

Tiers, preferring the atmosphere in the old shearers shed that 

Kerry has converted to a workshop. We sat around a big wood 

stove with a drink and chatted about tools and project plans and 

the meaning of life. The smell of lanolin hung in the air, reminding 

me of the shed’s former use. It was a great day. 

My brother’s shed is an unattainable dream to many people. As 

cities grow and housing blocks decrease in size, more of us live in 

units or move into tidy manicured suburbs and retirement homes. 

There just isn’t the space to make a mess, gather with some 

friends and let our imaginations roam free. 

The Men’s Sheds were formed to address a growing concern over 

the lack of attention given to men’s health issues, particularly anxiety 

and depression which can be triggered by the isolation that 

retirement or family breakdown can create. It’s recognised that 

men are less likely to confide in others and seek help with their 

problems than women. 

The mantra of the peak body for the Men’s Sheds - The Australian 

Men’s Shed Association ( AMSA ) is ‘health by stealth’. When you 

visit a shed the health aspect isn’t ‘in your face’. People go to the 

sheds for different reasons and are free to engage on whatever 

level they want with the other ‘sheddies’. It’s really just a group 

of men getting together in a relaxed atmosphere to make or fix 

things, swap ideas and maybe share a cup of coffee and a chat. 

Anyone considering joining a shed needn’t be concerned that 

they will be forced into revealing more about themselves than they 

are comfortable with. 

During my visit to the Carina Men’s Shed situated in Brisbane, Mal 

Weier, the shed’s president explains that each one of the almost 

800 sheds throughout the country is different. The skills of the 

membership, its location and the facilities available at each Men’s 

Shed shape its style and the activities that are on offer. These can 

include just about anything. Some examples of the more common 

activities are: wood and metalwork, photography, computing, furniture 

restoration, car mechanics and even cooking, nutrition and 

fitness. 

The sheds rely on the support of the local councils, communities 

and businesses to help with resources and finding a suitable location. 

If they register with the peak body, Australian Men’s Shed 

Association (AMSA ) there is an enormous support network to call 

on. They offer help with the practical aspects of starting up and 

managing a shed such as insurance, risk management, funding 

and accessing resources. 

The AMSA have a comprehensive website that can be used to locate 

sheds and an online forum entitled ‘The Shed Online’. This is 

a virtual Men’s Shed that contains a discussion forum where men

can talk to each other online and share ideas on practical things 

like gardening or woodwork. There are also blogs and articles on 

heath issues such as depression, diabetes and cancer. 

Shed members come from all walks of life. During my visit to the 

Carina Men’s Shed, I met Charlie, a retired cheesemaker, Robert, 

a retired engineer, Ken a journalist and author and Herman a retired 

dogman/rigger, as well as retired teachers and public servants. 

On the day of my visit the members from the local Wynnum- 

Manly Men’s Shed were visiting. The mood was jovial and friendly 

as the visitors checked out the facilities and swapped stories and 

compared notes with their fellow sheddies. 

Mal explains that at Carina there are currently 34 members, the 

youngest is 36 and the oldest is 86. He is hoping to foster a mentoring 

program in the future to harness the enormous wealth of 

knowledge amongst the members and hand it on to younger men. 

Like sheds everywhere, the men at Carina have done a lot of work 

for local schools and community groups, including making a ramp 

for the ‘Meals On Wheels’ ladies who had battled with lifting their 

trolly over a large step for over 30 years. After Cyclone Yasi hit Tully, 

the men embarked on a project to make dozens of possum boxes 

to house the displaced marsupials. The trees had been stripped of 

their foliage and without the boxes, the possums would have died. 

This project was done with the help of Bunnings. 

Although the AMSA website states that women are welcome at the 

sheds, the feeling seems to be that women have access to many 

other forms of socialising and are more likely to be able to speak 

to each other about issues surrounding health and their personal 

and family welfare. I felt very warmly welcomed though and was 

touched by the men’s willingness to speak to me about their reasons 

for seeking out the Mens Sheds. 

There was a common theme, Many of them had found that after 

retirement they felt lost and at a loose end, missing the social contact 

and relevance their work had provided for them. Some had 

lost their wives or partners to illness or had suffered illness themselves. 

Thy felt reinvigorated to be a part of something and share 

their interests with others. 

The Men’s Shed has become a practical lifeline to many. In receiving 

and giving support to other people, the sheds are helping to 

regain the key meaning of what it is to be a part of a community 

where people look out for each other. 

To check out the Carina Men’s Shed Website go to 

www.mensshedcarina.com.au. 

If you feel there is something at the Men’s Shed for you or if you 

have materials or equipment you would like to donate, go to the 

AMSA website: www.mensshed.org to find your nearest shed 

location or call them on 1300 550 009. 

Bench Chisels 

Veritas ® have added a selection of bench 

chisels to their range of premium tools. The 

blades are turned and milled out of solid bar 

stock made from 01 grade steel, renowned 

for its ease of sharpening and superb edgeretention 

properties. 

Each blade is guaranteed to be lapped to 

a flatness tolerance of within 0.0005” ( half 

of one-thousandth of an inch) over the entire 

surface. So other than a fine hone, the 

Veritas ® bench chisels are ready to use out 

of the box. 

The chisels have a taper from shoulder to tip 

for strength and rigidity, with parallel sides 

and bevelled edges for clearance when 

working in tight recesses. 

The handles are kiln-baked Maple. The Maple 

is baked at a high temperature to eliminate 

all the moisture and caramelise the 

natural sugars in the wood. This increases 

the density making it exceptionally hard and 

able to withstand constant use and hammer 

blows. 

The blades are fitted to the handles with a 

tang and a socket-like ferrule. the tang has 

flat sides to prevent the handle from rotating. 

The ferrule seats directly onto the shoulder 

of the blade so mallet blows and usage will 

make the joint tighter over time, not looser. 

There are five sizes of chisels in the range, 

the 1/4” and 3/8’ chisels have a primary bevel 

of 30° and the 1/2”, 3/4” and 1” chisels 

have a primary bevel of 25°. All the chisels 

have a micro-bevel of 2°. 

Veritas’ new bench chisels are an all-round 

chisel. They are sturdy enough for heavier 

work but are still able to be used for fine 

paring and joinery. 

Other contacts that may be of help: 

Beyond Blue - www.beyondblue.org.au, 1300 224 636 

Mensline - 1300 789 978 

Lifeline - 13 11 14 

Photos at left: 

Top - Passing on information is an important 

part of the ‘Men’s Shed’ culture. 

Middle - Robert Tritchler shares his interest 

in astronomy by showing us the transit 

of Venus. 

Bottom - Communal projects are a core 

activity at ‘The Men’s Shed’.

Whittling 

Away The Time 

Woodworking comes in many 

forms, from creating imposing 

pieces of furniture that require 

a workshop laden with 

benches, tools and machinery 

to small whimsical figures that can be 

created at the kitchen table - hand-held 

using only a basic kit of tools. Such are the 

creations of South Australian artist Doug 

Collins of ‘Waitpinga Whittling’. 

In 2000 Doug and his wife Elizabeth made 

the decision to retire and move to the 

small hamlet of Waitpinga on the Southern 

Fleurieu coast in an attempt to create a 

healthier environment for Elizabeth who had 

suffered an illness for many years. 

Doug soon discovered that the move to the 

country life was not all that he expected. 

In particular, he missed the creative 

stimulation that his work had afforded him. 

He decided to pursue his old interest of 

woodworking, but found that the demands 

of traditional forms of this craft did not suit 

their new lifestyle. As a carer he needed to 

be on hand and close to home. 

The turning point came in 2003 when they 

were visited by a Canadian friend that Doug 

had not seen in 30 years. He had become 

a professional carver since they last met 

and offered to teach Doug some whittling. 

This was a revelation, it’s as basic a form 

of woodwork as it gets - tool in one hand, 

work in the other. There is no set up time, 

you can do it anywhere and pick it up or put 

it down in a second or two. At last a form of 

woodwork with the flexibility that worked for 

their situation. 

Wild enthusiasm generated at first dozens, 

then hundreds of simple, small, carved 

items. Soon everyone they knew had been 

given several pieces of Doug’s work and 

still all the shelves in the house were filling 

up with more. Someone suggested that 

perhaps some of it could be loaded into 

a cardboard box and sold at a local craft 

market. ‘Waitpinga Whittling’ was born. 

Doug emphasises that whittling is just a 

hobby for him. 

“I exhibit a few times a year and teach 

a bit. You can’t earn a living at it unless 

you’re willing to really pour everything into 

it, and probably not even then. I’m not in a 

position to do that, but as a creative outlet 

in woodwork, it’s the ‘best fit’ for us.” 

What is Whittling? 

Doug defines whittling as an approach to 

carving in which both the tool and the work 

are held in the hands as opposed to being 

bolted down or clamped. This definition 

allows for a wider variety of tools to be used 

than the more traditional concept of 

blades only. 

Whittling is by far the most suitable form of 

woodworking for busy people. Most people 

have a preconception that whittling requires 

a lot of time. Some projects, particularly 

complex ones, can require quite a few 

hours, however the simplicity of whittling 

makes it very easy to pick up and put down. 

“It is very suitable for filling the ‘nooks and 

crannies’ of life”. 

Much of Doug’s work is done in increments 

of half an hour or less. It also makes use 

of material that in many other forms of 

woodwork would be considered scrap. 

Doug makes the point that Whittling can 

be a great stepping stone to other, more 

complex forms of woodworking. It teaches 

you a great deal about wood and its 

potential in a way that is relaxing and fun. 

What Tools Do You Need? 

Carving is such a varied art form, even 

within the category of whittling, that it’s 

impossible to find one tool that will do 

everything. Doug does most of his work 

with knife blades of one sort or another, and 

supplements these with a small number 

of carving chisels and occasionally power 

carving tools. He explains that there are 

only so many things you can accomplish 

with a blade. 

“Sooner or later one wants a smooth, 

rounded surface. The best a blade can do 

for you in that situation is a series of facets. 

This is where a range of files, scrapers, 

rifflers and picks, even sandpapers come 

into their own. I strongly advise beginners to 

acquire these things when they discover an 

actual need for them. Its easy to get caught 

up in the excitement and buy stuff you 

don’t need.” 

Equally important to your choice of tools, he 

explains, is the ability to keep them sharp. 

“It’s a skill that goes hand-in-glove with 

carving. Many people don’t fully appreciate 

what a carver means by “sharp”. There is a 

world of difference between ‘kitchen sharp’ 

and ‘carving sharp’. It can be a contentious 

issue, a bit like religion or politics. Everybody 

has their own ideas of the ‘right’ way to go 

about it.” 

Doug has developed his own techniques 

and has devised a sharpening kit that 

he provides to his students. He runs 

occasional classes in Victor Harbor and 

in Adelaide. 

Having a hobby that you find interesting and 

fulfilling can be a life saver. It is somewhere 

to rest your mind and concentrate your 

thoughts. If you want to work with wood but 

don’t have much time or the facilities to do it 

in, why don’t you try some whittling. It might 

just open up a whole new world for you. 

Want to know more about the work of Doug 

Collins or enrol in a class? 

Email whittling@waitpingacliffs.com or 

call 08 8552 8822. 

There will be an extended version of this 

article and more photos of Doug’s work on 

our website in the Develop and Discover 

section: www.carbatec.com.au

Half 

Ship Hull Models by Gerald Coon 

Half ship hull models are part of maritime 

history and played an important role in the 

design and manufacture of wooden boats 

and ships. Traditionally they were used by 

maritime designers to refine the shape of a 

boat’s hull and by merchants who wanted to 

show prospective customers design details 

in three dimensions. Because hulls are symmetrical, 

it was deemed that all the important 

elements could be viewed in this half hull 

format. 

There were various ways of constructing the 

models, they could be carved from a single 

piece of wood known as a ‘block model’ or 

built up using wooden layers, this was known 

as a ‘lift model’. The shape is carved from 

a series of strips cut to varying thicknesses 

and temporarily put together. This method 

required less material to be removed in the 

carving process. 

Lift models, could be later separated and 

the pieces traced around to create a scale 

drawing. These drawings were used to create 

a plan for the construction of the boat. In 

the case of block models, lead strips were 

bent over the model where the ribs were to 

be positioned or they would be cut along 

vertical lines. These shaped pieces would 

be drawn and then expanded to make larger 

templates for the boatbuilder to follow. 

At the completion of the project, the half hull 

model would be presented to the owner as 

a memento, it was often attached to a board 

so it could be displayed. Original models are 

collectors items and can be valuable. Some 

designer were known to destroy them to 

avoid others from copying their work. 

This is a great project to make and it uses 

very little material. Half hull models are evocative 

pieces that have a timeless character. 

To see Gerald’s instructions on how to build a 

half hull model using the ‘Lift’ technique, 

Go to the Develop & Discover section at www.carbatec.com.au

Machinery - Table Saws 

Opt. Sliding table 

CARBA-TEC ® PORTABLE SITE SAW 

Rugged all-steel site or workshop saw. Wheels and handles make 

for easy manoeuvring around the workshop and the legs fold up. 

Includes both rear and side extension tables and full width rip fence. 

Specifications 

Motor 

Max. Cut at 90° 


Motor Type 

Arbor Diameter 

Workshop Footprint 

Shipping/Net Weight 

3hp 240v 

95mm 

65mm 

Induction 

30mm 

1470x2000x1000mm 

60/56kg 

Order no. 

Price 

CSB-315 $559.00 

CARBA-TEC ® 10” CABINET SAW 

This saw represents good value not only in the saw itself but also in 

the accessory pack that converts the saw into a sliding table saw. 


Motor 



Motor Type 




3hp 240v 15A 

75mm 

60mm 

Induction 

30mm 

2220x2000x1100mm 

260/250kg 

Order no. Description Price 

MJ2325CT 10” Cabinet Saw $1,195.00 

MJ2325CTSP Sliding Table $699.00 

CARBA-TEC ® 10” CONTRACTOR’S 

TABLE SAW 

Cast iron construction make this saw a solid performer 

for the enthusiast. Made in the contractor’s style of saw, 

it is easily portable especially when coupled with a mobile 

base (sold separately). A quality fence and emergency 

paddle STOP switch are a plus. Unit includes dust port 

under the blade and mitre gauge. 


Motor 

1-1/2hp 240v 


83mm 


58mm 

Motor Type 

Induction 

Arbor Diameter 5/8” 


1440x1100x1050mm 


110/90kg 

Order no. 

Price 

CTJ-650 $899.00 

8 

For more information & to shop online go to www.carbatec.com.au

Machinery - Cabinet Saws 

CARBA-TEC ® 12” SLIDING TABLE 

PANEL SAW WITH SCRIBER BLADE 

CARBA-TEC ® 10” HEAVY DUTY CABINET SAW 

A machine for any workshop. Powerful motor and excellent build 

quality make this unit value for money as well as precise and a 

superior performer. Includes router wing (router not included). 


Motor 

3hp 240v, 15A 


77mm 


58mm 

Motor Type 

Induction 



1480x1110x980mm 


195/190kg 


TSC-10HB 10” Heavy Duty Cabinet Saw $1,849.00 

TSC-10HBRF Router Fence to suit $209.00 

TSC-10HBRW Router Wing to suit older model $129.00 

An economy 12” panel saw with all the 

features. Comes complete with 1.6m 

sliding table travel, scribing blade, table 

extension and overhead dust extraction 

saw guard. 


Motor 



Motor Type 




3hp, 240v, 15A 

100mm 

80mm 

Induction 

30mm 

3900 x 3400 x 1000mm 

255/210kg 

Order no. 

Price 

CT-PS1600-1PH $2,495.00 

CARBA-TEC ® 10” HEAVY DUTY LEFT TILTING CABINET SAW 

Carba-Tec ® ’s left tilting, heavy duty table saw has a precision ground 1118 x 739mm table top. T-slotted on both sides of the blade to 

hold the mitre gauge securely in place, this also means that you can use an accessory tenoning jig on either side of the blade without 

any trouble. The 762mm industrial fence is made in the Biesemeyer style which provides accuracy and repeatability. The 3hp induction 

motor powers poly v-belts that are mounted between a bearing assembly. This provides more efficient power transmission to the 

blade. 

WHY BUY A LEFT TILT? A disadvantage with a right tilting saw is the safety 

hazard caused by an off cut strip of timber being caught between your rip fence, and 

the saw blade that is tilted towards the rip fence. When the off cut rides up and catches 

the rear teeth of your blade, severe kickback can force the off cut back towards you. 

Left tilting saws are far safer, leaving off cut strips to move harmlessly to the left of the 

blade. Bevel cuts are also better on a left tilting saw. Firstly, with a right tilting saw you 

would usually need to put the good side down on the saw table surface. Left tilting saw 

allow you to leave the good side up, away from potential damage. 


Motor 

3hp 240v, 15A 


75mm 


55mm 

Motor Type 

Induction 



1650x1100x1100mm 


238/216kg 

Order no. 

Price 

TSCE-10L $2,595.00 

Want to see more? See our website for our full range of products. 9

Machinery - Panel Saws 

SERIES 

PREMIUM PERFORMANCE 

12” X SERIES PREMIUM SLIDING 

TABLE CABINET SAW 

The TS-12R has for years been the machine of choice for trade use 

and the discerning home user. Precision ground cast iron top, solid 

industrial rip fence and heavy internal construction are just three of its 

top features. This X series Premium model features a full sized sliding 

table assembly, allowing for a fully supported sheet size crosscut, 

plus massive ripping capacity on the right of the blade. This saw can 

have the optional RH table board and legs fitted to extend the table 

size. With the supplied dado extension, the TS-12RX series saws become 

the perfect choice for the professional looking to upgrade of 

the craftsmen simply wanting the best. This unit also available without 

sliding table assembly, see website for details. 


Motor 

3hp, 240v or 5hp, 415v 


100mm 


73mm 

Motor Type 

Induction 

Arbor Diameter Stepped 30mm w 5/8” 


2145 x 1210 x 1050mm 


265/250kg 

Order no. 

TS-12RX-1PH 

TS-12RX-3PH 

Price 

$3,795.00 

$3,995.00 

EXCALIBUR 21” PROFESSIONAL SCROLL SAW 

• Quick blade changes with finger operated blade clamps, no tools required. 

• Pivoting top arm for easy pin hole work. 

• Head tilts 45° left and right, tilting the blade, not the table, keeping 

the work piece level for better control and more accurate cuts. 

• Easy access speed and tension controls. 

• Organised blade storage on base. 

• Onboard dust blower. 

• Positive stops at common angles. 

• Very low vibration through all speed ranges. 


Motor 

Throat 

Stroke 

Table Size/Overall Size 

Blade Type 

Table Material 


Order no. 

CTEX-21CE 

CTEX-21-STAND 

100 watts, 240v 

535mm 

20mm 

345 x 597mm/380x812x380mm 

Pinless 

Plate Steel 

36/32kg 

Price 

$895.00 

$105.00 

10 


Machinery - Scroll Saws 

SCROLL SAW BLADES 

Order no. Univ. No. Width Thick TPI Price 

PGT TM PRECISION GROUND TOOTH 5” - 6 BLADES PER CARD 

OLS-PG45502 - .040” .018” 12 9 Rev. $8.00 

OLS-PG45702 - .046” .018” 10 7 Rev $8.00 

OLS-PG45902 - .048” .018” 8 6 Rev $8.00 

OLS-PG49502 - .045” .018” 12 $8.00 

OLS-PG49702 - .048” .018” 10.5 8 Rev. $8.00 

OLS-PG49902 - .048” .018” 9 6 Rev. $8.00 

PINNED 5” BETWEEN PINS - 6 BLADES PER CARD 

OLS-FR424P - .070” .010” 18.5 $7.00 

OLS-FR427P - .070” .010” 25 $7.00 

CARBA-TEC ® 16” VARIABLE SPEED SCROLL 

SAW Designed for quick change pinned blades. This economy 

model scroll saw is aimed at the entry level user. Solid cast base 

provides heft. Value for money for a basic scroller starting out. 


Motor 

Throat 

Stroke 


Blade Type 



70 watts, 240v 

16” (406mm) 

15mm 

410 x 254mm/630x290x350mm 

Pinned 

Aluminium 

24/20kg 

Order no. 

Price 

RSS-16V $139.00 

OLS-FR410P - .100” .018” 7 $7.00 

OLS-SC405P - .110” .018” 20 $7.00 

OLS-SC411P - .110” .018” 15 $7.00 

OLS-SC412P - .110” .018” 10 $7.00 

OLS-FR420RP - .110” .018” 9 + 5 $7.00 

PINLESS CROWN TOOTH 5” - 12 BLADES PER CARD 

OLS-CT620 - .024” .011” 20 $9.00 

OLS-CT622 - .026” .013” 20 $9.00 

OLS-CT623 - .032” .014” 16 $9.00 

OLS-CT625 - .038” .016” 16 $9.00 

OLS-CT627 - .045” .017” 11 $9.00 

OLS-CT629 - .053” .018” 6 $9.00 

OLS-CT632 - .065” .024” 6 $9.00 

PINLESS SKIP TOOTH 5” - 12 BLADES PER CARD 

OLS-FR440 2/0 .022” .010” 28 $8.00 

OLS-FR443 2 .029” .012” 20 $8.00 

OLS-FR445 4 .035” .015” 15 $8.00 

OLS-FR446 5 .038” .016” 12.5 $8.00 

OLS-FR448 7 .045” .017” 11.5 $8.00 

OLS-FR450 9 .053” .018” 11.5 $8.00 

OLS-FR453 12 .062” .024” 9.5 $8.00 

SPIRAL 5” PINLESS - 12 BLADES PER CARD 

CARBA-TEC ® 18” VARIABLE SPEED SCROLL SAW 

A high performance, low-vibration scroll saw with many features 

and benefits that will be of interest to the serious user. 


Motor 

Throat 

Stroke 


Blade Type 



120 watts, 240v 

18” (450mm) 

20mm 

460 x 235mm/285x620x310mm 

Pinned & Pinless 

Cast iron 

32/29kg 


CT-SS18V 18” Variable Speed Scroll Saw $599.00 

CT-SS18V-CHUCK Chucks (Set) $12.00 

CT-SS18V-INS Table Insert (each) $3.50 

OLS-SP461 0 .032” n/a 46 $9.00 

OLS-SP463 2 .035” n/a 41 $9.00 

OLS-SP465 4 .041” n/a 36 $9.00 

GRIT 5” - PINLESS & PINNED - 2 BLADES PER CARD 

OLS-SD42100 .156” .056 fine $10.00 

OLS-SD42101 .156” .056 fine $10.00 

MACH SPEED BLADES 

OLS-FR643 .032” .014 13 7 Rev. $9.00 

OLS-FR645 .038” .016 13 7 Rev. $9.00 

OLS-FR647 .046” .017 8 6 Rev. $9.00 

OLS-FR649 .055” .018 8 6 Rev. $9.00 


Machinery - Bandsaws 

CARBA-TEC ® 10” BANDSAW 

The best choice when you only need a 

small bandsaw. Perfect for cutting small pen 

blanks or doing model making. With similar 

features to a BAS-350B in a compact design 

the aluminium finned motor allows for cooler 

running. This is a feature usually found in 

larger saws. Includes stand, fence and mitre 

gauge. 


Motor 

1/2hp, 240v 

Cutting cap. (depth) 125mm 

Cutting cap. (width) 245mm 

Max. ripping 

118mm 

Table size 

330 x 350mm 

Table tilt 0°-45° 

Table height 

370/1010mm 

Positive stops 

0°-adjustable 

Wheel type 

Cast alloy 

Wheel diameter 

255mm 

Blade length 

1785mm 

Blade guides 

Ball bearing with 

manual raise/lower 

Blade release 

standard tension 

release 

Min. saw blade width 1/8” (3.2mm) 

Max. saw blade width 1/4” (6.35mm) 

Switch type 

NVR push button 

Dust port 1 x 2-1/2” 

Workshop footprint 630 x 480 x 1500mm 

Shipping/Net Weight 35/32kg 

Order no. 

Price 

BAS-250B $339.00 

CARBA-TEC ® 14” 2 SPEED 

BANDSAW 

Suitable for high speed wood cutting as well 

as low speed light duty cutting of non-ferrous 

metals. Includes rip fence and mitre gauge, 

100mm dust outlet, hinged wheel covers, micro 

adjustable ball bearing blade guides and 

stable stand. 


Motor 

1-1/2hp, 240v 



Max. ripping 

205mm 

Table size 

550 x 400mm 

Table tilt -5° - +50° 

Table height 

1060mm 


0° - adjustable 

Wheel type 

Cast Iron 

Wheel diameter 

350mm 

Blade length 

2490mm 

Blade guides 

Ball bearing with 

Manual raise/lower 

Blade release 

Std. tension release 


Max. saw blade width 3/4” (19mm) 

Switch type 

NVR Push Button 

Dust port 1 x 4” 



Order no. 

Price 

BAS-350B $649.00 

CARBA-TEC ® 14” BANDSAW 

A heavy duty 14” bandsaw with features 

usually found on industrial models, including 

rack and pinion height adjustment with 

scale, professional rip fence with magnified 

hairline cursor, quick release blade change, 

4” dust extractor port, hinged wheel covers, 

micro-adjustable ball bearing blade guides 

with rack and pinion height adjustment plus 

a sturdy heavy duty stand. 


Motor 

1hp, 240v 



Max. ripping 

300mm 

Table size 

360 x 360mm 

Table tilt -15° - +45° 

Table height 

1070mm 


0° adjustable 

Wheel type 

Cast alloy 

Wheel diameter 350mm 

Blade length 

2553mm 

Blade guides 

Ball bearing with rack 

& pinion crank 

Blade release 

Quick release lever 

action 


Max. saw blade width 5/8” (16mm) 

Switch type 

Mechanical push 

button 




Order no. 

Price 

CTJ-3501 $849.00 

12 


Machinery - Bandsaws 

BANDSAW BLADES 

Order no. Width TPI Price 

9” Length 1510mm Suits DE-28-150, BS-9 

BBL-1510-3-14 3mm 14 $31.00 

BBL-1510-6-6 6mm 6 $19.00 

BBL-1510-10-6 10mm 6 $19.00 

10” 1785mm long, Suits BAS-250B, CV-83210 

BBL-1785-3-14 3mm 14 $30.00 

BBL-1785-6-6 6mm 6 $19.00 

17” 

INDUSTRIAL BANDSAWS 

These industrial bandsaws have all the features! Extra heavy solid, not spoked, cast iron wheels, 

increased table sizes, higher rip fences, powerful induction motors, NVR type safety switches, 

door cut-out micro switches, blade tracking windows, micro-adjustable table tilting, quick release 

blade change mechanisms, improved upper and lower blade guide design for superior 

tracking and an easy to read magnified rip fence cursors. Combined with industry leading 

specs these bandsaws are at the top of their class. All this AND a 5 Year Warranty!! No other 

saw even comes close. Exclusive features package available only from CARBA-TEC ® : Table 

extension on LH side, heavy duty cast iron wheels, rip fence with increased height and magnetic 

switch gear with real key lockout. Our machines also conform to the CE safety scheme. 

Specifications SBW-4300CE (17”) SBW-4800CE (19”) SBW-5300CE (21”) 

Motor 2hp, 240v 2hp, 240v 3hp, 240v 

Cutting Capacity (depth) 300mm 300mm 300mm 

Cutting Capacity (width) 410mm 462mm 514mm 

Max. ripping 375mm 425mm 475mm 

Table Size 610 x 440mm 680 x 490mm 685 x 540mm 

Table tilt -10° - +45° -10° - +45° -10° - +45° 

Table height 950mm 950mm 950mm 

Positive stops 0° adjustable 0° adjustable 0° adjustable 

Wheel type Cast iron Cast iron Cast iron 

Wheel diameter 425mm 480mm 530mm 

Blade length 3335mm 3635mm 3865mm 

Blade guides 

Ball bearing with rack & 

pinion crank 

Ball bearing with rack 

& pinion crank 

19” & 21” 

Ball bearing with rack & 

pinion crank 

Blade release Quick lever action Quick lever action Quick lever action 

Min. saw blade width 1/8” (3.2mm) 1/8” (3.2mm) 1/8” (3.2mm) 

Max. saw blade width 1” (25mm) 1-1/4” (32mm) 1-1/4” (32mm) 

Switch type Key Lock NVR type Key Lock NVR type Key Lock NVR type 

Dust port 2 x 4” 2 x 4” 2 x 4” 

Workshop footprint 780 x 790 x 1930mm 920 x 850 x 2020mm 1020 x 790 x 2040mm 

Shipping/Net Weight 146/121kg 174/145kg 196/163kg 

Price $1,649.00 $1,795.00 $2,249.00 

BBL-1785-6-10 6mm 10 $19.00 

BBL-1785-10-6 10mm 6 $19.00 

14” 2375mm long. Suits SW-1401, SBW-3501, 

BS-14 

BBL-2375-3-14 3mm 14 $39.00 

BBL-2375-6-4 6mm 4 $19.00 

BBL-2375-6-6 6mm 6 $19.00 

BBL-2375-6-10 6mm 10 $19.00 

BBL-2375-6-24 6mm 24 $19.00 

BBL-2375-10-4 10mm 4 $19.00 

BBL-2375-10-6 10mm 6 $19.00 

BBL-2375-10-10 10mm 10 $19.00 

BBL-2375-10-24 10mm 24 $19.00 

BBL-2375-13-3 12mm 3 $19.00 

BBL-2375-13-4 12mm 4 $19.00 

BBL-2375-13-6 12mm 6 $19.00 

BBL-2375-13-8 12mm 8 $19.00 

BBL-2375-13-10 12mm 10 $19.00 

BBL-2375-13-24 12mm 24 $19.00 

BBL-2375-16-3 16mm 3 $26.00 

BBL-2375-16-4 16mm 4 $26.00 

BBL-2375-20-3 20mm 3 $30.00 

14” 2490mm long, Suits BAS-350B 

BBL-2490-3-14 3mm 14 $32.00 

BBL-2490-6-6 6mm 6 $20.00 

BBL-2490-6-10 6mm 10 $20.00 

BBL-2490-10-10 10mm 10 $20.00 

BBL-2490-13-6 12mm 6 $20.00 

BBL-2490-20-3 20mm 3 $31.00 

14” 2553mm long. Suits CTJ-3501 

BBL-2553-6-6 6mm 6 $20.00 

BBL-2553-10-6 10mm 6 $20.00 

BBL-2553-13-4 12mm 4 $20.00 

BBL-2553-13-6 12mm 4 $20.00 

BBL-2553-16-4 16mm 4 $27.00 

BBL-2553-20-3 20mm 3 $31.00 

14” 2680mm long, *Suits SW-1401, SBW-3501 

BBL-2680-3-14 3mm 14 $39.00 

BBL-2680-10-4 10mm 4 $21.00 

BBL-2680-10-6 10mm 6 $21.00 

BBL-2680-10-10 10mm 10 $21.00 

BBL-2680-16-3 16mm 3 $29.00 

BBL-2680-16-4 16mm 4 $29.00 

BBL-2680-20-3 20mm 3 $32.00 

17” 3335mm long, Suits SBW-4300CE 

BBL-3335-6-6 6mm 6 $27.00 

BBL-3335-13-6 13mm 6 $27.00 

BBL-3335-27-3 27mm 3 $51.00 

*BBL-2680-3-14 suits SW-1401 with riser kit only. 


Machinery - Jointers 

TB-6 

CARBA-TEC ® 6” BENCHTOP JOINTER 

Built with cast iron construction, this jointer provides big 

machine table and fence features in a portable size. 

CTJ-196 

CARBA-TEC ® 6” HEAVY 

DUTY JOINTER 

A truly professional machine suitable 

for any DIY or trade workshop. 

CTJ-350 

CARBA-TEC ® INDUSTRIAL 8” 

LONG BED JOINTER 

Simply the best jointer in its class bar none! Extra long 1950mm 

bed for stock support, and superior parallelogram system for easy 

and accurate table adjustments. This system also produces less 

chipping as the tables follow the arc of the cutterblock when raising 

or lowering the table. It also makes for more positive adjustment 

and there is no slack as found with ordinary screw type adjustment 

wheels. A centre-mounted, tilting fence provides solid support, and 

a triple blade cutterhead gives a smooth cut at 16,500 cpm. 

CTJ-150 

CARBA-TEC ® 6” INDUSTRIAL 


Perfect addition to any workshop. The extra bed length in this 

machine make it as accurate and true without being too cramped 

for space. 

CTJ-360 

CARBA-TEC ® INDUSTRIAL 12” 


Fitted with superior parallelogram system for easy and accurate 

table adjustment. Rack and pinion fence adjustment and high 

mounted switch for safe and easy operation. Perfect for the large 

workshop or in heavy production environment. 

Specifications TB-6 CTJ-196 CTJ-150 CTJ-350 CTJ-360-1PH 

Motor 1-1/2hp, 240v 1hp, 240v 1hp, 240v 1-1/2hp, 240v 3hp, 240v 

Table length 730mm 1180mm 1410mm 1950mm 2120mm 

Table width 155mm 170mm 152mm 200mm 320mm 

Rabbeting Capacity N/A 15 x 152mm 15 x 152 17 x 200mm 20 x 300mm 

Fence tilt -45° to +45° -45° to +45° -45° to +45° -45° to +45° -45° to +45° 

Fence stops -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° -45°/90°/+45° 

Cutter knives 2 3 3 3 3 

Workshop Footprint - 1180x710x960mm 1410x600x1310mm 1950 x 670 x 1310mm 2120 x 990 x 1060mm 

Shipping/Net Weight 45/42kg 116/105kg 150/135kg 245/230kg 470/440kg 

Price $329.00 $649.00 $799.00 $1,295.00 $3,295.00 

Order no. Suits Blades Price 

BLADE-TB6 TB-6 HSS Blades $32.00 

BLADE-6 CTJ-196, CTJ-150 6” HSS Blades set of 3 $27.00 

BLADE-6-T CTJ-196, CTJ-150 6” HSS with 18% Tungsten Set of 3 $39.00 

Order no. Suits Blades Price 

BLADE-8 CTJ-350 8” HSS Blades set of 3 $39.00 

BLADE-8-T CTJ-350 8” HSS with 18% Tungsten Set of 3 $49.00 

CTJ-360-BLADE CTJ-360 12” HSS Blades Set of 3 $99.00 

14 


Machinery - Jointers 

SERIES 


SPIRAL HEAD INDUSTRIAL 8” 



Motor 

Table length 

Table width 

Rabbeting Capacity 

Cutterhead spiral 

Workshop footprint 


1-1/2hp, 240v 

1950mm 

200mm 

17 x 200mm 

40 insert knives 

1950 x 670 x 1310mm 

245/230kg 


CTJ-350X 

Jointer $1,795.00 

BLADE-X-10 10 Insert Cutters $69.00 

BLADE-X-SCREW 10 Screws $4.00 

The Spiral Advantage 

• Smoother cuts 

• Less tearout, vibration & machine wear 

• Less noise 

• Long life fine grain carbide 

• Fully indexed cutters 

• Better chip ejection 

• Rapid cutter change 

• Dynamically balanced head 

• Four rotatable cutting edges 

SPIRAL HEAD INDUSTRIAL 12” 



Motor 

Table length 

Table width 

Rabbeting Capacity 

Cutterhead spiral 



3hp, 240v 

2120mm 

320mm 

20 x 300mm 


2120 x 990 x 1060mm 

470/440kg 


CTJ-360X-3PH Jointer $3,995.00 

BLADE-X-10 10 Insert Cutters $69.00 

BLADE-X-SCREW 10 Screws $4.00 


Machinery - Thicknessers 

CARBA-TEC ® 12-1/2” THICKNESSER 

This entry level thicknesser is suitable for the home, workshop or 

light trade use. Twin return rollers on top with infeed and outfeed 

rollers mounted at end of feed tables. 


Motor 

Max. cutting width 

Max./Min thickness of stock 

Max. cutting depth 

Infeed/outfeed roller 

Cutterhead 

Table Size 


2hp, 240v 

318mm 

150mm/ 5mm 

3mm/pass 

Polyurethane 

2 knives 

320x690mm 

34.5/30.5kg 


CT-317 12-1/2” Thicknesser $429.00 

PS-330 Generic Stand $79.00 

CT-317-CHUTE 4” Dust Chute $45.00 

BLADE-12.5 HSS Blades (2) Double Bevel $45.00 

BLADE-12.5-T 18% Tungsten Blades (2) Single Bevel $59.00 

13” CARBA-TEC ® THICKNESSER & MOULDER 

This unit accommodates a wide range of moulding knives (not 

included) to produce various patterns for application in decoration, 

furniture parts, door and window frames etc. 


Motor 



Max. cutting depth (plane/mould) 


Cutterhead 

Table Size 


2hp, 240v 

330mm 

150mm/5mm 

3mm/pass, 1.6mm/pass 

Polyurethane 

3 knives 

330x490mm 

58/55kg 


CT-236 13” Thicknesser & Moulder $1,195.00 

CT-236-CHUTE 4” Dust Chute $59.00 

CT-236-BLADESET Set of Moulding blades - 5 styles $259.00 

BLADE-13-T 13” TCT Planer Blade Set $69.00 

CARBA-TEC ® 15” THICKNESSER 

A fantastic machine at a fantastic price. This machine has 

a powerful motor, 3-knife cutterhead, serrated infeed roller, 

polyurethane outfeed roller, anti-kickback fingers and adjustable 

bed rollers. This machine is now fitted with cast 

iron tables on both the in and outfeed side instead of 

cheap rollers. Two feed speeds and a rise and fall head 

round out the long list of features on this machine. Price 

includes dust chute with 4” outlet, integral mobile base, 

paddle style stop switch. 

Note: 240v, 15amp circuit/plug and minimum 1200cfm dust 

extractor required for this machine. 


Motor 

3hp, 240v, 15A 

Max. cutting width 381mm 

Max./Min thickness of 

stock 

170mm/6mm 

Feed rates 

5/9Mpm 

Max. cutting depth 3mm/pass 

Infeed/outfeed roller Serrated/Polyurethane 

Cutterhead 

3 knives 

Re-sharpenable blades Yes 

Table Type 

Cast iron - Fixed 

Table size 

1070 x 381mm 

Dust Chute 1 x 4” 




CTJ-680 15” Thicknesser 

$1,349.00 

BLADE-15 15” HSS blades(3) 

$69.00 

BLADE-15-T 15” HSS blades w/18% tungsten(3) $89.00 

16 


Machinery - Thicknessers 

CARBA-TEC ® 15” 

INDUSTRIAL 

THICKNESSER 

The feature filled 

CTJ-381 is a welcome 

addition to any shed or 

workshop. Machine is fitted 

with full cast iron tables on 

both the in and outfeed side. 

Machine is fitted with integral 

mobile base. Note: 240v, 

15amp circuit/plug and minimum 

1200cfm dust extractor 

required for this machine. 

Workshop footprint same as 

CTJ-381X. 

SERIES 



Motor 

3hp, 240v, 15A 


381mm 


205mm/6mm 


3mm pass 


Serrated/Polyurethane 

Cutterhead 

3 knives 


290/260kg 


CTJ-381 15” Thicknesser $1,495.00 

BLADE-15 15” HSS Blades (3) $69.00 

BLADE-15-T 15” HSS Blades w/18% tungsten (3) $89.00 

CARBA-TEC ® 

20” INDUSTRIAL 

THICKNESSER 

Available in 3hp 

or 5hp motor to 

suit any workshop 

or industrial setup. 

Large cutting capacity, 

heavy castings make this 

machine a solid performer. 

Machine is fitted with 

integral mobile base. 

Note: 240v, 15amp 

circuit/plug and minimum 

1200cfm dust extractor 



Motor 





Cutterhead 



3hp, 240v 15A, or 5hp 415v 

508mm 

210mm/6mm 

4mm/pass 

Serrated/knurled metal 

4 knives 

1000x1410x1120mm 

420/380kg 


CTJ-508-1PH 3hp, 240v, Single phase $2,195.00 

CTJ-508-3PH 5hp, 415v, Three phase $2,195.00 

BLADE-20 20” HSS Blades (4) $129.00 

BLADE-20-T 20” HSS Blades with 18% tungsten (4) $159.00 

X SERIES SPIRAL HEAD 15” 

PREMIUM THICKNESSER 

The feature filled ‘X Series’ CTJ-381 is a welcome addition to 

any shed or workshop. This machine has a powerful motor, 

74-knife cutterhead, serrated infeed roller, polyurethane outfeed 

roller, anti-kickback fingers, adjustable bed rollers and 

front mounted NVR magnetic safety switch. Machine is fitted 

with full cast iron tables on both the in and outfeed side instead 

of cheap, light duty rollers. Two feed speeds and rise and fall 

table round out the long list of features on this machine. The 

motor is mounted in the lower cabinet, and this allows for the 

top mounted return rollers. Machine is also fitted with integral 

mobile base and dust chute with 4” chute. 

Note: 240v, 15amp circuit/plug and minimum 1200cfm dust extractor 



Motor 

3hp, 240v, 15A 


381mm 

Max./Min thickness of stock 205mm/6mm 

Feed Rates 

5/9Mpm 


1.5mm/pass 


Serrated/Polyurethane 

Cutterhead Spiral 


Table Type 

Cast iron - Rise and Fall 

Table Size 

1070 x 381mm 

Dust chute 1 x 4” 


820 x 1070 x 1160mm 


290/260kg 


CTJ-381X 

15” Thicknesser 

$2,595.00 

BLADE-X-10 Insert Cutters (10) 

$69.00 

BLADE-X-SCREW Screws (10) 

$4.00 


Machinery - Combination Planer/Thicknessers 

The Spiral Advantage 

• Smoother cuts 

• Less tearout, Less vibration, Less machine wear 

• Less noise 

• Long life fine grain carbide 

• Fully indexed cutters 

• Better chip ejection 

• Rapid cutter change 

• Dynamically balanced head 

• Four rotatable cutting edges 

SERIES 


SPIRAL HEAD 10” 

COMBO 

PLANER/ 

THICKNESSER 

A real space saver 

in the workshop. 

Features flip up 

tables for conversion 

to thicknesser, tables 

have noise dampening 

slots, serrated steel infeed 

roller is standard. European 

style alloy cutterhead guard. 

Note: Minimum 1200cfm 

dust extractor required for this 

machine. 

Spiral cutterhead 


Motor 





Cutterhead 



1-1/2hp, 240v 

250mm 

180mm/6mm 

2mm 

Serrated/Steel 

(AW106PTX)Spiral/(AW106PT)Straight 

1100x800x1000mm 

165/150kg 

Order no. Description Blades Price 

AW106PTX 10” Planer/Thicknesser Spiral 

AW106PT 10” Planer/Thicknesser Straight 

$1,849.00 

$1,349.00 

X SERIES SPIRAL HEAD 20” 

PREMIUM THICKNESSER 

Fitted with cast iron rise and fall table, adjustable bed rollers, 

cast iron in and outfeed tables and integral mobile base. A front 

mounted NVR magnetic safety switch, 5” rear dust collection 

port, top mounted return rollers and shielded turret guards add 

to the great value package on offer. Available in 3hp (240v) 

or 5hp (415v) motor to suit any workshop or industrial setup. 

Large cutting capacity, heavy castings make this machine a 

solid performer. Note: 240v, 15amp circuit/plug and minimum 

1200cfm dust extractor required for this machine. 


Motor 

3hp, 240v, 15A or 5hp 415v 


508mm 


210mm/6mm 

Feed Rates 

4.8/6.2Mpm 


1.5mm/pass 


Serrated/knurled metal 

Cutterhead Spiral 


Table Type 

Cast iron - Rise and Fall 

Table Size 

1410 x 508mm 

Dust chute 1 x 5” 


1000 x 1410 x 1120mm 


420/380kg 


CTJ-508X-1PH 3hp, 240v, 1PH 

$3,695.00 

CTJ-508X-3PH 5hp, 415v, 3PH 

$3,695.00 

BLADE-X-10 Insert Cutters (10) 

$69.00 

BLADE-X-SCREW Screws (10) 

$4.00 

WOODFAST 12” COMBO PLANER/THICKNESSER 

This deluxe machine features quick and easy changes between functions, 

analogue thickness height counter, heavy duty ribbed cast iron 

tables, large front adjusting fence and European style alloy cutterhead 

guard. A heavy duty quality space saver for your workshop. 

Note: 240v, 15amp circuit/plug and minimum 1200cfm dust extractor 



Motor 

3hp, 240v 15A 


305mm 


200mm/6mm 


3mm 


Serrated/Steel 

Cutterhead 

3 knives 


1400x650x1000mm 


190/175kg 


WPT-310 12” Planer/Thicknesser $1,695.00 

BLADE-WPT310 Set of 3 Blades $79.00 

18 


Machinery - CNC Machines 

CNC ROUTER SHARK © 

Carba-Tec ® are proud to distribute the CNC Shark © and CNC Shark 

Pro © PLUS to the Australian market. Appealing to both the informed 

CNC user, and entry level hobby user alike. They are both very portable 

machines and can offer consistent results and repeatability. 

These CNC machines are designed for routing all types of wood, 

routing or engraving plastics, and even etching or cutting tile. With 

some adaptation, non-ferrous metals could also be cut. 

The CNC Shark © and CNC Shark Pro © PLUS are by far the best 

value complete CNC system available. They are made of steel, aluminium 

and high-density polyethylene construction which makes 

them robust yet light weight and very stable. 

These impressive machines have 

• Power 

• Speed 

• Accuracy 

• Ease of use 

• High quality design 

• Local technical support & after sales service 

CNC ROUTER SHARK PRO PLUS © 


Motor 

Motor Speed 

Maximum work size 

Travel 

Jog Control 

Bearings 

Interface 

Thread 

Resolution 

Stepper Motor Specs 

Power supply to 

steppers 

Software 

PC requirements 

Control Program 



550 watt 1/4” shank capacity router (supplied) 

33,000rpm 

635 x 635mm (unlimited length by repositioning) 

X:605mm, Y: 605mm, Z: 127mm 

3 speed via software - keyboard or keypad 

12 linear bearings ( 4 on each axis) 

USB2.0 with on controller memory storage capability 

ACME precision threads 

Less then ±0.001” (±0.0254mm) 

9.368 kg - cm 1.8° steppers 

24 volt 

VCarve Pro 6.0 & Cut 3D software (included) 

Win 2000, XP or Vista, Pentium 4, 2.0GHz - 1Gb RAM 

(2gb recommended) 1024x768 graphics display - 

60mb free hard drive space 

Downloadable (free) 

900x600x550mm 

65/60kg 

CNC ROUTER SHARK © 


Motor 

Motor Speed 

Maximum work size 

Travel 

Jog Control 

Bearings 

Interface 

Thread 

Resolution 

Stepper Motor Specs 

Power supply to 

steppers 

Software 

PC requirements 

Control Program 



550 watt 1/4” shank capacity router (supplied) 

33,000rpm 

300 x 600mm 

X:300mm, Y: 600mm, Z: 105mm 

3 speed via software - keyboard or keypad 

12 linear bearings ( 4 on each axis) 

USB2.0 with on controller memory storage capability 

ACME precision threads 

Less then ±0.001” (±0.0254mm) 

9.368 kg - cm 1.8° steppers 

24 volt 

VCarve Pro 6.0 (included) 

Win 2000, XP or Vista, Pentium 4, 2.0GHz - 1Gb RAM 

(2gb recommended) 1024x768 graphics display - 

60mb free hard drive space 

Downloadable (free) 

900x450x550mm 

41/38kg 

Order no. 

CNC-SHARK-KIT-PP 

Price Order no. 

Price 

$5,995.00 CNC-SHARK-KIT 

$4,895.00 

Both machines are shipped complete (with only very minimal 

assembly required), and are basically ‘Plug and Play’. Vectric’s 

VCarve Pro V6.0 Design Software is included with both models, 

and this provides an easy to use point and click method of designing 

signs, patterns and complex repetitive cut jobs. Design work 

can be just as easily done in programs such as Corel Draw or 

Adobe Illustrator, in which you can export/import direct to VCarve 

Pro for tool path assignment and batch processing. VCarve Pro 

then creates the machine coding (G Code) required by the device 

driver interface (free download), to run the unit. The CNC Shark © 

and CNC Shark Pro © PLUS driver interface can also process files 

exported from other well recognised programs such as: Photo 

Carve, 3D Cut, BobCad, BobART, BobNestCad, Mach 3 and Lazy 

Cam. They are powered by an industrial duty 550W Bosch Blue 

GMR-1 router (included) and both units are supplied with hardware, 

transformer, controller, software, clamps, cables and router 

bit. All you need is a PC (or laptop), a USB port, a standard 3 pin 

appliance lead, some timber and an imagination. Get creative... 

the new age way! 


Machinery - Sanders 

CARBA-TEC ® 400MM WIDE 

DRUM SANDER 

Ideal for finish sanding or can be used 

as a finish planer for curly grained timber. 

Constructed from cast and machined alloy 

to provide great accuracy and trouble 

free operation. Features variable feed 

conveyor. 

CARBA-TEC ® 12” DISC 

SANDER WITH BRAKE 

A quality machine for any workshop. Cast 

iron body construction with an alloy table. 

Unlike most sanders that run at twice the 

speed this machine make it almost impossible 

to burn the wood being sanded and 

greatly prolongs the life of the paper. Mitre 

gauge included. See pg. 37 for replacement 

sanding accessories. 


Motor 

1hp, 240v 

Disc RPM 

1,440rpm 

Disc Diameter 300mm (12”) 

Table Size 

440 x 156mm 

Table Tilt 

45° up & 45° down 


Order no. 

Price 

DSB-12B $189.00 


Motor 

Conveyor motor 

Max. sanding width 

Max. sanding thickness 

Min. sanding thickness 

Drum diameter 



Order no. 

1hp, 240v 

50W 

400mm, 2 

pass=800mm 

135mm 

6mm 

130mm 

900 x 600 x 720mm 

55/53kg 

Price 

WDS-400 $739.00 

WDS-400-STAND $50.00 

Order no. Repl. Paper Price 

WDS-SP-60 60 grit wrap $17.00 





CARBA-TEC ® BENCH TOP 

OSCILLATING SPINDLE SANDER 

Includes 1/4”, 1/2”, 5/8”, 1-1/2” and 2” spindles 

and sleeves. Made in Taiwan. See website 

for replacement sanding accessories. 


Motor 

1/2hp, 240v 

Motor Speed 

1440rpm 

Oscillating stroke 25mm 

Oscillates per minute 30 

Table size/height 370 x 370mm/ 470mm 

Table tilt 

10° L & 45° R 


Order no. 

Price 

OVS-CT $459.00 

CARBA-TEC ® OSCILLATING 

SPINDLE SANDER 

This professional quality, freestanding spindle 

sander comes standard with a great 

range of 10 spindle tubes, and would be 

suited to both production workshops, 

schools, and serious home workshops. Includes 

1/4”, 3/8”, 1/2”, 5/8”, 3/4” 1”, 1-1/2”, 

2”, 3” and 4” See website for repl. sleeves. 


Motor 

1hp, 240v 

Motor Speed 

1725rpm 

Oscillating stroke 38mm 

Oscillates per minute 75 

Table size 

615x620mm 

Table tilt 0° to 20° & 0° to 45° 

Workshop Footprint 620x620x1100mm 


Order no. 

Price 

SS-3501 $1,595.00 

CARBA-TEC ® OSCILLATING 

‘BIG BOY’ SANDER 

Belt can be used in vertical or in horizontal 

mode. Quick action release under the main 

cast iron table allow for fast and easy switching 

between sanding modes. Includes mitre 

gauge, stand, sanding belt, main and spindle 

end table. See pg. 37 for replacement 

sanding accessories. 


Motor 

1-1/2hp, 240v 

Motor RPM 

2850rpm 

Belt size 

150 x 2260mm 

Sanding belt tilt 0° to 90° 

Sanding bobbin 4-1/2” 



Order no. 

Price 

BB-80S $1,049.00 

20 


Machinery - Sanders 

CARBA-TEC ® 6” X 9” 

COMBINATION 

BELT/DISC SANDER 

Our top selling sanding unit. Heavy cast 

construction with dual location, tilting work 

table. This latest model now features a 

NVR type safety switch, and includes a 

great metal stand. Belt can be used vertically 

and horizontally. Disc table tilts up to 

45°. Standard equipment includes graphite 

slip cloth underneath the belt. Also fitted 

with quick change hook and loop 9” 

disc. 

Includes stand, mitre gauge, sanding belt 

and hook and loop disc. See pg. 37 for 

replacement. sanding accessories. 


Motor 

3/4hp 

Belt size 

150 x 1220mm 

Disc Diameter 229mm (9”) 

Table Size Disc/Belt 310 x 160mm 

Table Tilt 0° to 45° 

Dust port 2 x 1-1/2” 

Mitre gauge 

Included 

Quick release belt Yes 



Order no. 

Price 

SB-609 $339.00 

CARBA-TEC ® 6” X 

12” COMBINATION 

OSCILLATING 

BELT/DISC 

SANDER 

Belt can be used in vertical 

and horizontal positions. 

Mitre gauge and starter 

abrasives (80 grit) included 

with the machine. See 

pg. 37 for replacement. 

sanding accessories. Now 

featuring a 2hp motor. 


Motor 

1-1/2hp, 240v 

Belt size 

150 x 1220mm 

Disc Diameter 

305mm 

Table size (Disc) 

177 x 406mm 

Table tilt 0° to 45° 


597 x 533 x 1409mm 


98/85kg 

Order no. 

Price 

SBD-6012QC $1,049.00 

CARBA-TEC ® 25” TWIN DRUM SANDER 

The variable speed rubberised feed belt is ideal for feeding panels 

without any damage to the underside of the panel. Featuring two 

independently adjustable drums. See website for replacement 

sanding wraps. Note: A minimum 1200cfm dust extractor required. 


Main/Conveyor Motor 

Max. sanding width 

Max./Min. sanding thickness 

Drum diameter 

Drum Speed 



Drum setting gauge. 

3hp, 240v/1.6hp 

620mm 

135mm/6mm 

127mm 

1440rpm 

1130 x 780 x 1300mm 

210/199kg 

Order no. 

Price 

MS-25B $2,395.00 


Machinery - Router Tables 

CARBA-TEC ® CAST IRON TOP 

ROUTER TABLE 

Features universal router mounting system. Fits 

most 1/2” routers. Table tilts to 45° for easy under 

table access. Fitted with removable key switch, 

cast iron dust housing, 2 spring steel hold-downs. 

Also features a split fence. Stand included. Working 

height 850mm. Standard 3/4” x 3/8” mitre slot for 

accessory and jig fitment. Router Bit not included. 


Motor 

Supplied by user 


Cast iron 

Fence Type 

Aluminium 2 piece 

Table size 

680 x 505mm 


Workshop footprint 900 x 780 x 1,120mm 


Order no. 

Price 

RT-017 $329.00 

KREG ® BENCHTOP ROUTER TABLE 

Built from the ground up as the portable solution to precision routing, 

this table provides trim carpenters and other mobile professionals 

with the quality materials and attention to detail that they’re only 

used to finding in large router tables. Standard 3/4” x 3/8” mitre slot 

for accessory and jig fitment. 


Motor 



Easy Slide Tm Micro Dot MDF 

Fence Type 

Anodized aluminium 

Table Size 

610x405mm 

Dust Port 2-1/2” 


720x515x508mm 


15/12kg 

Order no. 

Price 

KR-PRS2000 $299.00 

SLIDING ROUTER TABLE 

With independent infeed and outfeed fence, hold down work clamp, 

mitre gauge and gas struts to assist table lift. Suits most 1/2” routers. 

Includes stand. Router bit not included. 


Motor 



Cast iron with aluminium slide table 

Fence Type 

Aluminium 2 piece 

Table Size 

560x790mm 

Dust Port 

1x2-1/2” 



Order no. 

Price 

MS-RB $495.00 

22 


Machinery - Router Tables/Spindle Shapers 

KREG ® PRECISION ROUTER TABLE 

Whether you’re routing a simple dado, putting an edge on a countertop, 

or building an entire set of raised panel doors, this router table 

can help you finish projects faster, and with greater accuracy than 

ever before. Router not included. Standard 3/4” x 3/8” mitre slot for 

accessory and jig fitment. Adjustable stand included. 


Motor 



Easy Slide TM Micro-Dot MDF 

Fence Type 

Anodized aluminium 

Table Size 

810 x 610mm 

Dust Port 2-1/2” 


950 x 645 x 925mm 


44/38.5kg 

Order no. 

Price 

KR-PRS1040 $599.00 

ROUTER TABLE WITH TENONING ATTACHMENT 

This heavy duty solid cast iron table top is the most sophisticated 

router table we have ever seen. Includes stand, feather board and 

mitre gauge. Standard 3/4” x 3/8” mitre slot for accessory and jig 

fitment. Includes accurate sliding tenoning attachment. 


Motor 



Cast iron 

Fence Type 

Cast iron 1 piece 

Table Size 

665 x 475mm 

Dust Port 1 x 4” 


830 x 850 x 1110mm 


68/63kg 

Order no. 

Price 

RT-660 $849.00 

CARBA-TEC ® 3/4” 

SPINDLE SHAPER 

Extra large heavy cast iron table 

with surface ground finish 

with two spindle speeds and 

reverse. Independent infeed 

and outfeed fences feature 

precision micro-adjustment. 

Includes integral mobile base 

and standard 3/4” x 3/8” mitre 

track. 


Motor 

2hp, 240v 

Spindle Speeds 

5,000 & 8,000rpm 

Spindle Tilt 

No 

Table Size 

710 x 760mm 

Table opening dia. 

76, 89 & 178mm 

Spindle Size 3/4” 


710 x 760 x 1200mm 


160/145kg 

Order no. 

Price 

CTJ-310 $1,195.00 

CARBA-TEC ® TILTING HEAD 

SPINDLE MOULDER 

Sturdy cast iron and steel cabinet construction, tilting head, cast iron 

cutter guard, micro adjustable fence and sliding table make this a 

great choice for any workshop. 


Motor 

3hp, 240v 15A 

Spindle Speeds 

1800, 3000, 6000, 9000rpm 

Spindle Tilt 

-10° to+30° 

Table Size 

710 x 640mm plus slide table 

Table opening dia. 200mm 

Spindle Size 

30mm 

Workshop Footprint 1350 x 2200 x 1340mm 


Order no. 

Price 

SK-100T $1,995.00 


Machinery - Mortiser 

CARBA-TEC ® 

BENCHTOP CHISEL 

MORTISER 

This machine has the huge benefit 

of both lateral and longitudinal 

movement. Workpieces can be 

moved by moving the table instead 

of moving the workpiece, this 

eliminates error in that finer adjustments 

can be made. Refer to page 

33 for chisels and accessories. 

CARBA-TEC ® PROFESSIONAL 

CHISEL MORTISER 

Refer to page 33 for chisels 

and accessories. 

Stand included. 


Motor 

Chisel RPM 

Drill chuck capacity 

Table Size 

Travel 



1/2hp, 240v 

1400rpm 

13mm 

460 x 190mm 

Lateral-170mm, Longitudinal-70mm 

670x450x340mm 

42/40kg 

Order no. 

Price 

CT-HM16D $319.00 

CARBA-TEC ® CHISEL 

MORTISER 

A robust mortiser of cast iron 

construction, plenty of power 

to cut 19mm mortises. The 

table movement is controlled 

by two hand wheels, one 

for longitudinal and one for 

transverse movement; the 

movement is smooth and 

precise with dovetail slides 

and jib strips for longer life. 

Refer to page 33 for chisels 

and accessories. 


Motor (fan cooled ribber) 

1hp, 240v 

Chisel RPM 

1400rpm 


16mm 

Max. chisel size 

25.4mm 

Centre of chisel to fence 

145mm 

Chisel shank size 3/4” & 13/16” 

Chisel stroke 

220mm 

Max. height with 12.7mm chisel 220mm 

Table size 

400x150mm 


820 x 550 x 1720mm 


131/125kg 

Order no. 

Price 

CT-HM25D $689.00 


Motor (rolled steel) 

1hp, 240v 

Chisel RPM 

1720rpm 

Head tilt Yes, R/L to 30° 


13mm 

Centre of chisel to fence 

76mm 

Min./Max. chisel size 

6.35/25.4mm 

Chisel shank size 5/8” & 3/4” 

Chisel stroke 

170mm 

Table size 

200 x 450mm 

Table travel (longitudinal/Lateral) 370mm/70mm 


680 x 840 x 2000mm 


105/98kg 

Order no. 

Price 

SL-2500HB $1,595.00 

SL-2500HB-STAND $119.00 

CARBA-TEC ® 

HORIZONTAL 

MORTISER/BORER 

This is the ideal solution for a 

workshop that does not want to 

use their drill press as a mortising 

machine. The motor is powerful 

enough to cut most wood 

materials with ease. This machine 

is an excellent addition to any 

workshop. 


Motor 

Spindle speed 

Chuck capacity 

Table Size 

Travel 



3hp, 240v 

2840rpm, LH rotation 

0-20mm 

460 x 190mm 

Transverse-135mm, Longitudinal-175mm, Vertical-115mm 

780x860x1500mm 

120/90kg 

Order no. 

Price 

HM-3016 $799.00 

24 


Machinery - Drill Press 

RDP-116 CARBA-TEC ® 

RADIAL DRILL PRESS 

Radial drill presses are designed 

for complex compound 

angle drilling. Chuck to column 

capacity is variable from 130 - 

420mm due to the sliding horizontal 

column. 

DP-4116F 

CARBA-TEC ® 

PEDESTAL 

DRILL PRESS 

Designed to stand alone on the 

floor of the workshop. Cast iron 

pulley system reduces belt slip, 

vibration and produces more inertia 

due to the extra weight. 

DP-4119F 

CARBA-TEC ® 

PEDESTAL 

DRILL PRESS 

Designed to stand alone on the 

floor of the workshop. The drill 

press is fitted with provision for 

a work light between the chuck 

and the column. Cast iron pulley 

system reduces belt slip, vibration 

and produces more inertia 

due to the extra weight. 

DP-4132F 

CARBA-TEC ® 

PEDESTAL 

DRILL PRESS 

Extra heavy duty unit. Designed 

to stand alone on the floor of the 

workshop. Cast iron pulley system 

reduces belt slip, vibration and 

produces more inertia due to the 

extra weight. We think its a very 

worthwhile improvement. 

DP-4116B 

CARBA-TEC ® BENCH 

DRILL PRESS 

Designed to sit on top of a 

short workbench or stand due 

to the shorter column. The drill 

press is fitted with provision for 

a work light between the chuck 

and the column (bulb not supplied). 

Cast iron pulley system 

reduces belt slip, vibration and 

produces more inertia due to 

the extra weight. We think its a 

very worthwhile improvement. 

3-16mm chuck incl. 

Specifications RDP-116 DP-4116B DP-4116F DP-4119F DP-4132F 

Motor 1/2hp 3/4hp 3/4hp 650W 2hp 

Speed steps 5 speed 16 speed 16 speed 16 speed 12 speed 

Speed range 500-2450rpm 210-3340rpm 210 - 3340rpm 120-3000rpm 150-2700rpm 

Chuck capacity 1 to 13mm 3 to 16mm 3 to 16mm 3 to 16mm 3 to 16mm 

Quill 55mm 60mm 60mm 65mm 92mm 

Chuck/quill travel 80mm 82mm 82mm 82mm 120mm 

Chuck to base 1,225mm 520mm 1,135mm 1,135mm 1,110mm 

Taper N/A MT2 MT2 MT2 MT4 

Tilt type & degree Head 45°L 90°R Fixed Head Fixed Head Fixed Head Fixed Head 

Table tilt 360° Table, 360° Table, 360° Table, 360° Table, 360° 

Column to drill centre 130-420mm 160mm 160mm 180mm 255mm 

Chuck to table max. 700mm 320mm 690mm 680mm 550mm 

Work light provision No Yes Yes Yes Yes 

Table size 300mm Dia. 305mm dia. 305mm dia. 290x290mm 470x420mm 

Base size 240 x 410mm 240 x 410mm 240x410mm 270x440mm 450x580mm 

Workshop footprint 360x830x1640mm 340x630x970mm 340x630x1580mm 360x650x1620mm 620x820x1730mm 

Drilling capacity 1/2” steel 3/4” steel 3/4” steel 3/4” steel 1-1/4” steel 

Shipping/Net weight 65/60kg 57/53kg 66/60kg 86/80kg 148/138kg 

Price $359.00 $339.00 $379.00 $469.00 $799.00 


Machinery Accessories 

24” TAPER CUTTING JIG 

Slides against the fence on any saw bench. 

Allows you to accurately cut tapers 0° to 15°. 

1kg. 

Order no. 

Price 

7726 $19.00 

CARBA-TEC ® TENONING JIG 

Simplifies cutting tenons and joints on your 

table saw. Fits most saws with a 3/8” x 3/4” 

mitre gauge groove, and handles stock up 

to 3-1/4” thick. 

Order no. 

Price 

CTJ-183 $109.00 

ROCKLER TABLESAW CROSSCUT SLED 

No more squinting at those tiny scales — 

this Crosscut Sled’s large protractor scale 

lets you precisely tune your angles for airtight 

miters and crosscuts. Easy-to-read 1/2° 

graduations and a hair-line indicator ensure 

error-free setups, while a heavy-duty aluminum 

fence, adjustable MDF fence face, and 

smooth-sliding components delivers versatile 

and precise operation. 

Order no. 

Price 

RK-33113 $215.00 

SILVERGLIDE DRY SLIP 

Mainly used to protect cast iron table tops 

from rust. It can also provide lubrication for 

highly resinous timbers while machining on 

tablesaws and jointers etc. 

Order no. 

Price 

SILVERGLIDE-250 $29.00 

SILVERGLIDE-1LTR $69.00 

PLANER & JOINTER BLADE SETTING 

JIG. (MAGNETIC) 

This two piece jig set will help you install 

new planer blades in perfect alignment, with 

an accuracy of ±.025mm. 

Order no. 

Price 

PSJ-01 $59.00 

DELUXE SUVA GUARD SYSTEM 

An ideal solution for table saw safety and 

dust control. When connected to a dust collection 

system, this suva guard captures the 

dust thrown up by your table saw blade. 

Order no. 

Price 

DSG-1 $229.00 

TAPER/STRAIGHT LINE JIG 

If you’ve ever struggled to make a lengthy 

angled cut, this is the jig for you. With a 

simple indexed angle setting system, heavy 

duty hold-down clamps and a smooth sliding 

design, it makes tapered cuts fast, easy 

and precise. Perfect for chair legs, table legs 

and more. Plus, with the miter bar removed 

it doubles as a stable straight line ripping jig. 

Includes 36” miter bar. Measures 31-5/8’’ x 

7-3/4’’. 1/2’’ thick MDF. 

Order no. 

Price 

RK-21597 $95.00 

PROTRACTOR AND SAW GUIDE 

Features 18° guide bar for precision sawing 

and routing. Allows accurate angle cutting. 

Order no. 

Price 

PSG-450 $15.00 

SHAPER/ROUTER TABLE SLED 

For safer tenoning and copying operations. 

This unit firmly clamps your timber for end 

grain cutting on router and shaper tables. 

Order no. 

Price 

CTCS-1 $149.00 

HEAVY DUTY BIESEMEYER STYLE 

TABLESAW FENCE AND RAILS 

Offers accuracy and repeatability greatly 

enhancing your productivity and craftsmanship. 

Order no. 

Price 

TSC-FENCE $309.00 

CARBA-TEC ® UNIVERSAL FOLDING 

MITRE SAW STAND 

Works with all mitre saws. Lightweight but 

strong aluminium construction allows for 

easy transport between jobs. 

Order no. 

Price 

CTB-07 $199.00 

26 



BALL BEARING ROLLERS 

These ball bearing roller sets 

rotate in any direction, allowing 

you free movement of your 

stock. Unlike other types of rollers, 

these 360° universal transfer 

bearings excel when materials 

are pushed in any direction. 

They mount easily on a piece of 

plywood, giving you your own 

outfeed table for saws, finishing 

tables and assembly lines. 

Order no. Size Price 

AN-16 16mm $21.00 

AN-25 25mm $31.00 

HEAVY DUTY SINGLE 

ROLLER STAND 

Rated to 227kg. Height is adjustable 

from 670 to 1100mm. 

Post is tapered for strong and 

positive locking. 

Order no. 

Price 

CR-2197 $83.00 

ROLLER STAND WITH UNIVERSAL CLAMP 

A universal clamp allows this roller to be attached to almost any 

work surface. 

Order no. 

Price 

S-4401 $62.00 

HEAVY DUTY TOOL 

STAND 

Use this stand to hold your 

portable thicknesser or other 

bench mounted machine. Stand 

includes MDF top and adjustable 

feet. 

Order no. 

Price 

PS-330 $79.00 

BASIC MODEL ROLLER 

STAND 

Adjustable in height from 660 to 

1000mm. Max. height: 1 metre. 

Order no. 

Price 

JG-300 $31.00 

EXPANDING CONVEYOR ROLLERS 

This conveyor makes movement of large 

workpieces easy. Simply connect the conveyor 

to the machine or workpiece area 

you’ll be using it with, extend the bed to 

the required length and set the brakes. 

Next, adjust the height to meet the entry 

point required for your workpieces and 

you’re ready to go. Assembly adjusts 

from 450mm to 1.3m in length and 670 to 

940mm in height. 

Order no. 

Price 

HDC-1131 $241.00 

UNIVERSAL ROLLER & 

BALL STAND 

Converts in seconds from roller 

stand to ball bearing stand. 

Max. height: 1metre. Stand 

rated to 95kg 

Order no. 

Price 

S-5008 $73.00 

ROLLER STAND WITH 5 

ROLLERS 

Adjustable in height from 670 to 

1100mm. Stand rated to 227kg. 

Order no. 

Price 

CR-3582 $115.00 

ROLLER STAND WITH 9 ROLLERS 

Height adjustable from 670 x 1100mm and 

easily folds up for storage. Both posts are 

tapered so locking is positive and strong. 

Order no. 

Price 

CR-5811 Stand $199.00 

CR-ROLLER 4 Pack Rollers $29.00 



MOBILE 

BASE SET 

Set includes corner 

brackets, wheels, 

castor assembly, foot 

pedal and instructions. 

Maximum carrying 

load 150kg. 

Order no. 

Price 

MB-6 $52.00 

CASTOR WITH 

BRAKE 

Perfect for heavy 

machines, with a load 

Heavy duty castor 

with parking brake 

and locking swivel top 

. Capacity of 60kg per 

castor. 

Order no. 

Price 

CWB-2 $13.00 

LARGE FEATHERBOARD 

Supplied with an expanding clamping system 

for use with 3/4” (19mm) mitre slots for 

horizontal use. This clamping system can 

be used independently of the featherboard 

for setting up customised jigs as well. 

Order no. 

Price 

FBL-2 $16.00 

UNIVERSAL MOBILE BASE WITH 

227KG CAPACITY 

Machine size is no longer an issue as this 

mobile base is truly a universal fit. This 

base expands from a square of 300mm to 

914mm up to 508mm x 1320mm in a rectangular 

configuration. Easy assembly. 

Order no. 

Price 

CMB-500 $83.00 

UNIVERSAL MOBILE BASE WITH 

320KG CAPACITY Extends from 355mm 

square or up to 558 x 1370mm in rectangular 

configuration. Slotted rails adjust to an 

exact fit on your machine. (Not shown) 

Order no. 

Price 

CMB-700 $104.00 

ADJUSTABLE FEET 

Sold in packs of 4, these adjustable feet are 

the perfect addition to utilitarian projects, 

machines or as replacements. All are 1” 

long. 


CAF-35 35mm, 1/4” x 20tpi thread $8.00 



DIAMOND HONE 

400 & 600 grit diamond stones for sharpening 

HSS or tungsten carbide jointer and 

planer blades without removing blades from 

your machine. 

Order no. 

Price 

K-10-D $39.00 

VERITAS ® PLANER BLADE SHARPENER 

Normally, nicked blades will require a sophisticated 

grinder or a trip to a commercial 

sharpening service. Veritas’ ® planer blade 

sharpener is designed to restore blades 

dulled from normal use even if they have 

minor nicks. It clamps blades up to 200mm 

wide for sharpening on PSA backed abrasives. 

Order no. 

Price 

05M25-01 $79.00 

PUSH BLOCKS 

An invaluable accessory when passing material 

over a rotating cutterhead. Keeps fingers 

and hands away from the cutting area 

and provides a virtually non-slip grip with its 

rubber footing. A necessity for woodworkers 

of all skill levels. 

Order no. 

Price 

PB-1 $10.00 

EUROPEAN STYLE PUSH STICK 

Safety device for router tables and saw 

benches. Helps keep your fingers safely 

attached to your hand. 

Order no. 

Price 

PS-20 $5.00 

ROLLER AND BRACKET 

Make your own rolling infeed/outfeed table. 

Roller length 400mm, diameter 57mm. 

Order no. 

Price 

CT-874200 $20.00 

CARBA-TEC ® METAL DETECTOR 

The sensor head has a diameter of 135mm 

and will detect most metal objects that will 

be a danger to your planer or thicknesser 

blades. Overall length is 395mm. 

Order no. 

Price 

MMD-80A $59.00 

FIVE PIECE SAFETY KIT 

A complete set of safety devices for use with 

various machines. Kit includes; pushblocks, 

featherboard and 3 push sticks. 

Order no. 

Price 

SK-5PCE $16.00 

28 



Magswitch Workholding System 

REVERSIBLE 

FEATHERBOARD 

Mounts to the 

universal mounting 

base and Magjigs. 

Is reversible for 

left and right hand 

feeds. Mounting base and magnets not incl. 

Order no. 

MAG-0131 

VERTICAL 

ATTACHMENT 

Designed for use 

with the MAG-0328, 

it aids in providing 

steady downward 

pressure to your 

stock. 200x100x90mm. Mounting base and 

magnets not incl. 

Order no. 

MAG-0178 

FEATHERBOARD STARTER KIT 

The perfect entry into the Magswitch Workholding 

system. Includes Reversible Featherboard attachment, 

Universal Mounting Base and two 30mm MagJigs. 

Order no. 

MAG-0134 

Price 

$12.00 

Price 

$15.00 

UNIVERSAL 

MOUNTING BASE 

Allows you to attach 

a variety of current 

and future Magswitch 

attachments. 

217x110x20mm. Requires 20 or 30mm 

Magjigs. 

Order no. 

MAG-0112 

Price 

$15.00 

DUAL ROLLER 

FENCE 

ATTACHMENT 

Helps support a 

tall panel, hold 

down a long piece 

of wood and steady your resaw projects. 

218x112x26mm. 

Order no. 

MAG-0130 

Price 

$75.00 

Price 

$22.00 

30MM PRO TABLE FEATHERBOARD 

Fast, easy setup and adjustment. It has 50% 

greater holding power than the standard 

table featherboard. 172x180x19mm. 

Order no. 

Price 

MAG-0328 $59.00 

30MM PRO FENCE FEATHERBOARD 

Provides downward pressure on jointer 

tables, and steel fences used on router 

tables, shaper tables and table saws. 

227x70x26mm. 

Order no. 

Price 

MAG-0329 $59.00 

UNIVERSAL 

TRACK TOOL 

ATTACHMENT 

Mounts to the 

Universal Mounting 

Base and Magjigs. 

It accommodates 

all hardware on the 

market. Make your own jigs, fixtures, stops, 

fences, zero clearance fences and more. 

Mounting base and magnets not incl. 


MAG-0132 18” 

MAG-0370 36” 

$29.00 

$53.00 

RESAW FENCE ATTACHMENT 

This unique ball-bearing based resaw fence 

allows wood to flow more smoothly than anything 

you have ever tried. 218x112x27mm. 

HORIZONTAL 

RISERS 

Great to use when 

working with taller 

stock. Install one 

level of risers, or 

two, to handle taller 

work piece more efficiently and safely. 

Featherboards shown not included. 

Order no. 

MAG-0155 

Price 

$8.00 

THIN STOCK HOLD DOWN 

Three tools in one! Mounts to the Universal 

Mounting Base and Magjigs. Ideal for thin 

stock hold down or infeed/outfeed on a table 

saw. Enhances safety by keeping your 

fingers away from the blade while also minimizing 

chatter for clean cuts. Mounting base 

and magnets not incl. 

UNIVERSAL 20MM FEATHERBOARD 

Low profile, double-sided, works to improve 

your cutting results on either side of the 

blade. 175x100x26mm. 

Order no. 

Price 

MAG-0015 $39.00 

30 & 50MM 

MAGSQUARES 

Use as guides or 

positional stops 

for workholding. 

More versatile than 

clamps, faster and 

easier to use. 


MAG-0054 30mm $39.00 

MAG-0106 50mm $169.00 

20 & 30MM 

MAGJIGS 

Use in multiple jigs, 

switch in and out off 

fixtures with ease. 

Works on any steel or 

cast iron surface. 

Order no. 

MAG-0125 

Price 

$17.00 

Order no. 

MAG-0362 

Price 

$19.00 


MAG-0004 20mm $23.00 

MAG-0005 30mm $32.00 



KREG ® 

PRECISION 

MITRE GAUGE 

SYSTEM 

Cut perfect mitres 

consistently with our 

Precision Mitre Gauge System. 

A number of unique features 

makes this one of the most 

precise mitre gauges on the 

market today. Factory calibrated 

accuracy starts with a 

gauge head that is machined on 

a computerized milling machine 

for absolute precision. An 

easy-to-read Vernier scale enables 

precise angle adjustments up to 1/10th of 

a degree. Five patented bar adjusters take up 

the play in the mitre slot for a perfect fit. A 24” 

fence section with patented Flipstop and selfadhesive 

measuring tape is included. 

• Factory calibrated... perfect right out of the box 

• Positive stops at 0, 10, 22-1/2, 30, and 45 degrees 

• Brass pin allows quick changes between positive stop angles 

• 24” bar that is 3/8” tall x 3/4” wide has 5 bar adjusters eliminates the play between the 

bar and the mitre slot 

• 24” Fence section with patented Flipstop 


KR-KMS7102 Precision Mitre Gauge System 

$199.00 

KR-KMS7101 Precision Mitre Gauge 

$135.00 

KR-KMS7103 Precision Mitre Gauge Fence 

$99.00 

KREG ® TRUE-FLEX TM FEATHERBOARD 

Designed so that each finger will provide 

consistent and optimum pressure, this featherboard 

is made from an extremely durable 

plastic composite body and even includes an 

exclusive wedge-lock system which allows 

the featherboard to be secured to a variety 

of shop tools without the need for additional 

hardware. Available in single or twin pack. 

Single featherboard comes with wedge-lock 

hardware which works in t-slots or mitre slots 

on tablesaws, router tables, band saws and 

more. The twin pack comes as an extended 

version for use in tandom. When used together 

they provide additional support for 

taller workpieces resulting in faster, safer and 

higher quality cuts. 

Order no. 

Price 

KR-PRS3010 Single $25.00 

KR-PRS3020 Twin Pack $45.00 

KREG ® MITRE ATTACHMENT 

Easily attached to a swing Stop TM or Production 

Stop, the Mitre Attachment supports the 

mitred end of the board on two surfaces to 

make a more accurate cut. 

Order no. 

Price 

KR-KMS7831 $25.00 

KREG ® 

PRODUCTION STOP 

Features dual lens cursors and the unique 

ability to be moved to either side of the saw. 

Order no. 

Price 

KR-KMS7800 $25.00 

KREG ® MULTI-PURPOSE PRO PUSH 

STICK Adds true speed and convenience 

to every cut you make! Well balanced heavy 

duty impact resistant. 

Order no. 

Price 

KR-KMA1000 $19.00 

KREG ® PRECISION TRAK & STOP 

MEASURING SYSTEM 

Designed to take the guesswork out of 

cutting wood to length. Kit contains 8’ (4x2’ 

sections) of anodised aluminium trak. 

Order no. 

Price 

KR-KMS8000 $179.00 

KREG ® SWING STOP 

Uniquely designed to swing out of the way 

when workpieces are pressed into its face. 

Order no. 

Price 

KR-KMS7801 $39.00 

KREG ® MAGNETIC DRAWER SLIDE 

MOUNTING TOOL 

The strong, rare earth magnets hold most 

types of metallic drawer slides in place freeing 

your hands for the rest of the job. 

Order no. 

Price 

KR-NZ03 $39.00 

30 



ZERUST ® ICT ® 

VAPOUR 

CAPSULES 

These capsules 

emit powerful corrosion 

inhibiting molecules 

into an enclosure 

that settle on metal surfaces and 

protect them from corrosion. 

Order no. 

Price 

ZE-VC2-1 $15.00 

A. B. 

KREG ® PRECISION BANDSAW FENCE 

Introduce a new level of accuracy to your band saw with our Precision 

Band Saw Fence. We’ve designed this fence with noted 

band saw expert Mark Duginske to produce an unprecedented 

level of rigidity, adjustability, and precision. The fence is adjustable 

in two dimensions for ease in setting it parallel to the blade. 

Cutting accuracy and repeatability is further enhanced by the 

precision lens cursor that reads off the included scale. Mounts 

to most 14 inch band saws including CARBA-TEC ® , Delta, Jet, 

and many others. Available with an optional Micro-Adjuster and 

Resaw Guide that allows drift angle adjustments to made while 

cutting. 


KR-KMS7200 A. Precision Bandsaw Fence $149.00 

KR-KMS7213 B. 4.5” Resaw Guide $23.00 

KR-KMS7214 C. 7” Resaw Guide $26.00 

KR-KMS7215 D. Micro Adjuster $19.00 

C. 

D. 

PROFESSIONAL RIP FENCE 

“A stable and accurate enhancement to your 

14” bandsaw. Fits most 14” machines” 

Order no. 

Price 

RF-3 $99.00 

KREG ® DRAWER SLIDE MOUNTING 

BRACKETS 

For both face-frame and faceless cabinets, 

aligning the drawer box to full-extension 

slides are simple with this tool. 

Order no. 

Price 

KR-NZ03-B $13.00 

KREG ® PRECISION ROUTER TABLE 

INSERT PLATE 

This rugged 3/8” phenolic plate was designed 

to accept nearly any router, without 

the use of a “swiss-cheese” style pre-drilled 

surface. 

Order no. 

Price 

KR-PRS3030 $79.00 

ROUTER TABLE INSERT KIT 

228 x 305mm approx. Ideal for making 

your own router table at home. Made from 

Bakelite and adaptable to accept most common 

routers. 

Order no. 

Price 

RTS-1 $35.00 

GUIDE BLOCKS WITH 

ROLLER BEARINGS 

(SET OF FOUR) 

Enables more accurate, 

straighter cuts than 

standard blocks. Suits any 

bandsaw that accepts 1/2” x 1/2” 

guide blocks. 

Order no. 

Price 

AB-199021 $35.00 

PRECISION 

ROUTER 

TABLE 

INSERT 

PLATE LEVELERS 

These unique levelers 

are the easiest way to 

add an insert plate to your shop-built router 

table. 

Order no. 

Price 

KR-PRS3040 $25.00 

Bottom Guide 

Top Guide 

DELUXE 14” BLADE GUIDE SET 

The addition of this fully featured top and 

bottom industrial style guide system will 

enhance the accuracy of your bandsaw 

beyond measure. 

Order no. 

Price 

SW-1401-GUIDE $85.00 

BLADE BRAZING JIG 

For blades 1/16” to 1-1/4”. Brazed joints are 

stronger than the base metal of the original 

blade. This jig is used to repair broken bandsaw 

blades quickly, easily and inexpensively. 

Kit includes: brazing jig, flux, brush, silver alloy 

and instructions. A separate butane torch 

is required to use this brazing kit. Our professional 

mini butane torch is perfect for the 

job and also for any small brazing jobs such 

as in jewellery making/ repairing etc. Operating 

temp. - 1300˚C. Torch is supplied without 

fuel. Note: Can be used to weld most metals 

except aluminium. 


CT-BBJ Brazing Kit $35.00 

MT-790 Butane Torch $35.00 



CARBA-TEC ® STANDARD MITRE 

GAUGE 

Fits most cast table machinery with 3/4” x 

3/8” mitre slots, or any of our 3/4” x 3/8” 

mitre tracks. 

Order no. 

Price 

MGT-01 $29.00 

INCRA MITRE V27 

Is engineered to provide high performance. 

It’s no-nonsense design and compact size 

make it the most affordable Incra mitre 

gauge ever. 

Order no. 

Price 

IN-MITERV27 $79.00 

INCRA MITRE V120 

Puts high resolution, repeatability and accuracy 

within the budget or all woodworkers. 

An incredible 120 angle stops are laser cut 

into the steel protractor. 

Order no. 

Price 

IN-MITERV120 $109.00 

INCRA 1000HD MITER GAUGE 

Combine a high-resolution protractor with 

the industry’s smoothest adjustable miter 

bar, a telescoping IncraLOCK Cut-off Fence 

& Flip Shop Stop, and a steel vernier scale 

that reads to 1/10° and you’ve got a winner 

that will improve the quality of any project. 

Order no. 

Price 

IN-MITER1000HD $239.00 

DELUXE ALIGNMENT SYSTEM 

Check table saw alignment, arbor shaft 

run-out, blade and flange run-out and fence 

alignment and straightness. 

Order no. 

Price 

DAS-1 $105.00 

4 5 6 8 12 

VERITAS ® POLY GAUGE 

This gauge, which is accurate to 1/2° on 

every angle, can be used for many different 

machines. Used flat, the gauge is ideal for 

setting mitre fences or for layout work. Used 

vertically, the slotted knob becomes a stabilising 

base that holds the gauge erect so that 

you have both hands free for adjusting and 

locking a fence or blade. Ideal for frames, 

tubs and planters, glued up cylinders for 

turning, any job that requires precise setting 

for 4, 5, 6, 8 or 12 sided mitres. Made from 

brass and hardened aluminium, the gauge 

measures 8-1/2” x 6” overall. 

Order no. 

Price 

05N14-01 $49.00 

MORTISE CHISEL SHARPENING KIT 

Sharpens the inside of square chisels with a 

6 flute HSS cutter. After sharpening the four 

outside faces, the chisel should be deburred 

using the flat diamond stone supplied. There 

is no other successful way to sharpen this 

type of chisel. An essential accessory for 

all chisel mortisers. Suit 1/4”, 3/8” and 1/2” 

chisels. 

Order no. 

Price 

MCS-01 $59.00 

CARBA-TEC ® 1/4HP JUNIOR 

POWERFEED 

This lightweight unit is nevertheless powerful 

enough to feed stock into circular saws, 

spindle moulders, sanders, routers and planers, 

etc. The three rubber roller head can be 

articulated vertically or horizontally to suit almost 

any feeding job. Four feed speeds 5, 

6.5, 8 and 11m/min are possible and give 

this machine the versatility needed in almost 

any home or small workshop. Motor is fitted 

with forward and reverse switch. This power 

feed will promote productivity in your shop 

and provides added safety as well. 


Column Diameter 

Max. Capacity under rollers 

Reach 

Roller Size 

50mm 

127mm 

247mm 

77mm 

Order no. 

Price 

AF-32 $695.00 

CARBA-TEC ® 1/2HP CABINETMAKERS 

POWERFEED 

This heavy duty unit has many characteristics 

that enable it to feed stock into circular 

saws, spindle moulders, sanders, routers 

and planers, etc. With its high capacity for 

holding, the three rubber rollers are suitable 

for large workpieces. The three rubber roller 

head can be articulated vertically or horizontally 

to suit almost any feeding job. Four feed 

speeds are possible 5.8, 9, 15 and 23m/ 

min, approx. only) and give this machine the 

versatility needed in almost any professional 

workshop. Motor fitted with forward/reverse 

switch. This unit will promote productivity 

and provide added safety too. 


Column Diameter 

Max. Capacity under rollers 

Reach 

Roller Size 

50mm 

177mm 

406mm 

100mm 

Order no. 

Price 

AF-308 $1,095.00 

32 



OPTIONAL MOUNTING BRACKET 

For mounting your power feed unit to almost 

any spindle moulder. Unit fits onto tables 

using clamping bracket and bolts. 

Order no. 

Price 

CTUB-1 $85.00 

5 PIECE MORTISE CHISEL SET 

Set includes 1/4”, 5/16”, 3/8”, 1/2” and 5/8” 

chisels with auger bits to suit. Chisels fit 3/4” 

bushed machines. 1.17g. 

Order no. 

Price 

MCS-5 $32.00 

DIGITAL HEIGHT GAUGE 

This economically priced gauge is the perfect 

addition to your machine setup kit. Used 

primarily on router tables and tablesaws, this 

gauge can also be used horizontally when 

positioning a fence as well. The LCD screen 

reports measurements in metric, imperial 

and fractional inches all at the touch of a 

button. Measurement resolution as follows: 

0.05mm, 0.002” and 1/32” (±0.1mm/0.004”). 

The nylon body houses rare earth magnets in 

the feet when used vertically, allowing near 

hands free setup of equipment. Button cell 

battery included. 

Order no. 

Price 

RHG-1 $29.00 

MULTI-STOP 

A quick release 

positioner that attaches 

to fences, 

tables and work 

pieces to make 

routing, shaping or sawing more accurate 

and less time consuming. 

Order no. 

Price 

CT-MS2 $17.00 

DRILL PRESS WORK SUPPORT 

STAND WITH ROLLERS 

Two roller stand style rollers, 450mm wide 

are fully adjustable, for height and width giving 

maximum versatility. 

Order no. 

Price 

DP-1353 $59.00 

DRILL PRESS TABLE 

This accessory effectively expands the work 

area for your drill press allowing you to work 

with larger projects on small tables. Drill 

press not included. 

Order no. 

Price 

DPT-1 $99.00 

CHISEL MORTISE KIT FOR DRILL 

PRESSES 

Drill square holes for mortise and tenon 

joints. Kit will suit the following quill sizes; 40, 

48, 55, 60 and 66mm. Kit includes 5 piece 

chisel set (MCS-5). 

Order no. 

Price 

MAS-2-KIT $99.00 

Optional square chisels for mortising 

WMC-14 1/4” $15.00 

WMC-38 3/8” $15.00 

WMC-12 1/2” $15.00 

WMC-58 5/8” $22.00 

WMC-34 3/4” $29.00 

POLYCARBONATE SHEETS 

Perfect for making custom transparent base 

plates, safety shields, templates, jigs, and 

other accessories for your workshop. 


46J86-12 1/4” $22.00 

46J86-13 3/8” $34.00 

UHMW POLYETHYLENE 

This is a type of plastic that is dense, tough, 

rigid, impervious to moisture and most important, 

has a very low coefficient of friction. 


46J90-15 3/8”, 3/4”x24” $7.50 

46J90-10 1/4”, 4”x24” $14.00 

46J90-11 3/8”, 4”x24” $19.00 

46J90-12 1/2”, 4”x24” $32.00 

46J90-14 3/4”, 4”x24” $39.00 

T-TRACK INTERSECTION KIT 

Slide your jigs and fixtures in almost any direction! 

- Used with our 3/4” wide aluminium T-track, 

this 4-piece kit allows you to make the T- 

track intersection you need. 

Order no. 

Price 

RK-22209 $29.00 



A. 

B. C. D. E. F. G. 

KREG ADHESIVE TAPES 

This 1/2” wide, 3.5m long, self-adhesive measuring tape fits snugly 

into the indentation on the topside of our Top Trak and Heavy Duty 

Trak. Choose the correct tape orientation left-to-right reading to the 

right of the saw blade, right-to-left reading to the left of the saw blade. 

Metallic tape is highly scuff resistant and can be trimmed to length. 


A. KR-KMS7511 Kreg Trak Clamp 

B. KR-KMS7507 Kreg Mini Trak 24” 



C. KR-KMS7303 Kreg Jig & Fixture Bar 

D. KR-KMS7432 Kreg Combo-Trak 32” 

D. KR-KMS7448 Kreg Combo-Trak 48” 

E. KR-KMS7712 Kreg Top Trak 24” 

E. KR-KMS7714 Kreg Top Trak 48” 

F. KR-KMS7702 Kreg Heavy Duty Trak 2” 

F. KR-KMS7704 Kreg Heavy Duty Trak 4” 

G. KR-KKS1020 Kreg Klamp Trak 33-3/4” 

$7.00 

$15.00 

$19.00 

$24.00 

$29.00 

$39.00 

$49.00 

$29.00 

$45.00 

$49.00 

$75.00 

$59.00 


KR-KMS7728 R to L $12.00 

KR-KMS7729 L to R $12.00 

ROCKLER 915MM MULTI TRACKS FOR 

JIGS AND CUSTOM FENCES 

With Universal T-Tracks on every face, these 

36” tracks are full of potential - use them to 

create custom fences, jigs and fixtures. Once 

assembled, the multiple tracks give you 

countless options for attaching stops, holddowns, 

sub-fences and more. Available in 

2-1/4” and 3” heights. 


RK-35605 2-1/4” $45.00 

RK-34262 3” $59.00 

I. 

A. 

A. 

F. 

F. 

H. 

I. 

H. 

G. 


A. 12K79-22 1/4” T-slot x 2 

$15.00 

A. 12K79-24 1/4” T-slot x 3 

$22.00 

A. 12K79-28 1/4” T-slot x 4 

$28.00 

B. 05J21-15 1/4”-20 T-slot nuts (10 pack) $5.00 

C. 12K79-70 1/4”-20 x 1” T-bolts (10 pack) $5.00 

D. 12K79-72 1/4”-20 x 2” T-bolts (10 pack) $7.00 

E. 12K79-80 Hex Bolt Washers (10) 

$8.00 

12K79-32 5/16 T-slot x 2 

$20.00 

12K79-34 5/16 T-slot x 3 

$29.00 

12K79-38 B. C. 5/16 D. T-slot x 4 

$38.00 

12K79-60 5/16-18x1” T-slot nuts (10) $9.00 

12K79-62 5/16-18x1” T-bolts (10) 

$7.00 

12K79-64 5/16-18x2” T-bolts (10) $12.00 

VERITAS 12K79-66 TM T-SLOT TRACKS Hex Bolt Washers (10) 

$8.00 

F. 12K79-42 2” Double T-slot 

$16.00 

F. 12K79-44 3” Double T-slot 

$23.00 

G. 16J60-80 Undercut Slotting Bit 

$29.00 

H. 12K79-06 2x3/4” Slot Extrusion ea. $19.00 

H. 12K79-07 3x3/4” Slot Extrusion ea. $35.00 

I. 46J90-15 3/8” UHMW, 3/4” x 24” 

$7.50 

VERITAS TM BENCH BOLTS 

Bolts are 6” long and 1/2” in diameter. 

The nuts are 25x25mm and will fit perfectly 

into a 1” hole. 

Order no. 

Price 

05G07-02 $45.00 

ROCKLER MULTI TRACK BRACKETS 

Combine your Multi Tracks with these extruded aluminium brackets 

to form L-shaped fences. Center slots accept T-bolts (not included) 

to connect Multi Tracks to any built-in T-Track. Includes two brackets, 

eight 1/4’’-20 bolts, eight washers, and eight T-Track nuts to secure 

brackets to Multi Tracks (35605, 34262). Available in 50mm x 50.8mm 

and 32mm x 50.8mm sizes. 


RK-33338 32mm $25.00 

RK-35961 50mm $25.00 

18” MITRE BAR 

Use these handy mitre bars to aid the 

sliding action of custom jigs and fixtures. 

Nylon set screws allow perfect adjustment 

in 3/4” x 3/8” mitre gauge slots. 

Order no. 

Price 

CYH-987 $21.00 

32” MITRE TRACK 

Accepts any standard mitre 

gauges and mitre bars at 3/4” 

wide and is easily installed into 

home-made router tables, jigs and 

other similar devices. 

Order no. 

Price 

ALMG32 $27.00 

34 



A. 

R. 

V. 

J. 

DD. 

K. 

B. 

W. 

C. 

S. 

M. 

L. 

D. 

T. 

CC. 

JIGS & FIXTURES HARDWARE 

The taper handle and ball, clamping, sure-grip, four-arm, wing 

and bar knobs are all made from durable plastics, the jig handle, 

wing nuts and thumbscrews are made from malleable iron 

for extended service. 

O. 

N. 

BB. 

X. 

E. 

Y. 

F. 

U. 

P. 

Z. 

AA. 

Q. 

H. 

G. 

Order no. Price 

Description 

1/4”-20tpi 

A 1” dia, Ball Head Knob (F), ea. 00M55-01 $3.00 

B 1-1/4” dia. Ball Head Knob (M), ea. 00M55-05 $5.00 

C 3-7/8” Handle (F), ea. 00M53-01 $8.00 

D 3-7/8” Handle (M), ea. 00M53-02 $15.00 

E 1” Clamping Knob (F), ea. 00M56-20 $3.00 

F 1” Clamping Knob (M), ea. 00M56-21 $3.00 

G 1-3/4” Clamping Knob (F), ea. 00M56-10 $4.00 

H 1-3/4” Clamping Knob (M), ea. 00M56-11 $5.00 

J. 1-1/2” Sure-Grip (F), ea. 00M55-20 $4.00 

K. 1-1/2” Sure-Grip (M), ea. 00M55-21 $4.00 

L. 1-1/2” Four-Arm Knob (F), ea. 00M55-30 $6.00 

M. 1-1/2” Four-Arm Knob, (M), ea. 00M55-31 $4.00 

N. 1-1/8” Wing Knob (F), ea. 00M51-01 $3.00 

O. 1-1/8” Wing Knob (M), ea. 00M51-02 $3.00 

P. 1-1/2” Wing Knob (F), ea. 

Q. 1-1/2” Wing Knob (M), ea. 

R. 2” Wing Knob (F), ea. 00M52-01 $5.00 

S. 2” Wing Knob (M), ea. 00M52-02 $5.00 

T. 2” Bar Knob (F), ea. 00M55-10 $8.00 

U. 2” Bar Knob (M), ea. 00M55-11 $5.00 

V. 2” Four-Arm Knob (F), ea. 00M55-40 $5.00 

W. 2-1/4” Pentagon Knob (F), ea. 00M50-01 $3.00 

X. 1-1/2” Rose Knob, ea. 00M40-01 $2.00 

Y. Knurled Knobs (4)* 00M40-02 $2.50 

Z. 1-1/4” T-Knobs (4) 00M40-03 $2.50 

AA. Nylon Washers (10) 00M40-23 $2.50 

BB. Jig Handle 00N36-01 $7.00 

CC. Wing Nut, ea. 00M54-01 $3.50 

DD. 1/2” Thumbscrew, ea. 00N35-02 $9.00 

3/4” Thumbscrew, ea. 00N35-03 $8.80 

1” Thumbscrew, ea. 00N35-04 $9.00 

1-1/2” Thumbscrew, ea. 00N35-06 $9.50 


5/16”-18tpi 

00M77-01 $3.00 

00M75-05 $5.00 

00M73-01 $8.00 

00M73-02 $15.00 

00M76-20 $3.00 

00M76-21 $3.00 

00M76-10 $4.00 

00M76-11 $5.00 

00M75-20 $4.00 

00M75-21 $4.00 

00M75-30 $6.00 

00M75-31 $4.00 

00M71-01 $4.00 

00M71-02 $3.50 

00M72-01 $5.00 

00M72-02 $5.00 

00M75-10 $8.00 

00M75-11 $5.00 

00M75-40 $5.00 

00M70-01 $3.00 

00M60-01 $2.00 

00M60-02 $2.50 

00M60-03 $2.50 

00M60-23 $2.50 

00N56-01 $7.00 

00M74-01 $3.50 

00N55-02 $9.00 

00N55-03 $8.80 

00N55-04 $9.00 

00N55-06 $9.50 

T-NUTS & PROPELL NUTS 

Available with 3, 4 or 6 prongs, each with its own advantages. Generally, 3 prong are used for plywood, 4 

prong nuts are hard or soft wood, and 6 prong nuts for softer materials and composites. Sold in bags of 10. 

A. B. 

Description Order no. Price 

Order no. 

Price 

Order no. 

Price 

1/4”-20 Thread 

A. 3-prong T-Nuts (10) 00N22-03 $1.50 

B. 4-prong T-Nuts (10) 00N22-04 $1.50 

C. 6-prong T-Nuts (10) 00N22-06 $1.50 

D. Propell Nuts (10) 00N23-01 $2.40 

5/16”-18 Thread 

00N52-03 $2.00 

00N52-04 $2.00 

- 

00N32-01 $3.00 


00N22-23 $2.20 

00N22-24 $2.20 

00N22-26 $2.20 

00N23-02 $3.80 

C. D. 

HANGER BOLTS 1/4”-20 THREAD 


A. 1” Bolts (10) 01Z02-01 $1.50 

B. 1-1/2” Bolts (10) 01Z02-15 $1.60 

C. 2” Bolts (10) 01Z02-20 $1.70 

D. 2-1/2” Bolts (10) 01Z02-25 $1.80 

E. 1-1/2” Insert Bolts (10) 00M93-01 $9.00 

A. 

B. 

C. 

D. 

E. 

BRASS NUTS, BOLTS & INSERTS 




A. 1” RH Bolts (10) 44Z08-03 $6.00 

1” RH Bolts (25) 44Z08-01 $12.00 

B. 1” FH Bolts (10) 44Z08-04 $6.00 

1” FH Bolts (25) 44Z08-02 $12.00 

C. 2” RH Bolts (10) 44Z09-03 $11.00 

2” RH Bolts (25) 44Z09-01 $20.00 

D. 2” FH Bolts (10) 44Z09-04 $11.00 

2” FH Bolts (25) 44Z09-02 $20.00 

E. Knurled Screw ea. 00M91-01 $6.00 

F. Insert Nuts (10) 00M90-01 $14.00 

G. Speed Nuts (4) 05F01-03 $16.00 

H. 24” Rod ea. 05F01-04 $5.00 

5/16”-18 Thread 

44Z08-13 $10.00 

44Z08-11 $25.00 

44Z08-14 $10.00 

44Z08-12 $25.00 

44Z09-13 $17.00 

44Z09-11 $40.00 

44Z09-14 $17.00 

44Z09-12 $40.00 

00M95-01 $6.00 

00M94-01 $14.00 

12K79-81 $5.00 

H. 

A. B. C. D. 

E. 

F. 

G. 



A. 

B. 

BELT/DISC CLEANING STICKS 


BELT-CLEANER-M 32x32x200mm $7.00 

BELT-CLEANER-L 50x50x200mm $12.00 

1/4” & 5/16” 149 PIECE HARDWARE 

FITTING KITS 

Get all the components that you need in this 

master kit of jig and fixture fittings. Available 

in 1/4” and 5/16” thread configurations. 

Kits Includes: 20 x 1” T-Bolts, 10 x 2-1/2” 

T-Bolts, 20 x 1-1/2” T-Bolts, 10 x 3-1/2” 

T-Bolts, 16 x T-Nuts, 10 x 1” Round Insert 

Knobs, 6 x 2” T-Insert Knobs, 6 x Four Wing 

Bolt Knobs, 4 x Five Wing Bolt Knobs, 6 x 

Four Wing Insert Knobs, 4 x Five Wing Insert 

Knobs, 16 x Threaded Inserts, 20 x Washers. 


00H21-49 1/4” kit $69.00 

00H31-49 5/16” kit $69.00 

INCRA ® BUILD-IT SYSTEM 

STARTER KIT 

Your new Incra ® Build-It System Starter Kit 

provides all of the Build-It System components 

you’ll need to produce many different 

beneficial jigs! Kit includes all of the Build-It 

System Components you’ll need to produce 

all of the beneficial jigs and more. Just connect 

the parts! 

Order no. 

Price 

IN-BKITSTART $152.00 

SMALL & LARGE DELUXE HOLD 

DOWN CLAMPS Made from anodised aluminium. 

Designed to fit into a 1/4” or 5/16” 

t-track. Ideal for router tables or jigs. 


CYH-912 Small, holds 75x85mm, ea. $8.00 

CYH-283 Large, holds 90x70mm, ea. $10.00 

CAM CLAMP MECHANISM 

This cam clamp can exert as much as 400lb 

of force using only a thumb and forefinger 

to operate the handle. 


A. 05J51-01 1/4-20 $7.00 

B. 05J51-05 5/16”-18 $7.00 

FENCE CLAMP (Pair) 

These allow you to use auxiliary fences in 

conjunction with your existing fences without 

the clamps getting in the way. 

Order no. 

Price 

CYH-373 $20.00 

A. 

C. 

GOOD HAND TOGGLE CLAMPS 

Order no. 

Hold 

Cap. 

Length 

Clamp 

Cap. 

B. 

Price 

A. Horizontal Handled Toggle Clamps 

GH-200W 400kg 240mm 57mm $18.00 

GH-225D 227kg 173mm 37mm $15.00 

GH-201C 100kg 143mm 25mm $13.00 

GH-20400 20kg 66mm 10mm $13.00 

B. Push/Pull Toggle Clamp 

GH-302F 136kg 137mm 32mm $20.00 

C. Vertical Handled Toggle Clamps 

GH-101EL 360kg 145mm 50mm $20.00 

GH-11401 100kg 70mm 22mm $13.00 

GH-12050 91kg 65mm 25mm $13.00 

GH-101A 50kg 50mm 17mm $12.00 

SLEEVELESS 

DRUM SAND- 

ING SET 

Set includes 

1”x3”, 2-1/2” x 

3”, 2”x3”, 3”x3” 

drums. Also 

included are two 

1/2” and two 1/4” 

drive shafts. For use in drill press only. 

Order no. 

Price 

DRUM-SET-4 $69.00 

20 PIECE LONG SERIES SANDING 

SET Set includes: 1/2”, 3/4”, 1” and 1-1/2” 

diameter spindles. All spindles are 2-1/2” 

long. Two 80 and 120 grit sanding sleeves 

are included for each drum. 

Order no. Desc. Price 

DRUM-20L Sanding Set $25.00 

DRUM-20LS Rep. sleeves $11.00 

20 PIECE 

MID LENGTH 

SANDING 

SET (BOXED) 

Diameter: 1/2”, 

3/4”, 1”, 1-1/2” 

Length: 2”, 2”, 

2”, 2” 

Order no. 

Price 

DRUM-SET-20 $22.00 

PNEUMATIC 

DRUM SLEEVE 

SANDER 

110x150mm with 

5/8” x 11tpi LH female 

thread, suits 

left end of most 

modern 8” bench grinders. Includes sanding 

sleeve. 

Order no. 

Price 

A5-455 $69.00 

CLOTH BACKED 

SANDING KIT 

Kit contains 4 rolls of 

25mm x 6m with the 

following grits: 150, 

240, 320 and 400. 

Order no. 

Price 

SPS95-01 $22.00 

36 



REPLACEMENT BELTS 

Order no. Length(mm) Grit Price 

TO SUIT SB-609 & SBD-6012QC 

SB-1220-60 150 x 1220 60 $18.00 

SB-1220-80 150 x 1220 80 $18.00 

SB-1220-120 150 x 1220 120 $18.00 

SB-1220-180 150 x 1220 180 $18.00 

SB-1220-240 150 x 1220 240 $18.00 

SB-1220-320 150 x 1220 320 $18.00 

TO SUIT BB-80S 

SB-2260-60 150 x 2260 60 $26.00 

SB-2260-80 150 x 2260 80 $26.00 

SB-2260-120 150 x 2260 120 $26.00 

SB-2260-180 150 x 2260 180 $26.00 

SB-2260-240 150 x 2260 240 $26.00 

SB-2260-320 150 x 2260 320 $26.00 

TO SUIT BDS-48 

SB-915-60 100 x 915 60 $10.00 

SB-915-80 100 x 915 80 $10.00 

SB-915-120 100 x 915 120 $10.00 

SB-915-180 100 x 915 180 $10.00 

SB-915-240 100 x 915 240 $10.00 

SB-915-320 100 x 915 320 $10.00 

TO SUIT OBS-6108 

SB-2743-60 150 x 2743 60 $32.00 

SB-2743-80 150 x 2743 80 $32.00 

SB-2743-120 150 x 2743 120 $32.00 

SB-2743-180 150 x 2743 180 $32.00 

SB-2743-240 150 x 2743 240 $32.00 

SB-2743-320 150 x 2743 320 $32.00 

GRAPHIC SLIP CLOTH 

Graphite slip cloth is glued to the platen on 

sanding machines greatly reducing the friction 

between the back of the moving paper 

and the platen. This has the effect of greatly 

increasing the usable HP of the machine. 

Order no. Width Price 

GRAPHITE-100MM 100mm $19.00 

GRAPHITE-150MM 150mm $29.00 

REPLACEMENT VELCRO STYLE 

HOOK & LOOP DISCS 

Order no. Style Grit Price 

6” Hook & Loop Sanding Discs 

SD-6-60 Hook & Loop 60 $2.50 

SD-6-80 Hook & Loop 80 $2.50 

SD-6-120 Hook & Loop 120 $2.50 

SD-6-180 Hook & Loop 180 $2.50 

SD-6-240 Hook & Loop 240 $2.50 

SD-6-320 Hook & Loop 320 $2.50 

TO SUIT DE-31-340 

SD-8-60 Hook & Loop 60 $3.50 

SD-8-80 Hook & Loop 80 $3.50 

SD-8-120 Hook & Loop 120 $3.50 

SD-8-180 Hook & Loop 180 $3.50 

SD-8-240 Hook & Loop 240 $3.50 

SD-8-320 Hook & Loop 320 $3.50 

TO SUIT SB-609 

SD-9-60 Hook & Loop 60 $6.00 

SD-9-80 Hook & Loop 80 $6.00 

SD-9-120 Hook & Loop 120 $6.00 

SD-9-180 Hook & Loop 180 $6.00 

SD-9-240 Hook & Loop 240 $6.00 

SD-9-320 Hook & Loop 320 $6.00 

TO SUIT OBS-6108 

SD-12-60 Hook & Loop 60 $8.00 

SD-12-80 Hook & Loop 80 $8.00 

SD-12-120 Hook & Loop 120 $8.00 

SD-12-180 Hook & Loop 180 $8.00 

SD-12-240 Hook & Loop 240 $8.00 

SD-12-320 Hook & Loop 320 $8.00 

HOOK & LOOP VELCRO STYLE 

BACKING PAD WITH SELF ADHESIVE 

BACK (each kit includes 1x120 grit disc) 

Order no. Style Price 

SDS-6-KIT 6” H & L Starter Kit $12.00 





COLOUR CODED SANDPAPER 

DESIGNED FOR EASY IDENTIFICATION 

Order no. Length(mm) Grit Price 

SPR-RED-80 300mmx2m 80 $18.00 

SPR-WHITE-120 300mmx2m 120 $18.00 

SPR-YELLOW-180 300mmx2m 180 $18.00 

SPR-BLUE-240 300mmx2m 240 $18.00 

SPR-ORANGE-320 300mmx2m 320 $18.00 

SPR-GREEN-400 300mmx2m 400 $18.00 

CLOTH BACKED SANDPAPER 

Order no. Type Grit Price 

SP-4-80 4” Flex Cloth 80 $5.50 

SP-4-120 4” Flex Cloth 120 $5.50 

SP-4-180 4” Flex Cloth 180 $5.50 

SP-4-240 4” Flex Cloth 240 $5.50 

SP-4-320 4” Flex Cloth 320 $5.50 

SP-4-400 4” Flex Cloth 400 $5.50 

VELCRO SANDSHEET 

Order no. Size Grit Price 

SSV-80 115 x 230 80 $1.50 

SSV-120 115 x 230 120 $1.50 

SSV-180 115 x 230 180 $1.50 

SSV-240 115 x 230 240 $1.50 

SSV-320 115 x 230 320 $1.50 

SSV-400 115 x 230 400 $1.50 

WET & DRY PAPER 

Order no. Type Grit Price 

WD-600 W/proof Abrasive 600 $1.50 




ABRASIVE 

SANDING BLOCKS 

Approx. size 

80x45x20mm. These 

blocks are solid abrasive 

in a rubberised 

compound. The abrasive never wears out 

until the whole block is worn away. 

Order no. Grit Price 

RAB-060 60 grit $7.00 

RAB-120 120 grit $7.00 


Woodturning & Accessories 

CARBA-TEC ® ECONOMY MINI LATHE 

A small, well priced lathe with five spindle speeds. The headstock, 

bed and tailstock are constructed of cast iron and the 375W induction 

motor has more than enough power for the type of projects likely 

to be produced on a lathe of this size. Comes complete with drive 

centre, revolving tailstock centre, and 80mm diameter faceplate 


Motor 

1/2hp, 240v 

Swing over bed capacity 

260mm 

Max. distance between centres 

440mm 

Spindle thread 

M30x3.5 

Hole through tailstock 

10mm 

Spindle RPM 5 speed-500 to 3,200 

Morse taper 

MT2 


35/33kg 

Order no. 

Price 

MC1018 $279.00 

WOODFAST WM-305 MIDI LATHE 

Full, heavy cast iron construction provides heft and minimises vibration. 

The belt cover is easily removed for belt and pulley adjustments. 

A mechanical catch holds the cover in place. 


Motor 

1/2hp, 240v 


300mm 


420mm 


M30x3.5 


10mm 

Spindle RPM 6 speed-360 to 3,250 

Indexing positions 12 

Morse taper 

MT2 


52/48kg 


WM-305 Woodfast Midi Lathe $399.00 

WBE-25 Bed Extension $79.00 

WMLS-36 Floor Stand $119.00 

WSE-24 Stand Extension $79.00 

CARBA-TEC ® VARIABLE SPEED MINI LATHE 

Quick to lock control levers easily position tool-rest, stable cast-iron 

frame, head and tailstock to reduce chatter and vibration for smoother 

turning. 3 variable speed ranges; 250-800, 550-1700 & 1200-3600. 


Motor 

3/4hp, 240v, 550W 


355mm 

Bed length 

430mm 


M30x3.5 


10mm 

Spindle RPM Variable -250-3600 


Morse taper 

MT2 


46/42.5kg 

Order no. 

Price 

CT-70-1000 $799.00 

CARBA-TEC ® WOODLATHE 

Headstock locks in four positions for outboard turning, cast iron 

bed, hollow headstock with No.2 MT & M30 x 3.5 spindle, inc. stand, 

300mm tool rest, face plate, drive centre revolving centre and hollow 

tailstock with No. 2 MT. 


Motor 

3/4hp, 240v, 550W 


300mm 

Bed length 

900mm 


M30x3.5 


10mm 

Spindle RPM Variable -500-2000 

Morse taper 

MT2 

Headstock movement Swivels 360° 


1620x400x1120mm 


85/80kg 


MC900 Carba-Tec ® Woodlathe $469.00 

MCLEG Cast Iron Legs $149.00 

MCREST 3-Point Steady Rest $49.00 

38 For more information & to shop online go to www.carbatec.com.au


CARBA-TEC ® WOODLATHE 

Headstock rotates 360° and locks in four positions for outboard 

turning. Cast iron bed, hollow headstock with No.2 MT & M30 x 3.5 

spindle. This great new lathe includes cast iron stand with tool tray, 

300mm tool rest with 2 piece articulated banjo, face plate, drive 

centre, revolving centre and hollow tailstock with No. 2 MT. Variable 

speeds between 500 - 2000 rpm. 


Motor 

1-1/2hp, 240v 


410mm 

Bed length 

1130mm 


M30x3.5 


15mm 

Spindle RPM Variable - 500 to 2000 

Morse taper 

MT2 

Headstock movement Swivels 360° 


2000x450x1200mm 


150/140kg 

Order no. 

Price 

MC1100A $749.00 

CARBA-TEC ® VARIABLE SPEED LATHE 

Heavy duty, cast-iron bed for added stability and minimal vibration. 

Electronic variable speed drive, select from seven speeds ranging 

between 50 to 3790 rpm. Four inch tailstock travel. 14” tool rest and 

a 6” face plate included. 


Motor 

1-1/2hp, 240v 


406mm 

Bed length 

1100mm 


M30x3.5 


9.5mm 

Spindle RPM Variable - 50 to 3790 


Morse taper 

MT2 

Headstock movement 

Swivels 360° and slides 


1800x600x1400mm 


185/160kg 

Order no. 

Price 

CT-25650 $2,395.00 

NOVA DVR XP LATHE 

Is the worlds only intelligent lathe, combining the best features of 

stationary lathes - power, capacity and capability - with state of the 

art technology to make your turning more efficient, fun and safer. 

Key Features: Incredibly Versatile, Intelligent control with Adaptive 

Control TM Software, Faster, more efficient turning, stationary lathe capabilities 

in a compact workspace and energy efficient. Unit includes 

M30 x 3.5 spindle thread adaptor. Colour may vary from that shown. 


Motor 

2hp, 230v, 10AMP 


400mm 


600mm 


1-1/4” x 8TPI 


15mm 

Spindle RPM 178 to 3000 


Morse taper 

MT2 

Headstock movement 360° 


88/82kg 

Order no. 

Price 

TK-DVR-XP $2,495.00 

NOVA 1624-44 LATHE 

A great lifetime lathe - packed with features that you’d expect from a 

much more expensive lathe. The most versatile lathe on the market 

which allows you to complete more wood turning projects than any 

other lathe in its class. Key Features: Incredibly Versatile, 50% more 

power, greater capacity, great speed range, full 360° swivel head and 

extendable beds. Unit includes M30 x 3.5 spindle thread adaptor. 

Colour may vary from that shown. 


Motor 

1-1/2hp 


400mm 


600mm 


1-1/4” x 8TPI 


15mm 

Spindle RPM 178 to 3000 


Morse taper 

MT2 

Headstock movement Full 360° 


120/114kg 

Order no. 

Price 

TK-1624-44 $1,395.00 

Want to see more? See our website for our full range of products. 

39


BED EXTENSION 

Trapezoidal design, 

computer designed 

for maximum 

strength, heavyduty 

cast iron, easy 

fit to Nova lathes, 

each unit gives 510mm between centre capacity. 

13kg. 

Order no. 

Price 

TK-BEDEXTN $229.00 

CAST IRON 

STAND 

CAD designed for 

exceptional structural 

strength. Compact 

footprint takes 

up less space, but 

achieves maximum 

strength and rigidity. 

Heavy-duty cast iron 

construction. 

Order no. 

Price 

TK-STAND-CAST $499.00 

BOWL TOOLREST 

25.4mm shank for super 

strong platform, solid 

cast iron for maximum 

strength, special curved 

design makes bowl turning 

easier. Ideal for use 

with outrigger accessory. 

Order no. 

Price 

TK-REST-BOWL $49.00 

CENTRE SYSTEM 

Unique combination system provides comprehensive 

tailstock support for all woodturning 

requirements. Over 6 functions in 

one handy unit. Includes quick change 2MT 

tapers. 

Order no. 

Price 

TK-CENTRE $79.00 

SWING AWAY 

MOUNT 

Space saving - attach 

an extra lathe 

bed extension (not 

included) for longer 

projects, swing the 

bed out of the way and save space when you 

don’t need the extra capacity. 

Order no. 

Price 

TK-SWINGAWAY $159.00 

OUTRIGGER 

Articulated design, 

very quick and easy 

to move into position, 

heavy-duty cast 

iron, Quick lock cam 

action, fast, positive 

locking action. 

Order no. 

Price 

TK-OUTRIGGER $289.00 

TOOLRESTS 

25.4mm shank for super 

strong platform, cast iron 

with ribbing to maximise rigidity. 

Small size makes it 

perfect for smaller projects. 

Order no. 

Price 

TK-REST-100MM $39.00 

SPANNER 

Fits all NOVA chucks. Designed 

to unscrew the chuck 

from the lathe. Can be used as 

the body grip handle for original 

NOVA chuck, SuperNova 

and SuperNova2 chucks. 

Order no. 

Price 

TK-SPANNER $17.00 

LATHE HANDWHEEL 

The handwheel unit is used 

on the outboard end of the 

headstock spindle. It can 

be used to position work by 

hand or to slow down the 

spindle by hand. 

Order no. 

Price 

TK-HANDWHEEL $35.00 

TOOLREST COLLAR 

A simple collar to provide 

fixed height for 

the toolrest, saving the 

turner from having to 

find the same height 

again each time. 

Order no. 

Price 

TK-COLLAR $14.00 

90MM TEKNATOOL NOVA G3 KEY 

OPERATED CHUCK 

Ideal for those with mid-size lathes. Good 

all-round chuck for the beginner or intermediate 

user or as a second chuck for the 

advanced turner. Takes all accessory jaws. 

Keyed chucks offer an the advantage of one 

handed operation. 

Features Include: 

• Fully backwards compatible with Super 

Nova and Nova Chuck Jaw sets and 

inserts. 

• Jacobs style chuck key with large, easy 

grip handle. 

• Fitted with 50mm Jaws as standard. 

• Expanding Mode- holds work from 53- 

72mm 

• Contracting Mode- holds work from 42- 

63mm 

When ordering your chuck please specify the 

required insert reducer to match your lathe 

spindle thread. Price Includes Insert. 

Order no. 

Price 

TK-G3 $169.00 

100MM TEKNATOOL SUPERNOVA 2 

KEY OPERATED CHUCK 

Ideal for those with lathes up to 508mm 

swing. Brilliant all-round chuck for the majority 

of users, from beginner to advanced. 

Takes all accessory jaws. Keyed chucks offer 

the advantage of one handed operation. 

Features Include: 

• Fully sealed composite backing plate. 

• Fully backwards compatible with Super 

Nova and Nova Chuck Jaw sets and 

inserts. 

• Fitted with 50mm Jaws as standard. 

• Expanding Mode-holds work from 53- 

72mm 

• Contracting Mode- holds work from 42- 

63mm 

When ordering your chuck please specify the 

required insert reducer to match you lathe 

spindle thread. Price Includes Insert. 

Order no. 

Price 

TK-SN2 $199.00 


Features standard on all NOVA Jaws: 

Full Cross Function: 

Only NOVA Chucks give you the same jaw fixing 

system and same insert/adaptor system 

across all chuck models. 

This means all accessory jaws in the range 

fit all the chucks in the range, including older 

chuck models*, giving you the ultimate flexibility. 

In buying a NOVA chuck, you can be 

confident that whether you want to move up 

or down the range, any accessories you have 

invested in will Fit. 

TK-6025 

TK-6026 

NEW NOVA MINI JAWS PACKAGE 

NOVA Mini jaws set is designed to enrich 

NOVA jaw offering in mini turning area. This 

package consists of 4 types of jaws: NOVA 

20mm jaw, NOVA Mini Spigot jaw, NOVA 

Mini Step Jaw and NOVA 70mm jaw, . 

They are ideal to use on NOVA 

Midi chuck for midi/mini work. 

TK-JS70N 

TK-JS20N 

BENEFITS & FEATURES 

• A great range of smaller projects can 

be mounted and turned using either the 

expansion mode (mostly for bowls) or 

the contraction mode (mostly for 

spigots) 

• Made from medium tensile carbon 

K1045 steel to provide maximum 

structural strength. 

• Standard Woodworm Screw can be 

used with these jaws 

• Able to be used on all Teknatool Chucks 

in the range. 


TK-6025 Mini Step Jaws $57.00 

TK-JS70N 70mm Bowl Jaw $57.00 

TK-6026 Mini Spigot $65.00 

TK-JS20N 20mm Jaw $45.00 

75MM BOWL JAWS 

The dovetail walls are 

3 x the thickness of 

conventional jaw types 

for rugged work holding 

for larger/heavier 

bowl work. Deep smooth 

walled dovetails holds wood gently but 

very firmly. 

Order no. 

Price 

TK-6014 $71.00 

STEP JAW SET 

Designed primarily to 

grip in the contracting 

mode, the base 

(foot) of footed bowls. 

Provides optimum 

gripping for three base 

sizes with minimal crush damaged wood. 

Order no. 

Price 

TK-JS75DT $65.00 

100MM JAW SET 

The 100mm jaw sets 

are designed for an 

expanded dovetail grip 

(up to 14” dia. bowls), 

reverse dovetail grip for 

gripping footed bowls, 

limited spigot facility (up to 6” long) and 

provision to mount false wooden jaws. 

Order no. 

Price 

TK-JS100N $63.00 

COLE JAW SET 

This versatile set designed 

primarily for the re-chucking 

of bowls to remove 

the chuck marks or to 

re-shape the bottoms of 

bowls that have already been 

turned. Bowls up to 254mm in 

dia. can be accommodated. 

Order no. 

Price 

TK-JSCOLE $85.00 

COLE JAW SET 

Designed for re-chucking 

of bowls to remove chuck 

marks or to re-shape the 

bottoms of bowls that 

have already been turned. 

Other Nova jaw sets can 

be fitted to the Cole Jaws 

making a combination jaw 

facility. Mini Cole jaws are suitable for lathes 

with a minimum 203mm swing diameter. 

Order no. 

Price 

TK-6006 $85.00 

25MM JAW SET 

Designed for small bowl 

(expanding dovetail 

mounting up to 6” dia) 

and small spigot (contracting 

mode) free end 

turning work (up to 5” long). 

Order no. 

Price 

TK-JS25N $45.00 


FACEPLATE RINGS 

The Nova faceplate rings 

are designed for use with 

the Nova and SuperNova 

accessories, when you want 

to ensure an extra solid 

work holding method. 


TK-6000 75mm dia. $35.00 

TK-6001 125mm dia. $45.00 

TK-6002 158mm dia. $49.00 

35MM BOWL JAWS 

The 35mm bowl jaws fit 

perfectly into the current jaw 

range, picking up a small 

gap left between the 25mm 

and the 50mm jaws. These 

jaws are perfect for small to 

medium sizes with maximum grip, provided 

by the dovetail. 

Order no. 

Price 

TK-6019 $45.00 

75MM LONG NOSED 

JAWS 

A 50mm 2” rise above 

their mounting base 

means very long reach 

deep inside of bowls. Tremendous 

holding power externally and internally. 

Order no. 

Price 

TK-6017 $79.00 

SPIGOT JAWS 

Available in two different 

internal sizes, 35mm and 

45mm. Designed to grip 

both in the contracting 

(gripping round or square 

spigots) and in the expanding 

mode with up to 10” long work pieces. Their 

serrated tooth form makes for a very powerful 

grip that just won’t let go. 


TK-SP35 35mm dia. $55.00 

TK-SP45 45mm dia. $57.00 

130MM JUMBO JAW SET 

Designed to handle very large 

work up to 740mm (29”) in 

diameter. With these jaws 

you don’t run out of capacity 

using the Nova Chuck. 

Order no. 

Price 

TK-JS130N $69.00 

50MM JAW SET 

These jaws are standard with 

all Teknatool chuck standard 

versions (excluding Nova 

Titan, which has the Powergrip 

Jaw as standard). 

Order no. 

Price 

TK-JS50N $52.00 

25MM PIN JAW SET 

These extended jaws are designed 

to act like a pin chuck 

- expanding into a pre-bored 

hole. This is a useful technique 

for free form edge bowls. 

Order no. 

Price 

TK-JSPIN $65.00 


41


75mm faceplate 

PREMIUM DRIVE CENTRE (9.5MM) 

4 Prong 9.5mm (3/8”) diameter drive centre 

available in 2MT. Made in UK. 177g. 

PREMIUM DRIVE CENTRE (16MM) 

4 Prong 16mm (5/8”) diameter drive centre 

available in 2MT. Made in UK. 


AXM-340109 (9.5mm) $29.00 

AXM-340111 (16mm) $29.00 


4 Prong 25mm(1”) diameter drive centre 



4 Prong 38mm (1-1/2”) diameter drive centre 



AXM-340106 (25mm) $35.00 

AXM-340177 (38mm) $49.00 

PREMIUM HOLLOW DEAD CENTRE 

(8MM) 

This very versatile centre, bored 5/16” diameter 

right through, can be used in three 

ways: with the point extended for close access 

around small items, with the point just 

protruding for making a ring impression and 

without the tip when long hole boring. Made 

in UK. 157g. 

Order no. 

Price 

AXM-340164 $42.00 

PREMIUM 90° LIVE CENTRE (22MM) 

Our miniature live revolving centre has a 

22mm diameter head and twin bearings. Tool 

access is important when turning small items 

and, the 90° nose has far less tendency to 

act as a wedge when small or open grained 

timbers are used. Made in UK. 215g. 

Order no. 

Price 

AXM-340188 $49.00 

PREMIUM UNIVERSAL MULTI-HEAD 

LIVE CENTRE KIT 

We think that this is the best universal live 

centre available today. There are two sealed 

bearings in the body and the working end 

has a taper for mounting the various interchangeable 

tips, guaranteeing that they run 

perfectly concentric. The centre is supplied 

with three tips, a standard 60° cone for general 

work, a 9.5mm (3/8”) diameter by 16mm 

(5/8”) long point for small or close work and 

a cup or ring centre for open grain or split 

turning. Made in UK. 660g. 

Order no. 

Price 

AXM-340185 1MT $89.00 

AXM-340186 2MT $89.00 

PREMIUM HOLLOW ROTATING DRIVE 

CENTRE (8MM) 

One of the stars of the CARBA-TEC ® woodturning 

accessory range, this hollow rotating 

centre with its anti-split locating ring, choice 

of removable short or long points, twin ball 

bearings and 8mm (5/16”) diameter through 

hole. The short point protrudes a mere 3mm 

beyond the ring and allows an accurate impression 

of the ring to be made on the end of 

the timber. Made in UK. 247g. 

Order no. 

Price 

AXM-340166 $72.00 

PREMIUM LIVE CONE CENTRE 

When using small section brittle timber, splitting 

may be reduced by using a ring centre. 

Made in UK. 312g. 

Order no. 

Price 

AXM-340139 $69.00 

PREMIUM 60° LIVE CENTRE 

This 60° live revolving centre is made from 

top quality materials, incorporates two 

‘sealed for life’ dust proofed bearings and 

will cover 90% of all turning applications. 


Order no. 

Price 

AXM-340203 $55.00 


CARBA-TEC ® STEEL FACEPLATES 

One of the things that we get asked for all the 

time are quality faceplates. We have finally 

found some that fit the bill. They suit our most 

popular thread sizes of 1-1/4” x 8tpi and the 

Australian standard M30 x 3.5. Three diameters 

are available: 75, 100 and 150mm. 

ECONOMY LIVE CENTRES 

DRILL CHUCKS WITH NO. 1 OR 2 



CFP-75-114 75mm $12.00 

CFP-75-M30 75mm $12.00 

CFP-100-114 100mm $15.00 

CFP-100-M30 100mm $15.00 

CFP-150-114 150mm $32.00 

CFP-150-M30 150mm $32.00 


MCL-222 

4-prong Drive 

Centre, No.2 MT 

$10.00 

MCL-221 

4-prong Drive 

Centre, No.1 MT 

$10.00 

MCL-202 

Ball-Bearing Live 

Centre No.2 MT 

$15.00 

MCL-201 

Ball-Bearing Live 

Centre No.1 MT 

$15.00 


HM-3 10mm, No.2 Taper $29.00 

HM-4 13mm, No.1 Taper $29.00 

HM-5 10mm, No.1 Taper $29.00 

HM-6 13mm, No.2 Taper $29.00 

STEB STYLE CENTRE 

Multi-spur drive centre with 

spring loaded centre pin. Ideal 

for brittle materials where minimum 

pressure would be advantageous. No. 

2 MT. 

Order no. 

Price 

DC-0200 $35.00 



GROZ ENGINEERING QUALITY EXTRA 

HEAVY DUTY LIVE CENTRE 

Features replaceable and adjustable needle 

roller bearings that take up the radial 

load and heavy duty thrust bearings for axial 

loads. Centre points are ground to 60°. 


GZ-11011 No.2MT $62.00 

KEYLESS CHUCK WITH NO. 2 MORSE 

TAPER 

13mm capacity chuck with no. 2 morse 

taper shank and B-16 connection to chuck. 

Order no. 

Price 

HM-513 $39.00 

MORSE TAPER REDUCER 

Enables you to use No. 1 Morse 

Taper chucks, live centres, 

etc. in lathes fitted 

with No. 2 Morse 

Taper spindles. 

Order no. 

Price 

16002 $19.00 

WOODTURNER’S 

JACKET 

Available in M, L, 

XL and XXL. Please 

specify size when 

ordering. See website 

for all product 

sizes and codes. 

Order no. 

Price 

JACKET-XL $59.00 

VERITAS ® CENTRE FINDER 

Made from aluminium a knife edge steel 

blade is used to score the end of a workpiece. 

You set a square or cylinder (up to 

6” across) in the marker, tap it with a mallet, 

turn the wood 90° and tap it again. The 

result is two score lines that mark the centre 

of the wood; in softwoods the lines are deep 

enough to hold the drive centre directly. 

Order no. 

Price 

05N15-01 $33.00 

SKILTON 

SANDER 

This sander has a 

handle made from hard 

plastic making it light, 

durable and affordable. 

Attached to this 

are foam backed sanding 

pads mounted on ball bearings. These 

spin freely with just enough ‘give’ to conform 

to the inside of bowls. Supplied standard 

with a 75mm head, 50mm head available 

as an accessory. Heads are velcro backed. 

Abrasives available. 


SK-75 Sander Complete $49.90 

SK-SS50 50mm pad $23.00 

SK-SS75 75mm pad $27.00 

SANDPAPER 

TO SUIT SK 

SANDER & 

SANDING 

PADS VE-50 & 

VE-75 


SK-5060 50mm #60grit 25pce $9.00 

SK-5080 50mm #80grit 25pce $9.00 

SK-50120 50mm #120grit 25pce $9.00 

SK-50180 50mm #180grit 25pce $9.00 

SK-50240 50mm #240grit 25pce $9.00 

SK-50320 50mm #320grit 25pce $9.00 

SK-50500 50mm #500grit 25pce $9.00 

SK-7560 75mm #60grit 25pce $17.00 

SK-7580 75mm #80grit 25pce $17.00 

SK-75120 75mm #120grit 25pce $17.00 

SK-75180 75mm #180grit 25pce $17.00 

SK-75240 75mm #240grit 25pce $17.00 

SK-75320 75mm #320grit 25pce $17.00 

SK-75500 75mm #500grit 25pce $17.00 

SOFT, 

FLEXIBLE 

SANDING PADS 

For use on power 

drills. Ideal for 

sanding inside 

bowls, etc. 


VE-30 30mm $16.00 

VE-50 50mm $22.00 

VE-75 75mm $26.00 

VE-100 100mm $44.00 

HOOK & LOOP RECTANGULAR 

SHEETS To suit sanding pads above. 


SSV-80 80 grit $1.50 

SSV-120 120 grit $1.50 

SSV-180 180 grit $1.50 

SSV-240 240 grit $1.50 

SSV-320 320 grit $1.50 

SSV-400 400 grit $1.50 

WOODCUT ® BOWLSAVER 

Making three bowls from one block of 

wood is a breeze. Cut perfectly shaped 

bowls ranging from 75mm to 330mm 

in diameter, and up to 125mm deep. 

For added stability, unit also plugs into 

the MT2 socket in your lathe tailstock. 

Note: A tool post will be required to 

use your bowlsaver (not included). 

Order no. 

Price 

WDC-BSVRH $419.00 

WOODCUT TRU-GRIND 

Incorporates a number of new features that 

make it more useful than ever, especially for 

the difficult task of sharpening turning gouges 

and scrapers. Instructional CD supplied 

together with full instruction booklet. Tool capacity 

1-1/2”. 

Order no. 

Price 

WDC-TRUGR $189.00 

STURDYREST ® 

Is an optional toolrest accessory for the Tru- 

Grind Jig above. Note - Sturdy rest does not 

include the sliding base unit as this is part of 

the TruGrind above. 

Order no. 

Price 

WDC-PVS-L $65.00 

TRI-GAUGE 

Maintaining the correct grind angle for your 

woodturning tools is absolutely essential. 

This simple gauge will enable you to check 

that your grind angle is correct, every time. 

Order no. 

Price 

WDC-TRIG $21.00 


43


ECONOMY HSS 

TURNING 

CHISEL SETS 

Made in China 

these tools 

compare very 

favourably with 

European and 

Australian manufactured products but at half the price. 3 piece set 

contains: 10mm spindle gouge, 12mm skew chisel and 2mm parting 

tool. 500g. 6 piece set contains: 10mm spindle gouge, 13mm bowl 

gouge, 22mm roughing gouge, 18mm round nose scraper, 20mm 

diamond parting tool, and 25mm oval skew. 


TJ-3 3 Piece Miniature Set, Length 270mm $29.00 

TJ-6 6 Piece Set $129.00 

CLOTH BACKED SANDING KIT 

An ideal accessory for woodturning 

spindle work, pen making and other 

applications where narrow sanding 

strips are an advantage. This kit contains 

4 rolls of 25mm x 6 metre with the 

following grits: 150, 240, 320 and 400. 

Individual rolls not available, only sold 

in kit form. 450g. 

Order no. 

Price 

SPS95-01 $22.00 

BRASS FERRULES (PAIR) 

For chisel handles. Guaranteed never to split! 

Chamfered on the outside at one end for 

hand comfort and on the inside at the other 

end for ease of installation. Inside Dia: 22mm, 

Outside Dia: 25mm, Length: 17mm. 

Order no. 

Price 

F111B $6.00 

B. 

HAMLET CRAFT TOOLS 

Traditionally Sheffield is a world renowned centre for the manufacturing 

of quality tools and no other company exemplifies this tradition 

more than 

A. 

C. 

D. 

E. 

F. G. 

Order no. Size Handle Length Weight Price 

A. ROUGHING GOUGES 

M2-063 1/2” 13” 325g $62.00 

M2-064 3/4” 10” 380g $62.00 

M2-065 1-1/4” 14” 650g $80.00 

M2-066 1-3/4” 16” 890g $133.00 

B. STANDARD ROUND SPINDLE GOUGES 

M2-067 1/4” 10” 200g $35.00 

M2-068 3/8” 10” 245g $41.00 

M2-069 1/2” 10” 315g $48.00 

M2-070 3/4” 10” 285g $62.00 

C. BOWL GOUGES 

M2-082 1/4” 14” 450g $52.00 

M2-083 3/8” 14” 510g $62.00 

M2-084 1/2” 14” 665g $76.00 

M2-086 3/4” 16” 950g $142.00 

M2-087 1” 16” 1132g $164.00 

D. SHORT BOWL GOUGES 

M2-088 3/8” 10” 428g $56.00 

M2-088A 1/4” 14” 450g $52.00 

“HUT” WOODTURNER’S WAX 

With Money Back Guarantee. If this is not the best and easiest finish 

you’ve ever tried, return it at the end of seven days for a full refund 

of the purchase price. Gives a hard, full bodied finish to your work 

without lines or blotches. 120g. 

“HUT” PROFESSIONAL PEN POLISH WAXES 

For a long wearing semi-gloss finish. 


HUT-L Woodturner’s Wax - Light $16.00 

HUT-107 Professional Pen Polish Waxes - Brown $9.00 

HUT-108 Professional Pen Polish Waxes - White $9.00 

Order no. Description Size 

Handle 

Length 

Weight Price 

E. HEAVY DUTY SCRAPERS 

M2-144F (RH) 1-1/2”x3/8” 14” 825g $112.00 

M2-144E (LH) 1-1/2”x3/8” 14” 825g $112.00 

REGULAR DUTY SCRAPERS 

M2-112 (Square end) 1/2” 10” 290g $39.00 

M2-113 (Square end) 3/4” 10” 335g $47.00 

F. M2-114 (Square end) 1” 10” 385g $57.00 

M2-116 (Round nose) 1/2” 10” 290g $39.00 

M2-117 (Round nose) 3/4” 10” 335g $47.00 

G. M2-118 (Round nose) 1” 10” 395g $60.00 

M2-119 (Round nose) 1-1/4” 14” 640g $79.00 

CENTRE FIND 

Find the centre of round or square 

stock quickly and easily. Saves you 

time. 

Order no. 

Price 

CENTRE-FIND $4.00 

NOVA 10 IN 1 CHUCK GAUGE 

Combines all the most commonly used 

gauges into ONE efficient device. Only 

gauge available for NOVA chuck jaw 

dovetail measurement. Made of heavy 

duty polycarbonate. 

Order no. 

Price 

TK-10051 $15.00 



C. 

A. 

B. 

D. 


A. GERMAN SPINDLE GOUGES 

M2-072 1/4” 10” 235g $62.00 

M2-073 3/8” 10” 235g $62.00 

M2-074 1/2” 10” 290g $66.00 

M2-075 3/4” 10” 322g $79.00 

M2-076 1” 10” 420g $111.00 

M2-077 1-1/4” 10” 630g $125.00 

B. BEAD FORMING TOOLS 

M2-127 1/4” 10” 255g $41.00 

M2-128 3/8” 10” 280g $41.00 

M2-129 1/2” 10” 315g $47.00 

C. LONG & STRONG DETAIL GOUGES 

M2-156 3/8” 14” 430g $73.00 

M2-157 1/2” 14” 630g $83.00 

D. DETAIL GOUGES 

M2-153 3/8” 10” 250g $47.00 

M2-154 1/2” 10” 335g $54.00 

E. CAPTIVE RING TOOLS 

M2-130 1/4” 10” 270g $48.00 

M2-131 3/8” 10” 295g $52.00 

M2-132 1/2” 10” 322g $55.00 

F. CONTINENTAL SPINDLE GOUGES 

M2-079 1/2” 10” 230g $62.00 

M2-080 3/4” 10” 285g $73.00 

G. RING TOOLS 

M2-125 1/2” 10” 285g $59.00 

M2-126 1” 14” 600g $83.00 

E. 

F. 

G. 

M2-090 

M2-089 

M2-091 

M2-092 

M2-095 

M2-094 


PARTING TOOLS 

M2-089 (Thin) 1/16” 4” 120g $38.00 

M2-090 1/8” 10” 220g $46.00 

M2-091 3/16” 10” 305g $46.00 

M2-092 (Diamond) 1/4” 10” 285g $60.00 

BEADING & PARTING TOOLS 

M2-094 1/4” 10” 235g $46.00 

M2-095 3/8” 10” 310g $49.00 

OVAL SKEWS 

M2-096 1/2” 10” 235g $49.00 

M2-097 3/4” 10” 335g $52.00 

M2-098 1” 10” 380g $60.00 

M2-099 1-1/4” 14” 555g $88.00 

STANDARD SKEWS 

M2-100 1/2” 10” 280g $39.00 

M2-101 3/4” 10” 335g $52.00 

M2-102 1” 10” 400g $65.00 

M2-103 1-1/4” 14” 625g $87.00 

ROUND SKEWS 

M2-108 3/8” 10” 280g $40.00 

M2-109 1/2” 10” 375g $46.00 

ROLLED EDGE SKEW 

M2-104 1/2” 10” 275g $42.00 

M2-105 3/4” 10” 305g $55.00 

M2-106 1” 10” 390g $69.00 

M2-107 1-1/4” 10” 650g $93.00 

A. 

B. 

M2-164 Not avail. 

M2-217 M2-215 M2-134 

M2-135 


HOOK TOOLS 

M2-163 1/4” 10” 630g $76.00 

M2-164 1/2” 10” 660g $76.00 

SORENSEN SPINDLE MAKERS 

M2-215 1/4” 10” 235g $62.00 

M2-216 3/4” 10” 310g $67.00 

M2-217 1” 10” 400g $81.00 

SQUARE SECTION HOLLOWING TOOLS 

M2-133 1/4” 10” 210g $41.00 

M2-134 1/4” 10” 210g $52.00 

M2-135 1/4” 10” 210g $52.00 

A. 5 PIECE WOODTURNING TOOL SET 

Set contains: 3/4” roughing gauge, 1/4” spindle gouge, 1/2” skew, 

1/4” parting tool and 1/2” round nose scraper. Ideal for beginners or 

experienced turners. 

B. 5 PIECE MINIATURE WOODTURNING SET 

Set contains: 1/8”and 1/4” spindle gouge, 1/4” skew chisel, 1/4” 

round nose scraper and 1/16” parting tool. 420g. 


A. HCT-166 5 Piece Woodturning Tool Set $229.00 

B. HCT-168 5 Piece Miniature Woodturning Set $129.00 


45

Dust Extraction & Accessories 

CARBA-TEC ® ROOM 

AIR FILTER 

Remote control, 3 speed room filter. 450, 550 

& 650 CFM, 1/6hp, 240v. Filters the volume 

of a 3250 cuft room 12 times per hour. Unit 

is fitted with a timer so that the filter can run 

after personnel have left the workshop for 

the day. Standard filter is electrostatically 

charged to facilitate greater attraction of 

dust particles. Filter can be washed or blown 

out with air. Unit filters almost 100% of particles 

5 microns or larger and around 85% of 

particles up to 1 micron. Normally installed 

hung from the ceiling but can be placed on 

a bench. 24kg. 


CTF-1000 Room Air Filter $399.00 

CTF-1000-CF Filter to suit $69.00 

CARBA-TEC ® ROOM 

AIR FILTER 

Remote control, 3 speed room filter. 800, 

1200 & 1700 CFM, 1/3hp, 240v. Filters the 

volume of a 3250 cuft room 30 times per 

hour. Unit is fitted with a timer so that the filter 

can run after personnel have left the workshop 

for the day. Unit has a three filter system 

including an electrostatically charged 

filter to facilitate greater attraction of dust 

particles. Unit filters almost 100% of particles 

5 microns or larger and around 85% of 

particles up to 1 micron. (Note: This unit is 

fitted with a diffuser on the exhaust side for 

a more even spread of cleaned air.) Normally 

installed hung from the ceiling but can be 

placed on a bench. 55kg. 


CTF-2000 Room Air Filter $769.00 

CTF-2000-CF Filter to suit $99.00 

1HP ECONOMY DUST 

EXTRACTOR 

An excellent value for money machine. Suited 

for the hobbyist or weekend woodworkers’ 

workshop. Effective for removal of chips 

and shavings from one machine at a time. 

Unit fitted to castor base for easy storage in 

the small workshop. 


Motor 

1hp, 240v 

CFM Rating 

500cfm 

Filter Bag Fitted Needle Felt, 5 micron 

Collection Bag Type Plastic 

Hose Inlet Diameter 100mm 

Drum Diameter 375mm 

Number of Inlets 1 



Order no. 

Price 

FM-230 $199.00 

1HP UNDER BENCH ECONOMY 

DUST EXTRACTOR 


Motor 

1hp, 240v 

CFM Rating 

500cfm 

Filter Bag Fitted Cotton 

Filtration Bag 

30 micron 

Collection Bag Type Cloth 





Order no. 

Price 

FM-230M $199.00 

2HP ECONOMY DUST 

EXTRACTOR 

The ideal choice for the larger garage or 

shed workshop. The additional power in this 

machine means that you can have up to 2 

machines connected at the same time. Perfect 

for planers and jointers as the volume of 

airflow and bag capacity are greater. 


Motor 

2hp, 240v 

CFM Rating 

1,200cfm 









FM-300 Extractor $299.00 

FM-300-FB-5 Filter Bag $39.00 

PLASTIC COLLECTION BAGS 

It is necessary to use plastic bottom collection 

bags to replace the cloth bags on 

the bottom of your dust extractor when 

fitting pleated filter cartridges. Note - CT- 

2042-PCB bags also suit CT-4043 and 

SDC-4045A dust extractors. Avg. 1.45kg. 

All come as a 10 pack. 

Order no. 

Price 

FM-230-PCB $14.00 

FM-300-PCB $24.00 

CT-2042-PCB $25.00 

CT-002V-PCB $24.00 

CT-003V-PCB $36.00 

CT-005V-PCB $39.00 



2HP CARBA-TEC ® DUST 

EXTRACTOR 

A specially designed motor housing and impeller 

give this machine maximum performance. 

A high CFM rating for a 2hp machine 

means that you get the most for your money. 


Motor 

2hp, 240v 

CFM Rating 

1,600cfm 








Order no. 

Price 

CT-2042-1PH $599.00 

CT-2042-3PH $599.00 

PLEATED FILTER CARTRIDGES 

An excellent upgrade to your existing dust 

extractor. 


FM-230CF To suit FM-230 $169.00 

FM-300CF To suit FM-300 $189.00 

SCF-5060 To suit CT-2042 & CT-003VB $287.00 

PFC-1000 To suit CT-2042 & CT-003VB $695.00 

INDUSTRIAL TWIN BAG 

2HP DUST COLLECTOR 

Sealed bearings for quiet, longer 

lasting operation. Maximum CFM 

rate is 1,927cfm. 3 x 4” dust ports. Motor and 

hose connection point can be inverted to allow 

hoses to be connected from the top if 

required. Polyethylene bottom bags included 

as standard. 


Motor 

2hp, 240v 

CFM Rating 

1,927cfm 

Filter Bag Fitted Needlefelt, 5 micron 







Order no. 

Price 

CT-002VB-1PH $949.00 

INDUSTRIAL TWIN BAG 3HP 

DUST COLLECTOR 

Sealed bearings for quiet, longer lasting 

operation. Maximum CFM rate is 2,170cfm. 

Motor and hose connection point can be inverted 

to allow hoses to be connected from 

the bottom if required. Polyethylene bottom 

bags included as standard. 4 x 4” dust ports. 


Motor 

3hp, 240v/415v 

CFM Rating 

2,170cfm 

Filter Bag Fitted Needlefelt, 5 micron 






Order no. 

Price 

CT-003VB-1PH $1,195.00 

CT-003VB-3PH $1,195.00 

INDUSTRIAL 

5HP, 3PH DUST 

COLLECTOR 

Sealed bearings for quiet, longer 

lasting operation. Machine is fitted 

with 12 x 5 micron needlefelt top 

filter bags to achieve the maximum filter surface 

area, (around 12m 2 ). 4 x 5” dust ports. 


Motor 

5hp, 3 phase 

CFM Rating 

3,165cfm 

Filter Bag Fitted Needlefelt, 12x5 micron 






Order no. 

Price 

CT-005VB-3PH $1,995.00 


47


CARBA-TEC ® PERSPEX ADJUSTABLE 

LATHE DUST EXTRACTION HOOD 

Mounts directly to the bed of most mini or 

midi lathes. This unit should be used directly 

behind the work being turned. 

Order no. 

Price 

LHA-914 $69.00 

CARBA-TEC ® TWO STAGE 

DUST CYCLONES 

The main advantages of two stage cyclone 

collectors are that the heavier dust particles 

and chips fall out of the airflow before reaching 

the impeller. Unlike single stage units 

where these particles pass through the impeller 

and start clogging the filter medium. 

This unit combines these advantages with 

mobility, enabling even smaller shop users to 

tap in to the advantages of a cyclone. The 

mobile collection drum also allows you to 

remove waste easily. Note: Extremely small 

footprint, low overall height, also features an 

automatic filter cleaning. 


Motor 

2hp, 240v 

CFM Rating 

1,600cfm 

Filter Bag Fitted Pleated Canister 

Filtration Bag 1 micron 

Collection Bag Type Metal Drum & Plastic 

Hose Inlet Diameter 

200mm with reducer to 

100mm 




Order no. 

Price 

UB-2100ECK $2,095.00 


Motor 

3hp, 240v 

CFM Rating 

2,200cfm 

Filter Bag Fitted Pleated Canister 

Filtration Bag 1 micron 

Collection Bag Type Metal Drum & Plastic 

Hose Inlet Diameter 

200mm with reducer to 

100mm 




Order no. 

Price 

UB-3100ECK $2,595.00 

CARBA-TEC ® 2HP TWO STAGE 

CYCLONE DUST EXTRACTOR 

Requires a lead with a standard 10A plug. 

This machine has an approximate airflow of 

1,380CFM and a very low noise level of 80 

decibels. Steel impeller size: 368mm. Filter 

cartridge surface area: 8m2. 


Motor 

2hp, 240v 

CFM Rating 

1,380cfm 

Filter Bag Fitted Pleated Cartridge 

Cartridge Diameter 400mm 

Filtration Material 

2 micron, Spun Bond 

Polyester 

Collection Bag Type 130L Bin & Plastic 

Number of Inlets 1x175mm dia. 



Order no. 

Price 

CT-702 $2,495.00 

CARBA-TEC ® 3HP TWO STAGE 

CYCLONE DUST EXTRACTOR 

Requires a lead with a 15A plug or can be 

hard wired by a licensed electrician. Also 

supplied is a bin extension increasing your 

bin capacity to 200L. Using the bin extension 

will increase the overall height of the 

unit to 2.65m. This machine has a very low 

noise level of 83 decibels. Steel impeller size: 

394mm. Filter cartridge surface area: 10m2. 


Motor 

3hp, 240v or 3hp, 415v 

CFM Rating 

1,650cfm 

Filter Bag Fitted Pleated Cartridge 

Cartridge Diameter 511mm 

Filtration Material 

2 micron, Spun Bond 

Polyester 

Collection Bag Type 130L to 200L Bin & Plastic 

Number of Inlets 1x200mm dia. 



Order no. 

Price 

CT-703-1PH $2,995.00 

CT-703-3PH $2,995.00 

BIG GULP LATHE HOOD 

Mounts using a t-slot style fitting on to the 

bed of most midi to full size lathes. Articulated 

arm allows you to swing the hood away 

or adjust to accommodate larger work. 

Order no. 

Price 

BGL-1 $89.00 

BIG GULP 

Large 330 x 406mm throat 

on this hood makes it ideal 

for collecting dust from 

problem machines. It’s 

lightweight, portable and 

easy to position. Made 

from ABS plastic with a 4” 

port to connect to any dust 

collection system. 8.5kg. 


BGS-1 Big Gulp With Stand $119.00 

DBGULP Big Gulp Dust Chute $20.00 

FLOOR SWEEP 

Attaches to 4” hose or can be attached to 

4” downpipe/sewerage pipe etc. Base is 22” 

x 7”, outlet 4”. 

Order no. 

Price 

M-015 $10.00 



DUST EXTRACTION 

GROUNDING 

KIT FOR HOME 

WORKSHOPS 

Non-metallic ductwork 

connecting 

woodworking equipment 

to a dust collector 

should be internally grounded to minimise 

the possibility of fires caused by static. 15m 

of wire. 

Order no. 

Price 

GK-50 $22.00 

ADJUSTABLE 

DUST ARM 

Attaches to a 

table or mounts to 

a wall or ceiling. 

Arm extends 44” 

vertically and 

60° horizontally. 

Plastic hood has 

4” x 10” opening, 

accepts 4” hose. 

Order no. 

Price 

ADA-1 $89.00 

3-WAY DUST COLLECTION JUNCTION 

Add more tools to your dust collection system 

by branching off your main line with this 

3-way Dust Collection Junction. All ends 

have a 4’’ O.D. and a 3-3/4’’ I.D. Works well 

with blast gates, keeping suction to a maximum. 

Order no. 

Price 

RK-42289 $22.00 

DUST CHUTE 

10” x 4” plastic. 370g. 


M-134 $15.00 

CLEAR DUST 

EXTRACTION KIT 

This kit includes 

8 x 100mm x 

1m lengths, 

2x 100mm 90° 

Bends, 2 x 

100mm 90° 

branches, 2 x 

100mm 60° bends, 3 x 100mm Blast Gates, 

16 x joiners and mounting hardware. 

Order no. 

Price 

YW-2000 $199.00 

CARBA-TEC ® 

4” DUST 

COLLECTION 

ACCESSORY 

KIT 

Includes: 2 x 

3m lengths of 

4” hose, 4 x 

blast gates, 10 x stainless steel hose clamps, 

1 x Y-junction, 1 x floor sweep, 1 x saw table 

dust hood, 1 x universal dust hood and 1 x 

jointer dust hood. 8kg. 

Order no. 

Price 

DCK-3 $99.00 

NEW 

DUST RIGHT 

4” QUICK 

RELEASE 

STARTER KIT 

Dust Right 4’’ Quick 

Release Starter Kit Move 

dust collection from one tool to the 

next like never before! One end of the 4’’ 

Dust Right Tool Port connects tightly to any 

tool with a 4’’ dust port, while the other end 

fits perfectly into the Dust Right Handle. 

Kit Includes: 

• Two 4” Dust Right TM Tool Ports with Two 

Metal Hose Clamps. 

• Dust Right TM Handle 

Order no. 

Price 

RK-42354 $39.00 

DUST DEPUTY 

CARBA-TEC ® DUST 

DEPUTY - BY ONEIDA 

AIR SYSTEMS 

The dust deputy is an 

extremely efficient, 

cyclonic pre-separator for 

vacuums. Trap dust in the 

barrel and NOT in your shop 

vacuum. The Dust 

Deputy will filter 99% 

of sanding dust, with 

only 1% going into the 

vacuum. Extend the 

life of your vacuum and 

filters! Maintain maximum 

suction, no loss 

of airflow, and an end to 

clogged filters. The tapered inlet and outlet 

accommodates different sized hoses and 

couplings. Made in USA. 

Order no. 

Price 

DDAUS $189.00 

DIY DUST DEPUTY 

KIT - CYCLONE 

ONLY 

You now have even 

more options of mounting 

the Dust Deputy in 

your shop, and easier 

hose connections with 

the tapered inlet and 

outlet (2” inner diameters). 

Note: Bucket, 

hardware and hoses 

required, but not included. 

Order no. 

Price 

DD-DIY $69.00 

SUPER DUST 

DEPUTY 

High efficiency cyclone 

separates 98% 

of wood waste before 

the filter. Filter clogging 

will no longer 

reduce airflow. 

Order no. 

Price 

DD-SUPER $549.00 

CARBA-TEC ® DUST WAND KIT 

This ingenious kit hooks onto the end of your 

dust extraction hose allowing you to walk 

around your workshop to pick up shavings 

and dust. Kit includes: adjustable dust wand 

handle, clear length of tubing, quick connect 

blast gate, floor sweep intake and an additional 

dust wand handle that has bristles for 

cleaning benches, etc. 3kg. 

Order no. 

Price 

YW-1106 $49.00 

NEW 

DUST RIGHT 4” TOOL PORTS 

One end connects tightly to any tool with a 

4” dust port, while the other fits perfectly into 

the Dust Right Handle (which connects to 

4” hose and, ultimately, your dust collector), 

allowing you to move dust collection from 

tool to tool like never before! Includes two 

ports and two metal hose clamps. Does not 

include handle as shown. 

Order no. 

Price 

RK-25516 $20.00 

2-1/2” HOLD TITE HOSE KIT 

Includes: 2-1/2” Hose, extends 260 x 

1000mm, 2 x couplers, tapered, wide nozzle. 


HTH-970 Hold Tite Hose Kit $15.00 

HTH-990 Hose extender kit $11.00 


49


5” METAL BLAST GATE 

Order no. 

Price 

YW-1084 $18.00 

ECONOMY PLASTIC BLAST GATES 


M-025 2.5” to 2” reducer/blast gate $7.00 

M-005 3” $7.00 

M-006 4” $7.00 

YW-1008 5” $10.00 

YW-1114 Blast Gate Bracket ONLY $7.00 

SHEET METAL BLAST GATE 


M-011 4” $26.00 

BLAST GATE 

This blast gate is designed 

to push directly onto the 

spigot of most woodworking 

machines and the opposite 

side will connect directly into 

a 4” hose. 210g. 


YW-1057 4” /90mm $10.00 

Y JUNCTIONS 


YW-1050 2-1/2” $7.00 

M-001 3” $7.00 

M-002 4” $9.00 

YW-1049 5” $13.00 

ELBOWS 


M-004 4” $9.00 

PLASTIC 

CONNECTORS 

Primarily used for 

joining lengths of hose. 


M-017 3” $5.00 

M-018 4” $8.00 

STEPPED 

REDUCER 

2.5” to 2”, 1.5”, 1.25” and 

1”. Cut off the unwanted 

portion with a handsaw. 

Order no. 

Price 

M-031 $9.00 

LARGE STEPPED 

REDUCER 

6” to 5”, 4”, 3”, 2.5”, 

2” and 1”. Cut off the 

unwanted portion with 

a handsaw. 

Order no. 

Price 

YW-1039 $10.00 

REDUCERS 


M-036 6” to 5” Metal $38.00 

M-037 6” to 4” Metal $36.00 

M-035 5” to 4” Plastic $10.00 

M-009 4” to 3” Plastic $7.00 

W-1022 2.5” to 1.5” Plastic $7.00 

TAPERED STYLE REDUCERS 


M-038 4” to 2.5” Plastic $7.00 

M-030 4” to 2” Plastic $7.00 

YW-1094 4” to 2.25” Plastic $7.00 

OFFSET REDUCER 


M-039 4” to 2.5” Plastic $7.00 

DUST HOSE J-HOOKS 

These items allow you to get your dust extraction 

hose, ropes and coils of wire up off 

the workshop floor, minimising trip hazards. 


JH-2PCE Sold in pairs $7.00 

INSIDE THREADED RUB- 

BER DUST FITTING 

The flexible rubber fittings 

form a better seal on the 

hose and allow for quick 

connection to machinery 

and other rigid fittings. 


HM-1112 2” $8.00 

HM-1113 3” $10.00 

HM-1114 4” $12.00 

DUST SEPARATOR LID 

Converts your single 

stage dust collector 

into a more efficient 

two stage system. 

2x4” ports fitted as 

standard. 

Order no. 

Price 

DBS-1 $27.00 

CONNECTORS 

Allows fitting to fitting connection 

without the need 

for hose in between. 


YW-1070 4” $7.00 

OUTSIDE THREADED 

DUST FITTINGS 

Simply screws inside the 

spiral hose. 


M-10145 5” to 5” connector $9.00 

M-10143 4” to 3” reducer $9.00 

M-10146 4” to 2-1/4” reducer $9.00 

M-10136 4” to 4” connector $9.00 

M-10141 3” to 3” connector $9.00 

4” SUPER FLEX TM 

DUST EXTRACTOR 

HOSE Capable of being 

concertinaed to almost 

1/3 of it’s fully extended 

length. 


HOSE42B 4” x 2m long $27.00 

HOSE43B 4” x 3m long $38.00 

HOSE (SOLD PER 

METRE) 

Our strongest hose 

yet less flexible than 

our SuperFlex TM hose. 


HOSE2 2” $12.00 

HOSE2.5 2.5” $13.00 

HOSE3 3” $14.00 

HOSE4 4” $15.00 

HOSE5 5” $27.00 

HOSE6 6” $33.00 

HOSE CLAMP 

Band type with thumb 

screw adjustment. 


YW-110T 4” $6.00 

HOSE CLAMPS 

Wire or band type may 

be supplied depending 

on availability. 


M-052 2” $3.00 

M-052.5 2.5” $3.00 

M-053 3” $3.00 

M-054 4” $3.00 

M-055 5” $3.00 

M-056 6” $3.00 


Safety & Workshop Accessories 

RESPIRATOR 

MASK 

P2 respirator masks 

with exhalation 

valve. Dual headstrap 

for optimum 

fit. Pack of 12. 

UVEX EARMUFFS 

These top class 

earmuffs are Class 

5 ear protection and 

are rated at 27 decibels. Fitted 

with adjustable headband. 

SAFETY GOGGLES 

Clear polycarbonate goggles. These safety 

goggles are scratch resistant and are able 

to be worn over the top of reading glasses. 


80PC321 Respirator Mask $29.00 

UVEX2-27DB Uvex Earmuffs $48.00 

40SN160 Safety Goggles $11.00 

3M DISPOSABLE 

HALF FACE 

RESPIRATOR 

MASK 

An excellent choice 

for work settings involving 

heat, humidity 

and long periods 

of wear. Classified 

as an A1B1E1K1P2 

respirator. Able to 

be used for protection 

from dusts, mists, fumes, smokes, as 

well as organic vapours, acid gases, sulphur 

dioxide and ammonia. 

Order no. 

Price 

3M-4279 $49.00 

FULL 

FACESHIELD 

Perfect for woodturning, 

this full, 

clear polycarbonate 

face shield is 

scratch resistant 

and the visor can 

be replaced. Adjustable 

headband. 

275g. 

Order no. 

Price 

40VC105 $39.00 

PROFESSIONAL FACE SHIELD 

In addition to providing excellent protection, 

this newly developed face shield is exceptionally 

comfortable and easily adjusts for fit 

and shield angle. Its contoured frame wraps 

around your face to protect your chin and 

forehead, much like a goalie mask. Suitable 

for prolonged use, it has a cushioned 

headband with a washable brow pad. The 

headband adjusts and secures easily using 

a rear-knob double-ratcheting system. The 

tough polycarbonate shield has a scratchresistant 

anti-static and anti-fog coating. 

Measures about 9-1/2” wide by 13” tall and 

weighs 12 oz. Made in the USA. 


22R72-60 Face Shield $59.00 

22R72-61 Repl. Shield. ea. $29.00 

PAFTEC CLEANSPACE ® RESPIRATOR 

Designed and assembled in Australia this 

innovative mask solves many of the inherent 

problems in dust mask technology. At 

around 500g this unit is the smallest and 

lightest powered respirator in the world. 

Easily adjusted to fit around the back of 

your neck. The responsive flow control software 

responds to air flow demand breath 

by breath, making it pleasant and easy to 

breathe. Complies with AS/NZS1716 offering 

minimum 99% effective filter efficiency for 

particulate matter of 0.3um and above with 

the standard filter. Includes; Respirator unit, 

small and large neck pad, recharge unit, extra 

head strap and storage bag. 

Order no. 

Price 

PTR-1 $429.00 

POWERED DUST MASK 

Distributed by Carba-Tec ® , this affordable 

powered dust mask removes the majority of 

minute wood dust and composite particles 

down to as small as 0.4 microns. The face 

cup is made from soft silicon for enhanced 

wearer comfort. Used air is exhaled through 

the two non-return valves on the side of the 

mask. Unit takes 4 AA batteries (not included) 

or 4 equivalent rechargeable batteries 

(not included). Continuous run time on one 

set of batteries approximately 6 to 10 hours. 

Unit is provided with 3 particulate filter cartridges 

and 10 pre-filter pads. Mask weight: 

275g, Gross weight: 800g. 


SA-201 Powered Dust Mask $94.00 

SNA-201 Pre-filter Pads-10 pack $5.00 

Repl. Particulate Filter 

SA-201FLT Cartridge $10.00 

DUSTMASTER FACE MASK 

Offers protection for the face and respiratory 

system, with the filter and battery pack worn 

on a belt. Clean air is delivered via a hose 

to the head piece, and runs continuously for 

8 hours, from a rechargeable battery. 2.8kg. 

Order no. 

Price 

DM4 $995.00 

TREND XSTREME POWERED 

AIRSHIELD 

Lightweight, battery powered is a self-contained 

lightweight Powered Air Purifying 

Respirator providing all-in-one respiratory 

protection against dust, fumes and particulates, 

combined with eye and face protection 

against impact and liquid splash. 

• Low noise fan motor provides initial rate 

airflow of 210 litres per minute (lpm) 

(150lpm minimum at end of battery life). 

Low battery audible alarm. 

• Polycarbonate faceshield with nylon 

elasticated faceseal-tinted and clear 

overlays are available for the faceshield. 

• On-off switch easily operated with 

gloved hand. 

• Air flow indicator pre-checks battery and 

filter performance and condition. 

Order no. 

Price 

TREND-XS $529.00 


51


QUARTZ 

HALOGEN LOW 

VOLTAGE 55W 

LAMP SYSTEM 

WITH 500MM 

ARTICULATED 

ARM. So often it is 

difficult to arrange 

machinery within 

the workshop so 

that maximum 

natural light is always available or so that the 

fluorescent workshop lights really illuminate 

the machine in question. The CARBA-TEC 

articulated lamp solves this problem. 2.7kg. 

Choose 3 optional mounting systems below . 


JW-55NTL Lamp $125.00 

CARBA-TEC ® FLEX- 

IBLE LED LIGHT 

An excellent addition 

to any workshop. 

This light has a 7 LED 

light head and can 

be positioned almost 

anywhere by means 

of the flexible arm. 

The magnetic base 

will clamp to any steel 

surface or alternatively the included vise 

clamp can be used to clamp to any surface 

with a thickness of 60mm or less. 570g. 

Order no. 

Price 

CT-LED7 $41.00 

FLUORESCENT 

MAGNIFYING 

LAMP WITH 

ARTICULATED 

ARM 

Fitted with magnifying 

lens ( x 

3 magnification) 

and fluorescent 

lamp. Allows you 

to do small work 

more easily and 

with less eye strain. Clamps to benches up 

to 43mm thick. 


JF-30LEB Lamp $132.00 

Lens magnifying 

JF-DOUBLER doubler $31.00 

QUARTZ 

HALOGEN LOW 

VOLTAGE 20W 

LAMP SYSTEM 

WITH 700MM 

WITH FLEXIBLE 

GOOSENECK 

So often it is difficult 

to arrange 

machinery within 

the workshop so that maximum natural light 

is always available or so that the fluorescent 

workshop lights really illuminate the machine 

in question. CARBA-TEC ® Stayput lamps 

solve this problem. 1.92kg. 

Order no. 

Price 

HL-700 $94.00 

OPTIONAL BASES 

Three optional mounting systems are available. 

With the most popular being the permanent 

magnetic base. This is recommended 

for most applications. 500g. 

Also available is the angle clamping bracket 

which can be clamped to table tops, etc. with 

a maximum thickness of 42mm. 440g. 

For wall mounting use the right angle bracket. 

180g. 


J-M01 Magnetic Base $13.00 

J-C02 Mounting Clamp $9.00 

J-L02 Right Angle Bracket $6.00 

LIMBER 

MAGNETIC LED 

LIGHT 

A convenient micro 

light for direct spot 

lighting. This tool has 

a flexible shaft 300mm 

in length and a magnetic 

base allowing it 

to be used on a variety 

of machinery. 85g. 

Order no. 

Price 

CT-MLL $15.00 

HEADBAND LOUPE WITH 

INTERCHANGEABLE LENSES 

For close work on models, stamps, electronics, 

watch making or other intricate crafts, 

etc. a headband loupe is essential. It allows 

both hands to be used for the purpose at 

hand. This was the best unit we could find 

on the market and it is highly recommended. 

Unit fitted with three powerful LED lamps 

(requires 3 AAA batteries, not included). Interchangeable 

lenses with magnification factors 

of 1, 1.5, 2 & 2.5 included. Can be used 

with or without your spectacles. The wearing 

weight is 195g. Shipping weight is 560g. 

Order no. 

Price 

LP-1525 $52.00 

10X MAGNIFIER LOUPE 

This loupe has great resolution, adjustable 

focus, and a wide viewing angle. All properties 

of a professional loupe. The removable 

scale plate can be interchanged with a nonscaled 

lens. The LED clip-on light will illuminate 

the surface as necessary. 

Order no. 

Price 

30C04-07 $59.00 

SLIDING 20X LOUPE 

20 times magnification. 

A light automatically 

turns on when you slide 

the loupe open. Batteries 

included. 

Order no. 

Price 

CT-1021 $5.00 

HAND HELD 4 X MAGNIFIER 

Overall length 200mm. Fitted with 6 bright 

LED’s surrounding the lens. Two switch settings 

allowing one or five LED’s to be illuminated. 

Requires 2 AAA batteries, not supplied. 

Order no. 

Price 

CT-1065 $9.00 

SURGICAL BRUSHES (6 Pairs) 

If you have had an operation recently, you 

may have used this nylon brush with a foam 

pad on the back of it to self-prep the operating 

area. The nylon brush is intended for use 

directly on skin and is gentle but very effective. 

What is amazing is the way it can winkle 

dirt out of your cuticles and from under your 

fingernails; in non-medical use this solves a 

constant problem for gardeners and woodworkers. 

Although it measures only 50 x 

75mm, it has 1440 individual bristles that are 

subtle but insistent, cleaning your hands far 

better than any combination of stiff bristles 

and cloths. Made in USA. 

Order no. 

Price 

CA-203 $9.50 



AMBIDEXTROUS CARVING 

GLOVE 

This glove can be worn on the 

right or left hand to protect the 

wearer from sharp knives and 

chisels, whilst carving and whittling. 

The fabric of the glove 

is embedded with KEVLAR TM . 

Greatly minimising the risk of 

8 POCKET 

PROFESSIONAL NAIL BAG 

Steel blue colour. Set includes 

tool bag and metal hammer 

hangers. 

Order no. 

Price 

AR-675 $29.00 

BENCH DOG BENCH 

COOKIE TM PLUS WORK 

GRIPPERS BY 

ROCKLER - 4 PK 

Turn Bench Cookie Plus Work 

Grippers into shop fixtures. 

Standard and XL Risers (35142 

and 34671 sold separately) 

penetration of sharp objects. screw into Bench Cookie CARBA-TEC ® 

Plus discs to elevate them for 


work with saws and other shop 

ACGS Small $21.00 

tools that require extra height. 

ACGM 

ACGL 

Medium 

Large 

$21.00 

$21.00 

Standard Risers achieve a three 

Bench Cookie height and XL 

10 POCKET 

PROFESSIONAL NAIL BAG 

Steel blue colour. Set includes 

tool bag and metal hammer 

hangers. 

Risers achieve both two and 

three Bench Cookie heights. 

(Each Bench Cookie is 3’’ dia. x 

1’’ thick). All Risers fit 3/4” bench 

dog holes or 3/4” holes drilled 

Order no. 

Price 

into sawhorses or other fixtures 

for a secure base while you work. 

AR-975 $41.00 

Order no. 

Price 

RK-38052 $15.00 

CANVAS APRON 

Designed with cross-back shoulder 

straps to prevent neck strain, 

our new apron is made from 

100% cotton canvas, a washable 

material that is lightweight yet 

strong. At 86cm long by 70cm 

wide, it provides ample side and 

front coverage. The adjustable 

shoulder straps secure with lowprofile, 

unobtrusive clips, and 

the adjustable waistband has a 

quick-release buckle. The top 

pocket has three compartments 

for your convenience. 

Order no. 

Price 

67K10-06 $49.00 

CANVAS CHISEL AND 

GOUGE ROLLS 

Specially designed for cabinetmakers’ 

chisels and larger gouges. 

The flap folds down over the 

blades to protect them when the 

tools are rolled up. All are fully 

bound, made of heavy-duty canvas 

with a sturdy cloth tie. Made 

in Canada. 


67E01-01 6 Pocket $14.00 

67E01-02 9 Pocket $18.00 

67E01-03 12 Pocket $22.00 

CHISEL ROLLS 

Chisels not inc. Suits carpenters 

and carver’s chisels. 


AR-9 9 Place $31.00 

AR-12 12 Place $35.00 

AR-13 13 Place $41.00 

11 POCKET PROFESSIONAL 

TOOL APRON Steel blue 

colour. Suits waist from 82 to 

120cm. Set includes tool belt 

and metal hammer hangers. 

Order no. 

Price 

AR-175 $69.00 

16 POCKET 

PROFESSIONAL TOOL 

APRON 

Steel blue colour. Suits waste 

from 82 to 120cm. Set includes 

tool belt and leather hammer 

hangers. 

Order no. 

Price 

AR-200 $83.00 

50MM LEATHER TOOL BELT 

Made in saddle brown with two 

tangs. Suits waist from 82 to 

120cm. 

Order no. 

Price 

AR-275 $12.00 

RISERS FOR BENCH 

COOKIES PLUS 

Standard risers double the 

height and XL risers allow you to 

double or triple the height of your 

Bench Cookie TM . 


RK-35142 Risers 2pk $6.00 

RK-34671 XL Risers 4pk $11.00 

BENCH COOKIE TM CONES 

Lift, Grip, Protect, and Finish 

your project with Bench Cookie 

Work Grippers and Bench 

Cookie Cones! 

Order no. 

Price 

RK-40607 $7.00 

A. 

B. 

A. LEATHER SHOP APRON 

A wonderful all-purpose leather 

apron. Great protection in the 

workshop. 900g. 

B. DELUXE 

LEATHER SHOP APRON 

Our best apron. Complete with 

split leg and 1 pocket. Note that 

pocket is worn on the inside. 

1kg. 

Order no. 

Price 

A. AR-1783 $45.00 

B. AR-2943 $55.00 


53


ROUTER MAT 

Stops those 

tricky jobs from 

running away 

from you. Sand, 

carve, plane or 

rout on this slip 

resistant mat. 

Measures 610 x 

910mm. 

Order no. 

Price 

P-2436 $10.00 

STACKABLE 

UTILITY BOX 

Inside dimensions 

330x240x95mm with 

removable and 

rearrangeable 

compartments. 

Order no. 

Price 

CT-3086C $16.00 

STACKABLE 

UTILITY BOX 

Inside dimensions 

440x320x95mm 

with removable 

and rearrangeable 

compartments. 

Order no. 

Price 

CT-3086B $25.00 

STACKABLE 

UTILITY BOX 

Outside 

dimensions 

420x330x60mm 

with 20 removable bins. Lid interlocks 

with bins. 

Order no. 

Price 

CT-3086A $12.00 

INDUSTRIAL 

STEEL 

SHELVING 

1830mm high, 

1955mm wide, 

610mm deep. 

Maximum load 

on individual 

shelf is 360kg when 

evenly spread over entire shelf. 

Order no. 

Price 

GR-4XHD $295.00 

SHELVING UNIT 

1830mm high, 1015mm 

wide, 405mm deep with 

5 moveable shelves. 

Maximum load per shelf 

is 150kg when evenly 

spread over the entire 

shelf. 

Order no. 

Price 

GR-5MD $75.00 

Belts & Braces 

A. CASUAL BRACES 

2” x 48” long, Fully elasticised. Black heavy 

duty clips and genuine black leather cross 

patch. 

Order no. Design Price 

MAX-BL-TMYE Yellow Tape $12.00 

MAX-BL-TMRE Red Tape $12.00 

MAX-BL-ELEC Electrician $12.00 

MAX-BL-PAIN Painter $12.00 

MAX-BL-BUIL Builder $12.00 

MAX-BL-PLUM Plumber $12.00 

MAX-BL-GRAS Garden $12.00 

MAX-BL-FISH Fishing $12.00 

MAX-BL-AUST Aussie Flag $12.00 

MAX-BL-BLUE Blue $12.00 

MAX-BL-BLAC Black $12.00 

MAX-BL-RED Red $12.00 

MAX-BL-YELL Yellow $12.00 

MAX-BL-GREE Green $12.00 

B. CONSTRUCTION BRACES 

2” x 48” long, non-elastic fronts double elasticised 

backs with black heavy duty clips 

and genuine black leather cross patch. 


MAX-CBL-ELEC Electrician $12.00 

MAX-CBL-PAIN Painter $12.00 

MAX-CBL-BUIL Builder $12.00 

MAX-CBL-PLUM Plumber $12.00 

MAX-CBL-BLUE Blue $12.00 

MAX-CBL-BLAC Black $12.00 

MAX-CBL-RED Red $12.00 

MAX-CBL-YELL Yellow $12.00 

MAX-CBL-GREE Green $12.00 

C. PADDED CONSTRUCTION BRACES 

2” x 48” long, non-elastic fronts double elasticised 

backs with black heavy duty clips and 

genuine black leather cross patch, also with 

adjustable shoulder pads. 


MAX-CBL-PAD Padded $19.00 

CASUAL BELTS 

1-1/4” x 48” long, polyester with black military 

style buckle. 


MAX-BEL-ELEC Electrician $12.00 

MAX-BEL-PAIN Painter $12.00 

MAX-BEL-PLUM Plumber $12.00 

MAX-BEL-BUIL Builder $12.00 

CONSTRUCTION BELTS 

2” x 48” long, construction belt with side release 

buckle. 


MAX-CBEL-TMYE Electrician $12.00 

MAX-CBEL-TMRE Painter $12.00 

Garden 

Painter 

Plumber 

Electrician 

Builder 

Aussie 

Fishing 

Red Tape 

Yellow Tape 

Red 

Green 

Black 

Blue 

Yellow 


Metalworking & Accessories 

CARBA-TEC ® SIEG MICRO 

MILLING MACHINE X0 

• Ideal for the model maker or 

electronics enthusiast. 

• Accuracy and compact design 

allow drilling of holes up to 6mm 

diameter. 

• The cast iron base provides 

stability, heft and dampens 

vibration. 

• Digital read-out of the quill travel 

with zeroing facility and choice 

of metric or imperial units. 

• Coarse or fine downfeed 

Note: Table shown supplied 

separately. 

Most popular accessories to suit: 

CARBA-TEC ® SIEG SMALL 

MILLING MACHINE X2 

• Cast iron construction with finely 

ground table, hardened slide 

ways and a variable speed 

spindle drive. 

• The head and column tilt to 45° 

left or right which is a plus for 

complex jobs. 

• The headstock quill has a fine 

downfeed feature for milling and 

a rack and pinion downfeed 

system for drilling. 

• An excellent choice for the 

model engineer. 


Quick Vise 

SN-10035 

Milling Table 

SN-10138 

Mill Collet Set 

SN-10139 

Micro Drill Set 

MDS-10PCE 

12 Piece 

Clamping Kit 

SN-10104 

12 Piece HSS 

End Mill Set 

EMS-12PCE 

Swivel Vise 

SN-10109 

Slotting Arbor 

SN-10129 

Collet Set 

SN-10037 

End Mill Set 

SN-10046 

CARBA-TEC ® SIEG 

MINI MILLING 

MACHINE X1 

• Constructed from cast iron 

• Perfect introduction mill to 

metal working. 

• The head tilts 45° left and 

right allowing for complex 

jobs. 

• The cross slide table is fitted 

with t-slots so that clamps 

or a vise can be used to 

secure work. 

CARBA-TEC ® SIEG SMALL MILLING 

MACHINE X3 

• Well constructed vertical mill drill 

with excellent specifications. 

• Compact size makes it the 

perfect size for just about 

any workshop. 

• Electronically variable spindle 

speed with a choice of two speed 

ranges, 

• Rectangular column with 

adjustable dovetail guides for 

the head 

• Vertical feed control wheel 

operates smoothly with scales 

graduated in steps of 0.02mm. 



HSS Mill Cutter 

Set - SN-10069 

Rotary Table 

CT-110240 

Angle Vise 

SN-10133 

Clamping Kit 

SN-10105 

Collet Set 

SN-10078 

Clamping Kit 

SN-10047 

Rotary Table 

SN-10094 

Quick Vise 

SN-10036 

Collet Set 

SN-10037 

HSS Mill Cutters 

SN-10045 

Specifications MILL-X0 MILL-X1 MILL-X2 MILL-X3 

End Mill Capacity 6mm 10mm 16mm 16mm 

Face Mill Capacity 6mm 16mm 30mm 50mm 

Spindle Stroke 40mm 30mm 180mm 80mm 

Throat 165mm 140mm 165mm 230mm 

Max. Dist. Spindle to Table 190mm 230mm 280mm 380mm 

Spindle Taper - MT2 MT3 or R8 MT3 or R8 

Spindle Speeds Approx. (RPM) 

High range: 100-5000 

Low range: 100-3600 



High range: 100-2500 ±10% 

Low range: 100-1100 ±10% 



Forward/Reverse - Yes Yes Yes 

Column Tilt - ±45° ±45° - 

Table Size - 240x145mm 390x92mm 550x160mm 

Table Cross Travel - 180mm 100mm 145mm 

Longitudinal Travel - 180mm 220mm 400mm 

Motor 1/5hp 1/5hp 1/2hp 3/4hp 

Overall Height 415mm 720mm 760mm 930mm 

Shipping/Net weight 17/14kg 56/40kg 68/50kg 198/165kg 

Price $399.00 $699.00 $825.00 $1749.00 


55


CARBA-TEC® 

SIEG 

MINIATURE 

LATHE - C0 

A quality miniature metalworking lathe, 

with a cast iron, hardened and ground bed. Fitted with 

a 3 jaw self centring 50mm dia. chuck with reversible 

jaws, single tool post taking 8mm cutting tools, splash guard and 

interlocked chuck guard for safety. The spindle thread is 14 x 1.0mm. 

An optional compound slide is available. Standard accessories include 

50mm tommy bar style 3-jaw chuck, wrench set and oil bottle. 

CARBA-TEC ® 

SIEG MINI LATHE C3 

Standard accessories include: drip tray (not 

shown), splash back, 80mm 3-jaw chuck, MT2 

dead centre, gear change set, wrench set and 

oil bottle. 

Most popular accessories to suit CO: 

8mm Drill Chuck 

SN-10159 

Slide Table 

SN-10154 

4 jaw Self 

Centering Chuck 

SN-10181 

Live Centre 

SN-10156 

5pce Cutting Set 

SN-10004 

CARBA-TEC ® SIEG LATHE C4 

Standard accessories include: splash back, 

integral digital display, 100mm 3-jaw chuck, 

reverse jaws for chuck, MT2 dead centre, MT3 

dead centre, gear change set, wrench set and 

oil bottle. 

CARBA-TEC ® SIEG MICRO LATHE - C1 

Featuring a cast iron bed this lathe is the perfect spot to begin! The 

construction is predominantly from cast iron and steel. 

Manual or powered leadscrew feed which can be used for thread 

cutting and an extensive range of optional accessories is available. 

Maximum cutting tool shank size is 8mm. An optional compound 

slide is available. Standard accessories include 80mm 3-jaw chuck, 

MT1 dead centre, wrench set and oil bottle. 

Most popular accessories to suit C1: 

CARBA-TEC ® SIEG LATHE C6 

Standard accessories include: splash back, 125mm 

3-jaw self centring chuck, MT2 dead centre, MT3 dead 

centre, gear change set, wrench set and oil bottle. 

An optional stand with drip tray is available for this 

machine as an optional extra. 

Most popular accessories to suit C3/C4/C6: 

Parting Tool 

CT-392450 

Boring Bar 

CT-393500 

Drill Chuck 

SN-10091 

Sliding Table 

SN-10083 

Mill Attachment 

SN-10082 

Parting Tool 

CT-392450 

13mm Tailstock 

Drill Chuck 

SN-10027 

Live Centre 

GZ-11011 

Handwheel Kit 

SN-10001 

5pce Cutting Set 

SN-10004 

Specifications LATHE-C0 LATHE-C1 LATHE-C3 LATHE-C4 LATHE-C6 

Swing over bed 110mm 140mm 180mm 210mm 250mm 

Distance between centres 125mm 250mm 350mm 410mm 500mm 

Compound/Cross Slide Travel /50mm - 70mm/76mm 70mm/100mm 75mm/110mm 

Spindle Bore 10mm 10mm 20mm 20mm 20mm 

Spindle High/Low Range Speeds Approx. 100-3800rpm 100-2000rpm 100-3000rpm/100-1200rpm 150-2000rpm 125-2000rpm 

Spindle Taper - MT2 MT3 MT3 MT3 

Tailstock Taper - MT1 MT2 MT2 MT2 

Thread Cutting Pitch - 

Metric: 0.5-1.25, 5 

steps 

Imperial: 16-24 TPI, 

5 steps 

Metric: 0.4-2.0mm, 5 steps 

Imperial: 12-52 TPI, 5 steps 

Metric: 0.25-3.0mm 

Imperial: 5-24 TPI 

Metric: 0.4-3.0mm, 12 

steps 

Imperial: 10-44 TPI, 

8 steps 

Dimensions 440x270x210mm 620x300x220mm 880x290x290mm 1000x550x400mm 1200x660x600mm 

Motor 1/5hp 1/5hp 1/2hp 1-1/3hp 3/4hp 

Shipping/Net weight 25/23kg 32/23kg 56/44kg 125/94kg 180/145kg 

Price $499.00 $749.00 $1039.00 $1849.00 $1375.00 



CARBA-TEC ® SC3 

METALWORKING LATHE 

Machine brass, aluminium, gun 

metal, cast iron, industrial nylon, plastics, 

silver, gold, platinum, nickel-silver and even 

wood. This variation on our popular C3 

model now has a brushless DC motor that 

decreases noise and improves the efficient 

delivery of power to the spindle. An excellent 

choice for the model engineer. 


Swing over bed 180mm 

Distance between 

centres 

350mm 

Compound/Cross 

Slide Travel 

55/65mm 

Spindle Bore 

20mm 

Spindle High/Low 

Range Speeds Approx. 

100-2500 ±10% rpm 

Spindle Taper 

MT3 

Tailstock Taper MT2 

Thread Cutting Pitch 

12-52 TPI (18 thread 

pitches) 

Dimensions 

800x290x290 mm 

Motor 

500W 

Shipping/Net weight 50/55 kg 

Order no. 

Price 

LATHE-SC3 $1,095.00 

CARBA-TEC ® SMALL 

MILLING 

MACHINE SX2 

Cast iron construction, 

a finely milled table, 

hardened slideways 

and a variable speed 

brushless DC spindle 

drive. An excellent choice 

for the model 

engineer. 

MINI TUBE, 

SHEET 

BENDER & 

ROLLER 

Invaluable to 

hobby engineers 

or any one 

else who needs to 

bend or roll tube and small sheet materials. 

Material width capacity 75mm. 

Order no. 

Price 

SN-20013 $100.00 

VERITAS TM METAL BENDER 

Made of high-strength malleable cast iron, 

capable of bending up to 1/8” mild steel. The 

main purpose of the metal bender is to make 

bends up to 90° for such things as angle 

brackets and sheet-metal parts. 

Order no. 

Price 

50K08-01 $31.00 

200MM MINIATURE BENDING & 

CUTTING SHEAR 

Just because its small don’t shy away. This 

unit is capable of working with mild steel 

up to 22 gauge in thickness. You can bend 

and shear mild steel, brass, copper, etc. with 

ease. 12.7kg. 

Order no. 

Price 

SN-20002 $299.00 

FIVE PIECE SET 

OF 2ND CUT 8” 

FILES 

A set of finer files, 

for smoother cuts. 

Five shapes - Flat, 

Square, Round, 

Triangle & Half 

Round/Flat. 865g. 

Made in Italy. 

Order no. 

Price 

CRD-2150005 $94.00 

FIVE PIECE 8” 

BASTARD FILE 

SET 

A set of coarse 

files, for faster cuts. 

Five shapes - Flat, 

Square, Round, Triangle 

& Half Round/ 

Flat. 865g. Made in 

Italy. 

Order no. 

Price 

CRD-2150006 $94.00 

CORRADI NEEDLE FILE 12 PIECE SET 

A precision engineering quality 12 piece 

set of essential needle files. 160mm overall 

length, 80mm cut. 150g. Made in Italy. 

Order no. 

Price 

CRD-125001 $178.00 


End Mill Capacity 20mm 

Face Mill Capacity 35mm 

Spindle Stroke 

Throat 

167mm 

Max. Dist. Spindle 

to Table 

280 

Spindle Taper 

MT3 or R8 

Spindle Speeds Approx. 

(RPM) 

100-2500±10%rpm 

Forward/Reverse - 

Column Tilt - 

Table Size 

400x145mm 

Table Cross Travel 

Longitudinal Travel 280mm 

Motor - 

Overall Dimension 

Shipping/Net weight 

520x580x760mm 

58/75kg 

Order no. 

Price 

MILL-SX2 $1,095.00 

3 IN 1 PRESS BRAKE (BENDER) 

GUILLOTINE AND ROLLER 

For light duty sheet metal working this machine 

is a dream with a bending shearing 

and rolling capacity of 300mmx1mm. The 

3 rollers can be accessed by lifting the top 

cover. The smallest rolled diameter achievable 

is 38mm. 

Order no. 

Price 

CT-SBR-300 $399.00 

IRIDIUM 8” FILE CLEANING BRUSH 

This brush has fine metal ‘teeth’ that are 

essential to cleaning between the grooves 

of filing tools. 80g. 

Order no. 

Price 

CRD-1690000 $15.00 

CORRADI 

NEEDLE FILE 

HANDLE 

This solid hardwood handle 

makes for comfortable use of your 

Corradi needle files. Simply twist to release 

or lock any needle files with 1/8” round handles. 

95mm long. 20g. Made in Italy. 

Order no. 

Price 

CRD-130001 $11.00 


57


A. 

B. 

A. MINIATURE MAGNETIC 

BASE 

Features two machined magnetic 

faces. Height fully extended: 

195mm, has universal ball and 

socket joints for positioning. Accepts 

standard 8mm shank dial 

indicators, also accepts gauges 

with 6mm dovetail mounting. 

400g. 

B. LEVEL TYPE DIAL 

INDICATOR 

Dial diameter: 32mm. 7 jewels 

Graduated in 0.01mm with 

maximum deflection 1mm up or 

down. Changeable 6 and 8mm 

stem mounting fits most magnetic 

bases. 125g. 

Order no. 

Price 

A. YW-195 $41.00 

B. CG-32 $41.00 

DIGITAL 

INDICATOR 

Dial diameter 

60mm, graduated 

in 0.01mm with a 

range of 0-10mm. 

Fitted with rotating 

bezel with two 

moveable guides. 

Supplied in plastic storage case. 

200g including the case. 

Order no. 

Price 

CG-60 $37.00 

BA TAP & DIE SET 38 PIECE 

Made of high quality carbon steel 

and heat treated. Plug II size 0BA, 

1BA, 2BA, 3BA, 4BA, 5BA, 6BA, 

7BA, 8BA, 9BA, 10BA. Bottom III 

size 0BA, 1BA, 2BA, 3BA, 4BA, 

5BA, 6BA, 7BA, 8BA, 9BA, 10BA. 

Round Die 13/16 0BA, 1BA, 

2BA, 3BA, 4BA, 5BA, 6BA, 7BA, 

8BA, 9BA, 10BA. Die Handle 

13/16. Mini Straight Tap Wrench 

BA thread gauge. Spindle tap 

wrench 1/16-1/4, Tap Guide 3/16. 

Order no. 

Price 

CT-140710 $115.00 

CARBON STEEL CUT 

THREAD ME TAP & DIE SET 

19 PIECE 

Made of high quality Carbon steel 

and heat treated. Contains 1/8” x 

40, 5/32” x 40, 3/16” x 40, 7/32” x 

40 tap set of 3pc each size round 

die 1/8” x 40, 5/32” x 40, 3/16” x 

40, 7/32” x 40, Die stock handle 

2nos, Straight tap wrench 1nos. 

Order no. 

Price 

CT-140720 $73.00 

32 PIECE MICRO HSS TAP & 

DIE SET 

Ideal for jewellers, modellers and 

hobby engineers. Set Includes: 9 

tapered taps, 9 intermediate taps 

and 9 matching dies in the following 

sizes, 1mm, 1.1mm, 1.2mm, 

1.4mm, 1.5mm, 1.6mm, 2mm, 

2.2mm, 2.5mm. 

Order no. 

Price 

MTD-32PCE $62.00 

TAPERED REAMER 

For enlarging holes and r e - 

moving burrs, etc. Tapers from 3 

to 13mm. Overall length: 123mm. 

100g. 

Order no. 

Price 

TR-127 $8.00 

5 PIECE CUTTING TOOL SET 

Tungsten carbide tipped. Includes 

L & R facing tool, v-tool, 

general purpose facing tool & 

parting tool and parting tool. 

8mm shanks. 200g. 

Order no. Suits Price 

SN-10004 All lathes $32.00 

6 PCE CUTTING TOOL SET 

Tungsten carbide tipped. General 

purpose set. 8mm shanks. 280g. 




Tungsten carbide tipped. Includes 

L & R facing tool, v-tool, 

two boring bars, general purpose 

facing tool & parting tool. 8mm 

shanks. 450g. 



CUTTING TOOL BLANKS IN 

M35 HSS WITH 5% COBALT. 

All blanks are square and 3” long. 


CT-313910 1/8”, 6g $7.00 

CT-313945 1/4”, 25g $7.00 

CT-313960 5/16”, 40g $8.00 

CT-313975 3/8”, 55g $10.00 

INDEXABLE 4 PCE CUTTING 

TOOL SET 

Replaceable tungsten carbide 

tips. 3 x 10mm square shanks 

and 1 x 10mm dia. boring bar. 

570g. 

Order no. Size/Suits Price 

CT-777200 8mm/C0/ 

C1/C3 $136.00 

CT-777201 10mm/C4/ 

C6 $136.00 

REPLACEMENT CUTTING TIPS 

Order no. 

Price 

CT-777201-TIPS $13.00 

INDEXABLE 7 PCE CUTTING 

TOOL SET 

Replaceable tungsten carbide 

tips. 12mm square shanks, 

10mm dia. boring bar. 


CT-777102 8mm/All 

lathes $230.00 

CT-777103 10mm/C4/ 

C6 $241.00 


Order no. 

Price 

CT-777104-TIPS $13.00 


10mm square shanks. HSS with 

5% Cobalt. 670g. 


CT-130032 C4/C6 $125.00 


Tungsten carbide tipped. 10mm 

shanks. Paint job is a bit rough. 

They are however, high quality 

tools. 630g. 


CT-131370 C4/C6 $45.00 


Tungsten carbide tipped. 10mm 

shanks. Paint job is a bit rough. 

They are however, high quality 

tools. 690g. 


CT-131320 C4/C6 $45.00 

BORING AND THREAD 

CUTTING TOOLS SET 

6mm round HSS cutters, 130mm 

long. 3/8” square holder to suit. 


CT-132710 6mm/All 

lathes $90.00 

CT-132720 8mm/C1/ 

C3/C4/C6 $92.00 



DEBURRING TOOL 

Comes complete with 5 

different cutting 

blades that are 

stored in the 

handle. 80g. 

Order no. 

Price 

CT-000 $36.00 

BORING BAR 

1/2” square holder with 110mm 

bar length. Holds 1/8” square 

cutters. 120g. 


CT-393500 All lathes $14.00 

PARTING 

TOOL 

10mm shank. 120g. 


CT-392450 C1/C3/C4/C6 $17.00 

SN-10145 C0/C1/C3/C6 $27.00 

STEADY REST 


SN-10080 C1, 890g $54.00 

SN-10008 C3, 1.3kg $54.00 

SN-10160 C4, $54.00 

SN-10019 C6, 2.9kg $80.00 

FOLLOW REST 


SN-10081 C1, 605g $36.00 

SN-10009 C3, 685g $45.00 

SN-10161 C4, $41.00 

SN-10020 C6, 1.5kg $62.00 

FACEPLATES with t-slots 


SN-10079 112mm dia./C1 $41.00 

Below do not have T-slots 

SN-10007 160mm dia./C3 $45.00 

SN-10023 220mm dia./C6 $50.00 

SN-10162 C4 $38.00 

WOODTURNING TOOL KIT 


SN-10157 C0, 320g $46.00 

SN-10086 C1, 690g $54.00 

SN-10064 C3 $61.00 

SN-10063 C4/C6, 2kg $62.00 

MORSE TAPER REDUCER 

Enables you to use No. 1 Morse 

Taper chucks, live centres, etc. in 

lathes fitted with No. 2 Morse 

Taper spindles. 100g. 

Order no. 

Price 

16002 $19.00 

GROZ ENGINEERING 

QUALITY EXTRA HEAVY 

DUTY LIVE CENTRES 

Replaceable and adjustable needle 

roller bearings take up the 

radial load and heavy duty thrust 

bearings for axial loads. Centre 

points are 60°. 


GZ-11010 No.1mt $62.00 

GZ-11011 No.2mt $62.00 

QUICK CHANGE TOOL POST 

Includes 4 tools rests. 


SN-10144 C1, 1.1kg $111.00 

Below include 3 tool holders 

SN-10011 C3, 1.2kg $90.00 

SN-10026 C6, 2.9kg $116.00 

SN-10168 C4, $115.00 

CARRIAGE STOP 


SN-10182 C3 $16.00 

DRIVE DOG 10mm bore. 50g. 



MILL ATTACHMENT 


SN-10060 C6, 5.9kg $230.00 

SN-10061 C3, 5.4kg $230.00 

SN-10082 C1, 4.9kg $146.00 

HAND FEED KNURLING TOOL 


SN-10130 C1/C3/C4/C6, 

660g $54.00 

DEAD CENTRE WITH MT3 

Order no. Weight Price 

SN-10013 320g $13.00 

DEAD CENTRE WITH MT2 

Order no. 

Price 

SN-10088 $16.00 

QUALITY ENGINEERING 

DRILL CHUCKS 


SN-10091 1-10mm,with MT1 $36.00 

SN-10012 1-13mm,with MT2 $55.00 

COMPOUND SLIDE TABLE 


SN-10154 C0, 375g $62.00 

COMPOUND SLIDE TABLE 


SN-10083 C1, 1.7kg $167.00 

4 JAW INDEPENDENT CHUCK 


SN-10010 80mm dia./C1 $125.00 

4 JAW INDEPENDENT CHUCK 

WITH FLANGE (not shown) 


SN-10029A 100mm dia./C3 $136.00 

SN-10025A 125mm dia./C6 $157.00 

4 JAW SELF CENTRING 

(not shown) 


SN-10010B 80mm dia./C1/C3 $115.00 

KNURLING TOOL 300g 


CT-391110 C1/C3/C4/C6 $25.00 

KNURLING TOOL 450g 


CT-391000 C6 $62.00 

LIVE CENTRE (not shown) 


SN-10156 C0, 75g $26.00 

LIVE CENTRE WITH MT1 


SN-10093 C1, 115g $27.00 

LIVE CENTRE WITH MT2 


SN-10024 C3/C4/C6, 550g $51.00 


59


A. 

LIVE CENTRE SET WITH MT1 

Order no. 

Price 

CT-201600 $136.00 

LIVE CENTRE SET WITH MT2 

(Not shown) 

Order no. 

Price 

CT-201610 $146.00 

HSS END MILL SETS 

Cutter set includes: 3, 4, 5, 6, 8 

& 10mm cutters in 2 flute HSS. 

115g. 


SN-10069 X1 $36.00 

Cutter set includes: 4, 6, 8, 10, 

12, 14 & 16mm cutters in 2 flute 

HSS. 115g. 


SN-10045 X3 $62.00 

HSS END MILL SETS 

Set includes: four flute cutters in 

4, 5, 6, 8, 10 & 12mm and two 

flute cutters in 4, 5, 6, 8, 10 & 

12mm. 530g. 

Order no. 

Price 

EMS-12PCE $56.00 

INDEXABLE TWO FLUTE 

MILLING CUTTER (MT3) 


SN-10046 X2/X3, $100.00 



SN-10046-CUTTER $12.00 

INDEXABLE SINGLE FLUTE 

MILLING CUTTER (MT2) 


SN-10071 X1 $62.00 



SN-10071-CUTTER $12.00 

COLLET SET 

Includes: 3, 4, 5, 6, 8 and 10mm 

in MT2. 450g. 


SN-10078 X1 $115.00 

COLLET SET (not shown) 

Includes: 4, 6, 8, 10, 12, 14 and 

16mm in MT3. 1.27kg. 


SN-10126 X2/X3 $146.00 

LATHE COLLET SETS 

Includes seven collets: 4, 6, 8, 

10, 12, 14 and 16mm. 


SN-10148 C3 $230.00 

SN-10167 C4 $230.00 

SN-10149 C6 $230.00 

MILL COLLET & CHUCK SET 

Includes: 3, 4, 5, 6, 8 and 10mm 

in MT2. 1.3kg. 


SN-10070 X1 $188.00 

MILL COLLET & CHUCK SET 

(Not shown) Includes: 4, 6, 8, 10, 

12, 14 and 16mm in MT3. 1.5kg. 


SN-10037 X2/X3 $199.00 

MILL COLLET SET(not shown) 


SN-10139 X0 $209.00 

12 PIECE CLAMPING KIT 


SN-10104 X1 $55.00 


(Not shown) 


SN-10105 X1 $73.00 


(Not shown) 


SN-10047 X2/X3 $116.00 

SLOTTING ARBOR MT2 


SN-10118 X1 $52.00 

SLOTTING ARBOR MT3 


SN-10129 X2/X3 $52.00 

DRILL CHUCK 

1 to 8mm chuck. Rear of chuck 

has internal thread to suit 14 x 1 

threaded tailstock. 


SN-10159 C0 $35.00 

10 PCE CENTRE DRILL SET 

Includes sizes: 1.2mm, 1.6mm, 

2.4mm, 3.2mm, 4.76mm and 

6.35mm 

Order no. 

Price 

CT-133000 $60.00 

KEYLESS CHUCK WITH NO. 

2 MORSE TAPER 

13mm capacity chuck with no. 

2 morse taper shank and B-16 

connection to chuck. 800g. 

Order no. 

Price 

HM-513 $39.00 

THREAD 

CUTTING 

GEARS 

Imperial set of 9 gears. 


SN-10085 C1 $27.00 

50MM QUICK VISE 


SN-10035 X1 $73.00 

10MM QUICK VISE 


SN-10036 X2/X3 $94.00 

B. 

A. 100MM DELUXE 

ROTARY TABLE 

Includes hold-down kit. 4kg. 

Order no. 

Price 

SN-10094 $349.00 

B. DIVIDING PLATE 

ATTACHMENT 

Order no. 

Price 

SN-10094-1 $94.00 

SWIVEL VISE WITH QUICK 

ACTION JAWS - 55mm jaw 

width. 3kg. 


SN-10108 X1 $136.00 

80mm jaw width. 6.1kg. 


SN-10109 X2/X3 $136.00 

ENGINEERS VISE - 130mm 

jaw width. 16kg. 

Order no. 

Price 

CT-110203 $111.00 

100MM ROTARY TABLE 

Includes hold-down kit. 4kg. 

Order no. 

Price 

CT-110240 $167.00 


Marking & Measuring 

SCRIBE & AUTO CENTRE PUNCH 

Fitted with tungsten carbide scribe tip and 

hardened steel punch tip. 135g. 

Order no. 

Price 

CT-180206 $16.00 

TRAMMEL POINTS 

One point can be interchanged with a pencil. 

Add your own wooden beam to suit any 

diameter. Pencil not included. 120g. 

Order no. 

Price 

KU-40 $47.00 

CARPENTER PENCILS AND 

SHARPENER SET 

This set of six carpenters pencils is perfect 

for cabinet makers and general woodworkers 

alike. The specially designed sharpener, 

shapes the rectangular pencils to a fine 

point. Much safer than using a utility knife as 

many do today! Great value set. 110g 

Order no. 

Price 

CT-CPS $7.00 

CARBA-TEC ® 

WOODWORKER’S 

PENCIL 

Supplied with 5.7mm pencil lead. 

Overall length of pencil is 130mm. Pencil is 

fitted with in-built sharpener. This is a complete 

pencil, not a kit. Perfect for marking 

boards or general workshop use. 45g. 


WP-5009 Pencil with lead $24.00 

WP-LEAD Spare leads 2 pack $5.00 

A. 

B. 

JAPANESE MARKING KNIVES 

These knives are irreplaceable for use in accurate 

marking out of joinery or scoring the 

surface prior to machining to prevent breaking 

out and chipping. Handcrafted, these 

tools are a welcome addition to any workshop 

and a true pleasure to use. 


A. N-0501 Marking knife & Sheath $31.00 

B. JMK-23 Kiridashi Marking Knife $27.00 

DOUBLE BEVEL MARK KNIFE 

Polished hardened steel, flat one side for 

accurate marking. Overall length: 165mm. 

Weight: 115g. 

Order no. 

Price 

PF-1228 $30.00 

VERITAS ® MICRO 

ADJUSTABLE 

MARKING GAUGE 

Our standard wheel marking 

gauge is a great workhorse and excellent 

value. Its popularity led to the development 

of a second model that incorporates a microadjust 

feature. It is similar to our standard 

wheel marking gauge with an anodized aluminium 

body, brass face, stainless-steel rod 

and internal O-ring to keep a constant light 

friction force on the rod. It differs in that the 

body is slightly longer and is fitted with a twostage 

collet that allows micro-adjustment of 

the cutting wheel. The knurled thumbscrew 

then locks the setting. The hardened steel 

wheel cuts wood fibres rather than tears 

them, which leaves a clean mark, even on 

cross grain. The wheel’s single-sided bevel 

also forces the gauge face against the stock, 

maintaining accuracy. 170g. 


05N35-10 Marking Gauge $55.00 

Optional Mortise 

15N01-01 gauge heads $14.00 

CARBA-TEC ® 

MARKING GAUGE 

Metric and imperial 

scales to 6” and 

150mm. Supplied with l e a d 

pencil points and steel scribing point. 130g. 

Order no. 

Price 

PW-101 $18.00 

CARBA-TEC ® EBONY CUTTING 

GAUGE 

1 knife, for marking 

and cutting 

lines, strips of 

wood or veneer 

and small rebate 

with or across grain, brass inlaid face. 310g. 

Order no. 

Price 

MGE-1005 $48.00 

CARBA-TEC ® EBONY MORTISE 

GAUGE 

3 pin, 2 top/1 bottom, micro 

adjustable slide, 

brass inlaid face. 

320g. 

Order no. 

Price 

MGSE-1005 $58.00 

VERITAS ® BAR GAUGE HEADS 

Simple bar gauges are among the most useful 

tools in the shop. They have two primary 

purposes, comparing measurements and 

transferring measurements. Bar gauges not 

only shine in basic measurement transfer, 

but are unequalled for inside measurements, 

such as for sizing shelves or interior trim for 

windows. Simply rip 1/4” slices off standard 

3/4” timber to make bars of the length you 

want. 10g. 

Order no. 

Price 

05N31-01 $22.00 

THREE IN ONE MARKING GAUGE 

A wheel gauge, a pin gauge, and a cutting 

gauge. The unique swivelling pin/blade 

chuck takes either a pin or a blade that locks 

in place (after extension is set) using a set 

screw in the end of the 4-1/2” gauge stem. 

The opposite end of the stem is tapped to 

accept a 3/8” diameter wheel cutter. A dozen 

spare blades, two hardened steel pins, 

a wheel cutter and a hex key are included. 

Made in Canada. 90g. 

Order no. 

Price 

05N65-01 $35.00 

VERITAS ® BEAM COMPASS HEADS 

The head clamps to any material between 

16mm and 19mm thick, of any width or 

length. The heads are held solidly on the 

beam because each clamping knob also operates 

a trapped pin that prevents pivoting 

of the head when it is clamped in position. 

The pins withdraw as the clamping knob is 

backed off. Since one of the points has an 

eccentric tip, you only need to clamp the 

heads approximately; loosen the eccentric 

tip and you get up to 1/8” of fine adjustment 

by rotating the point. Comes with two hardened 

steel points, a pencil, plus the heads. 

Order no. 

Price 

05N50-01 $75.00 


61


GARRETT 

WADE ODD 

VERITAS ® BEAM COMPASS 

JOB LAYOUT TOOL 

VERITAS ® DUAL MARKING GAUGE 

Ordinary compasses just don’t cut it in the 

We understand that “old timers” used to 

With two independently adjustable rods, 

shop; a beam compass (or trammel) is 

say: “All you needed was a #1 Odd Job, 

this gauge lets you set two measurements 

much more practical. Using a single beam 

a hammer and a saw, and you could build 

at once, so you can quickly alternate between 

them when transferring or marking 

section our compass deals with circles from 

anything”. Made by Stanley from 1888 to the 

38mm to 600mm in diameter. Additional sections 

take you up to 2032mm for circular 

early 1930’s, it seems as useful to us today 

repetitive dimensions. The hardened steel 

as it was then. Made of solid brass and steel, 

wheel cutters scribe perfectly at any point 

tables, rockers, arches, etc. It has carbidetipped 

pins that readily scribe metal as well 

it is carefully machined on all sides. It’s an 

of their circumference. Since they cut wood 

inside mitre and try square, a depth gauge, a 

fibres rather than tear, marks are clean, 

as wood, although pencil head is usually 

scribing tool for arcs and circles. A T-square, 

even on cross grain. The cutting wheels 

used for scribing wood. A micro-adjust feature 

quickly give accurate setting. 2kg. 

a depth marking scribe (excellent for marking 

out mortises), a plumb level, and the 6” 

are oriented with opposing bevels, ensuring 

that you can always set the bevel in the 

Maple Brass-edged rule (also marked in mm 

Order no. 

Price waste side of a cut. 

on the reverse side). 

05N30-01 $165.00 Order no. 

Price 


05N70-01 $69.00 

VERITAS ® TRANS- 

FER LOG SCRIBE 

This tool is used for 

transferring the contours 

of one shape 

onto another. This is 

what makes it an ideal 

log scribe. But this also 

makes it an excellent 

carpenter’s scribe. It 

can translate that notso-straight, 

100-yearold 

wall profile onto a 

cabinet panel, letting 

you get a perfect match. The rotatable double-level 

post can be adjusted and locked 

in any position on either axis. The pointed 

end of the steel pin is for compass work; the 

blunt curved end is non-marring for transfer 

scribing. Usable with any standard pencil, 

it comes with a purple indelible pencil that 

marks well with light pressure. 525g. 

Order no. 

Price 

05U05-01 $125.00 

VERITAS ® SLIDING BEVEL 

The obvious benefit of this design is that the 

locking mechanism is completely flush, allowing 

the bevel to be used on either side. 

But more important, it can be used in the 

most restricted places since the lever cam 

lock can be operated with a single finger. 

Since the locking mechanism operates by 

compression with no rotary movement, accuracy 

is perfect. This is the best sliding bevel 

design on the market. Two sizes available. 

550g/400g. 


05N44-01 Large $69.00 

05N44-02 Small $62.00 

23N02-01 $39.00 

VERITAS ® 

TAPERED 

GAUGES 

This gauge gets 

its accuracy by 

effectively stretching 

any scale for 

accurate reading. 

These stretch the 

standard scale by a 

factor of seven. When a thickness difference 

of 1/8” is stretched over 7/8” of the scale, 

small differences in thickness can easily be 

measured with fine accuracy. Used many 

ways - for setting fences, router bits and 

drill-press stops. 104g. 

Order no. 

Price 

05N38-03 $46.00 

VERITAS ® CARPENTER’S GAUGE 

Specifically designed to be carried in an 

apron or pocket, this is both a direct-reading 

compass and a marking gauge, two things 

that carpenters frequently need but find hard 

to carry. It has a rotatable head, which locks 

vertically for use and horizontally for storage 

and tip protection. It is direct reading, 

for both radius and diameter, in inches and 

centimetres. Made of brass, stainless steel 

and high-impact ABS, it is 7-1/2” long overall, 

and will scribe circles up to 12” diameter. 

Patented. Made in Canada. 

Order no. 

Price 

05N36-01 $31.00 

VERITAS ® 

BEVEL 

SETTER 

A sliding bevel 

is an excellent 

tool for transferring 

angles but 

not for reading 

them. This bevel 

setter lets you set specific angles (from 0° 

to 60° in 1/2° increments) on a sliding bevel 

or a workpiece as well as read angles already 

set. Both functions are useful for dovetailing, 

for machine set-up, for polygon work, 

or for accurately fitting a piece in a restricted 

location. The etched stainless-steel blade is 

3” wide and 7” long. 300g. 


05N66-01 Imperial $49.00 

05N66-03 Metric $49.00 

Sold separately 

PRECISION DOUBLE SQUARES 

Available with a 100mm (4”) blade or a 

150mm (6”) blade, it features a slimmer than 

normal stock and an accuracy guaranteed 

to be better than 0.001” per inch, exceeding 

our regular machinist’s squares. It doubles 

as a try square and a precision square, 

suitable for both layout work and machinery 

set-up and checking. The precision openwork 

casting not only provides the accuracy 

required but avoids the stock-heavy feel of 

most machinist’s squares. The blade locks 

securely in any position from full left to full 

right. Graduations in imperial. Made in USA. 


24N08-01 4” (100mm) $32.00 

24N08-02 6” (150mm) $35.00 



IRWIN MARPLES 

ADJUSTABLE BEVEL 

Blade length: 300mm. 

Order no. 

Price 

IRW-10503547 $46.00 

GROZ DEPTH & ANGLE GAUGE 

The ability to measure depth and angles is 

combined in this versatile tool. The head is 

made from selected steel and has an attractive 

black finish. It is graduated both left and 

right to 15°, 30° & 45° and the rule can be 

set to any of these angles. Tool supplied with 

150mm rule. 250g. 

Order no. 

Price 

GZ-1214 $15.00 

FLEXIBLE CURVE WITH RULER 

This flexible plastic rule is great for making 

patterns or marking out curves. Ruler measures 

60cm in 1mm graduations. 145g. 

Order no. 

Price 

D-00503 $15.00 

MACHINISTS SCRIBE 

This scribe is for machinists, engravers, 

mechanics and craftsmen. A basic tool for 

scribing and marking, these can be used on 

metal, glass, plastics and ceramics. Scriber 

points are hardened to 55-60 HRC. 

Order no. 

Price 

GZ-03210 $10.00 

EMPIRE PROFESSIONAL 

COMBINATION SQUARE 

Stainless steel blade, made in USA, 300mm 

blade length. Used for making accurate 45° 

& 90° markings, etc. 128g. 

Order no. 

Price 

IRW-250M $45.00 

9” ROSEWOOD SLIDING BEVEL 

Steel blade, used for marking and transferring 

angles. 170g. 

Order no. 

Price 

CT-260435 $20.00 

ANGLE FINDER 

For external and internal angles its the most 

efficient, innovative, versatile angle finder 

available. Made of solid aluminium. Main 

arm is 500mm long. 270g. 

Order no. 

Price 

T-103C $22.00 

COMBINATION SQUARE SET 

A nice quality combination square and reasonably 

priced too! Set has metric and imperial 

scales with non-reflecting finish, centre 

finder, protractor and 90-45° stock. Rule is 

300mm in length - in 0.5mm & 1/32” graduations. 

Supplied in plastic storage case. 

1.4kg. 


CSQ-1625 Square Set $62.00 

PRECISION ENGINEERING BOXED 

SQUARE SET 

Includes 150, 100 & 50mm squares. Hardened 

steel blades are fixed permanently to 

the stock by means of a tapered self locking 

rivet which ensures complete rigidity. 725g. 


GZ-01012 Set of 3 $73.00 

GZ-01000 50mm only $19.00 

GZ-01002 100mm only $26.00 

GZ-01003 150mm only $29.00 

NOBEX 

OCTO 

SQUARES 

A folding square with locking 

positions at every 22.5° 

détente between 0° and 

180°. Each position has a 

guaranteed tolerance of ±0.05°. 


NBX-OCTO200 200mm $47.00 

NBX-OCTO300 300mm $50.00 

NBX-OCTO400 400mm $58.00 

IRWIN MARPLES 

STAINLESS SQUARES 

Order no. Blade Length Price 

IRW-10503545 350mm $44.00 

IRW-10503544 300mm $40.00 

IRW-10503543 250mm $37.00 

VERITAS ® DOVETAIL MARKERS 

For quick, accurate marking of dovetails, a 

dovetail marker is the best tool available. 

With riding ledges on both sides, this 2” x 

2” marker can be flipped over to mark both 

slopes of the dovetail. Made from anodised 

aluminium. Available in a set of the traditional 

ratios: 1:6 for softwood and 1:8 for hardwood, 

or the new 14˚ model for thin material 

providing stronger interlock. 70g. 


05N10-10 Set of 2 $16.00 

05N10-12 14° single $9.00 

DOVETAIL 

SADDLE 

MARKERS 

For quick, accurate 

marking 

of dovetails, a 

dovetail marker 

is the best tool 

for the job. 

These new 

dovetail saddle 

markers are 

precision machined 

at 1:6 and 1:8 angles, the traditional 

angles for softwood and hardwood dovetails 

respectively. The new 14˚ angle is great for 

thin stock providing stronger interlock. The 

long legs ensure accurate registration. The 

inside corner is relieved to ensure flush seating 

even on saw whiskers. Made from anodised 

aluminium. 100g. 


05N61-04 1:6 Marker $19.00 

05N61-05 1:8 Marker $19.00 

05N61-08 14° Marker $19.00 


63


STOP RULE - 30CM 

These are handy for layout and machine set-up, because the movable stop provides a reliable 

reference point. You can use them to locate saw fences, plot the position of hardware 

mounting holes, set the height of a saw blade or router bit, and draw lines parallel to any 

flat surface. The stop face is 2” wide for solid registration, and the ruler tip is 7/32” thick to 

provide a broad land when using the tool as a height gauge. Graduated in Imperial/metric. 

Each scale has a vernier for adjustment to within 1/128” or 0.1mm without parallax 

error. Made from chromed steel with a non-glare matte finish, each rule has clear 

etched and black-filled markings and a knurled locking knob. 540g. 


88N89-12 30cm Stop Rule $29.00 

VERITAS ® RULER STOP 

The Veritas ruler stop increases the usefulness 

of a metal ruler by providing a solid 

reference point. It is ideal for setting saw 

fences, repeat cuts, etc. To use, slide the 

stop over the ruler end and tighten it at the 

desired position. Repositioning is fast and 

easy. The stop’s anodised aluminium body is 

contoured to fit comfortably between thumb 

and forefinger, with raised ridges for a better 

grip. Accommodates rulers from 7/8” to 

1-1/8” wide and up to 0.05” thick. 45g. 

Order no. 

Price 

05N68-01 $21.00 

VERITAS ® 

MITRE 

SADDLE 

When working 

on small 

items such 

as picture 

frames, a 

large combination 

square 

or try square 

can often 

be cumbersome. 

Not so 

with our mitre saddle. The relatively small 

size makes it easy to use. Despite its size, 

it still has a large reference face (3-1/2” at 

the wide end) set at 45°. The leg measures 

1” wide by 2-1/4” long. As with our saddle 

squares, the sides are machined so that a 

line can be easily and accurately transferred 

around workpiece corners. The inside corner 

is relieved to ensure perfect registration, 

even on saw whiskers. Made from anodised 

aluminium. 40g. 

JAPANESE TRY SQUARE 

Made from stainless steel 

this instrument combines 

the best of both a 90° 

and 45° square. The 

base is 159mm long 

with a height of 

100mm. 210g. 

Order no. 

Price 

49N0502 $29.00 

MITRE SQUARE 

Steel blade, brass edges on both faces. 

125mm blade. 95g. 

Order no. 

Price 

CT-260505 $10.00 

CARBA-TEC ® 12” HOOK RULE 

Put an end to inaccurate measurements. 

With a hook on the end of this rule you always 

measure from the exact end of the board. 

A quick turn of the cam screw releases the 

hook for easy sliding to the side or complete 

removal. Dual marked scale for imperial or 

metric measurements. 75g. 

Order no. 

Price 

HR-1 $11.00 

Order no. 

Price 

05N56-15 $21.00 

VERITAS ® SLIDING SQUARE 

This cabinetmaker’s square is used to lay 

out or transfer measurements quickly and 

accurately-you always have an ample reference 

face against your work without having 

to flop the square. This also simplifies working 

in two axes at once (e.g., measuring in 

50mm and over 38mm), substantially reducing 

the chance of error when measuring and 

marking two dimensions. The stainless-steel 

blade is 77mm wide and 152mm long, machine 

ground on all four edges. The diamond 

cut-out in the blade holds a pencil tip in position 

and makes it easy to draw lines parallel 

to an edge. Accurate and well made. 317g. 

Order no. 

Price 

05N32-05 $49.00 

VERITAS ® SQUARE FENCE 

A carpenter’s square is frequently needed 

just because of its size. The key disadvantage 

of such a square (its lack of a supporting 

fence ledge) can now be eliminated using 

a Veritas square fence. The 8” long anodised 

aluminium extrusion can be readily attached 

to either the stock or blade of your square 

(depending upon intended use) with the two 

integral brass screws. The face of the square 

fence aligns with the edge of the workpiece 

while the weight of the framing square rests 

on the material. 250g 

Order no. 

Price 

05N54-01 $32.00 

TAPE TIP 

Used with any standard tape measure, this 

device helps you measure diagonals with 

confidence. An angled boss on the underside 

hooks securely on a corner while a 

measurement is taken. For an inside measurement, 

you simply add 1” to the measurement 

indicated on the tape measure, while 

outside measurements are direct read. To 

turn a tape measure into a compass or a 

marking gauge, use the centre hole with a 

screw or nail for laying out an arc or circle, 

or use the V-notch end to locate a pencil for 

marking straight lines. 

Order no. 

Price 

50K58-01 $8.00 



INCRA GAUGE 

Designed for multiple needs. This tool should 

be in every woodworkers’ shop. Works as 

a precision marking gauge, a freestanding 

depth-of-cut gauge, a fence alignment 

gauge and a centre finder. 

Order no. 

Price 

IN-IG32 $21.00 

INCRA CENTRING RULE 300MM 

Find the exact centre of any workpiece up to 

300mm wide. In addition to top and bottom 

micro-fine marking holes at every 1/32” it 

also has a built-in protractor with guide slots 

at every 45°, 30°, 22.5°, and 5° interval. 

Order no. 

Price 

IN-CENT300M $26.00 

INCRA PRECISION BEND RULES 

Make dual-surface layouts a snap using the 

corner slots shown above. The INCRA Bend 

Rule is precisely what you need for layout 

and measurement along the edge of a board 

or other workpiece. The 90° shape holds it 

snugly in place while the two scale surfaces 

let you mark and measure on the top, edge 

and corners simultaneously! There are even 

two vertical end scales for drawing precision 

parallel lines relative to the edge of your 

work. 


IN-BND150M 150mm $23.00 

IN-BND300M 300mm $30.00 

MECHANICAL PENCIL 

(0.5mm) 

To suit all Incra precision 

rules and layouts. The 

micro-fine guide holes on 

INCRA rules are designed 

for a perfect mark with the 

.5mm lead size in your mechanical pencil. 

This design elevates the inexpensive .5mm 

pencil into a precision marking and layout instrument. 

All of the marking holes in INCRA 

rules require the .5mm size. 

Order no. 

Price 

IN-IRPENCIL $2.50 

INCRA 6” PRECISION PROTRACTOR 

We’ve reinvented the protractor by putting 

extra long guide slots at every 45°, 30°, 22.5°, 

5°, 1° and 0.5° interval to plot any angle with 

ease and absolute accuracy. 

Order no. 

Price 

IN-PRO160M $40.00 

INCRA PROFES- 

SIONAL T-RULES 

This is the most versatile 

and precise 

rule we offer. These 

Professional T-Rules 

are also available 

in 12 inch/300mm 

lengths and both 

lengths offer Incra’s 

patented marking 

holes at every 1/16th, 

32nd, 64th &1/100th 

inch. They have marking holes at every 

.5mm as well! 


IN-TDPROT06 6”/150mm $34.00 

IN-TDPROT12 12”/300mm $45.00 

MARKING RULES METRIC 150 & 300MM 

The Metric Marking Rules are precisely 

what’s needed for accuracy. These rules 

offer marking holes at every 1/4 millimetre! 

This is unmatched in the industry of marking 

rules. 


IN-RULE150M 150mm $14.00 

IN-RULE300M 300mm $23.00 

MARKING RULES 10” DECIMAL/MM 

This is our 10” Decimal Inches and Millimetres 

Marking Rule. The perfect combination 

of traditional English and modern Metric 

measuring. This rule offers marking holes 

and slots at every 1/20th of an inch and every 

1/2 millimetre. 

Order no. 

Price 

IN-RULDM10 $23.00 

INCRA 6” X 3” PRECISION X-Y MARKER 

Locate and mark the intersecting point of 

two perpendicular lines, all in one quick easy 

step. This 6 inch by 3 inch Rule with microfine 

marking holes at every 1/16” gives you 

4,608 different exact positions instantly. 

Order no. 

Price 

IN-XY0603 $39.00 

KREG ® MULTI-MARK 

This incredibly handy multi-purpose marking 

and measuring tool, perfect for a wide variety 

of household and jobsite applications. 

Order no. 

Price 

KR-KMA2900 $25.00 

300MM BRASS EDGE WOODEN RULE 

Order no. 

Price 

19S11-02 $15.00 

BLACK ANODISED ALUMINIUM 

ADHESIVE RULE 

Ideal for table saws, router tables, custom 

made jigs and a hundred other uses. Dual 

scale metric 760mm in 1mm increments 

and imperial scale 30” in 1/16” increments. 

Order no. 

Price 

76030 $10.00 

A. 

B. 

C. 

D. 

STAINLESS STEEL RULES 


RU-300 A. 300x25mm metric $8.00 

RU-150W B. 150x18mm metric $7.00 

RU-150 C. 150x13mm metric $7.00 

D. Metric & imperial, 

150mm fitted with 

CR-6 moveable pocket clip $2.00 

which doubles as a 

depth gauge stop 


65


VERITAS ® STRAIGHTEDGES 

A straightedge is extremely useful for setting 

up machines such as planers and jointers. 

We offer two types. Both are wide enough 

to stand on edge unsupported, so you have 

both hands free to make precise adjustments. 

Our anodised aluminium straightedges 

are 1-3/4” high and 7/16” wide, and will 

not rust. The reference edge is machined flat 

to within 0.003” over the entire length. Where 

extreme accuracy is needed, our solid steel 

bar has both edges precision ground flat to 

within 0.001” over the entire length. 


05N62-00 12” steel $49.00 

05N62-01 24” steel $59.00 

05N62-03 36” steel $89.00 

05N63-03 38” aluminium $55.00 

DIGITAL ANGLE RULE 

Overall length 400mm, 200mm when folded. 

Will measure from 0° to 360° in 0.1° increments. 

Digital display can be zeroed at any 

location. A hold button to freeze your last 

reading is conveniently located near the 

readout. Their is also a mechanical lock to 

prevent further movement once the desired 

angle is reached. 3V CR2032 Lithium battery 

included. 

Order no. 

Price 

DAR-200 $35.00 

NEW 

BMI 8 & 2M TAPES 

BMI are amongst Germany’s leading manufacturers. 

TwoComp pocket measuring tapes 

are high quality with a robust rubber case 

made to withstand the rigors of on-site work. 

The easy to operate mechanism and belt 

clip make this tape a joy to use. 8m length 

with mm/cm graduations, 25mm wide blade. 

Made in Germany. 


BMI-QUICKY 2m $10.95 

BMI-472841 8m $19.95 

VERITAS ® 

PRECISION RULE 

Easily to become the 

most-used measuring 

tool in your shop. 

An ideal size for cabinet-making, 

it has the 

accuracy of an engineer’s 

square (0.001” 

per inch of length). 

All four edges are 

ground, and both faces 

are graduated on the inside and outside 

edges. Graduations are in half millimetres on 

the 8cm leg and in millimetres on the 15cm 

leg. 

Order no. 

Price 

05N35-03 $29.00 

VERNIER HEIGHT 

GAUGE 

Ideal for router and 

saw table setups, 

etc. Range is from 0 

to 180mm. 460g. 

Order no. 

Price 

HG-1 $29.00 

DIGITAL 

HEIGHT 

GAUGE 

Displays in metric, 

imperial and 

fractional imperial. 

The generously 

over-sized 

magnetic base 

gives great stability 

while the L- 

shaped contact 

provides reach 

over larger router 

bits. This tool can 

even be used to 

accurately set or re-calibrate the analogue 

scale on your saw, spindle moulder etc. Max 

height is 150mm. 

Order no. 

Price 

DHG-1 $69.00 

GROZ 

200MM 

CALIPER 

SET 

These are 

engineering quality precision instruments. 

The set includes one outside caliper, one inside 

caliper and one divider. Set is supplied 

in vinyl wallet for safekeeping. 700g. 

Order no. 

Price 

GZ-1493 $52.00 

DIGITAL ANGLE 

FINDER 

Why bother measuring 

and estimating 

angles with a hand 

gauge when you can 

use this digital tool to 

provide quick, precise 

angle readings on your tablesaw or any other 

woodworking machine! This precision tool 

provides digital readings from zero to 180° 

to within 0.1° accuracy. Secures to tool being 

measured with integral rare earth magnets. 5 

minute auto shut-off. Includes battery. 166g. 

Order no. 

Price 

AFB-15 $59.00 

HEAVY DUTY 

DIGITAL ANGLE 

FINDER 

Our latest angle finder 

that is the HD version 

of its predecessor with 

a couple of additional 

features. This unit is 

beautifully made of alloy with magnets fixed 

on both sides (instead of the bottom) of the 

screen allowing for easy fixture and reading 

in all situations. The extra large digital readout 

also has arrows that indicate which direction 

you are reading ie - left or right. Includes 

battery. 250g. 

Order no. 

Price 

AFB-LD220 $79.00 

CARBA-TEC ® 200MM DIGITAL CALIPER 

With extra large LCD readout. Reads in metric, 

imperial and fractional imperial from 0 to 

200mm. Stainless steel construction supplied 

in plastic storage case. 420g. 

Order no. 

Price 

CDK-200 $59.00 

CARBA-TEC ® 150MM DIGITAL CALIPER 

Made from durable carbon fibre with large 

digital display. Instantly converts from imperial 

to metric. Excellent value for money. 125g. 

Order no. 

Price 

PDC-730 $19.00 

DIGITAL THICKNESS GAUGE 

Capacity 0-150mm. Display can read in millimetres, 

inches and fractions of inches with 

a push of a button. This unit also features a 

very convenient hold function. 160g. 

Order no. 

Price 

ODC-150 $45.00 


Handtools & Handplanes 

JAPANESE NOMI (CHISELS) 

HAMLET BEVEL EDGE CHISEL SET 

These bevel edge chisels are beautifully 

balanced and are well suited for fine joinery 

and general cabinetmaking. Overall length: 

270mm, blade widths: 6, 13, 19 and 25mm. 


Order no. 

Price 

HCT-011 $129.00 

IRWIN MARPLES PROFESSIONAL 

CHISEL SET 

Hand forged and fitted with special handles, 

which are guaranteed split proof for life, 

this set has 6 chisels, 6mm, 10mm, 13mm, 

19mm, 25mm and 32mm. They all come in a 

wooden presentation box. 2kg. 

Order no. 

Price 

IRW-10501697 $159.00 

CARPENTER’S CHISELS. 


MBE-6 6mm $23.00 

MBE-9 9mm $25.00 

MBE-12 12mm $25.00 

MBE-15 15mm $26.00 

MBE-19 19mm $28.00 

MBE-22 22mm $29.00 

MBE-25 25mm $29.00 

MBE-32 32mm $31.00 

MBE-38 38mm $33.00 

MBE-SET Set of 9 $229.00 

HAMLET MORTISE CHISELS 

Thicker and stronger than a normal chisel to 

take the punishment inherent with mortising. 

Leather washers absorb heavy blows. 


HCT-033 1/4” $49.00 

HCT-035 3/8” $49.00 

HCT-036 1/2” $49.00 

HCT-038 3/4” $55.00 

HCT-040 1” $65.00 

HSS CORNER CHISEL 

Ideal for cleaning of 

mortise corners, hinge 

rebates, lock recesses, 

etc. Blade is 10mm x 

10mm. 160g. 

Order no. 

Price 

CC-01 $45.00 

A. 

B. 

A. CHU-USU-NOMI 

BEVEL EDGE CHISEL/OAK 


JBC-03 3mm, 110g $81.00 

JBC-06 6mm, 120g $81.00 

JBC-09 9mm, 150g $83.00 

JBC-12 12mm, 100g $86.00 

JBC-18 18mm, 290g $95.00 

JBC-24 24mm, 290g $104.00 

JBC-30 30mm, 330g $110.00 

JBC-36 36mm, 350g $129.00 

B. OIRE NOMI 

BUTT CHISELS/OAK 


C-5203 3mm, 90g $41.00 

C-5206 6mm, 90g $41.00 

C-5209 9mm, 90g $41.00 

C-5212 12mm, 100g $44.00 

C-5215 15mm, 120g $44.00 

C-5218 18mm, 130g $44.00 

C-5221 21mm, 140g $48.00 

C-5224 24mm, 150g $50.00 

C-5230 30mm, 170g $52.00 

C-5236 36mm, 200g $69.00 

C-5242 42mm, 220g $69.00 

C. UMEKI-NOMI 

DOVETAIL CHISELS/ OAK 


JDC-03 3mm, 120g $67.00 

JDC-06 6mm, 130g $73.00 

JDC-09 9mm, 150g $79.00 

JDC-12 12mm, 170g $79.00 

JDC-15 15mm, 200g $79.00 

JDC-18 18mm, 210g $91.00 

C. 

PFEIL SWISS MADE BEVEL EDGE 

CHISEL SET 

This quality set is supplied with hornbeam 

handles and presented in a European beech 

case. All chisels are made to the same high 

standard as Pfeil carving tools. Chisels are 

sharp out of the box but may need final honing 

depending on your preference. Kit includes: 

6, 10, 12, 16, 20 and 26mm chisels. 

Order no. 

Price 

PF-BC-6 $236.00 

JAPANESE 6 PIECE ECONOMY 

CHISEL SET 

Handles are turned from Japanese red oak. 

Each of the chisels is hollow ground on the 

back to facilitate maintenance of a flat surface 

when sharpening. All chisels are made 

of laminated steel. Sizes include 6, 9, 12, 

18, 24 and 30mm. Overall length of each is 

approximately 220mm. 

Order no. 

Price 

JCS-6 $329.00 

PFEIL BUTT 

CHISEL SET 

These butt chisels 

from Pfeil are a 

pleasure to use. They 

feature comfortably 

faceted and 

contoured European 

Locust handles 

and blades made 

of Swiss alloy tool 

steel that is heat treated using 

the latest technology for excellent edge 

holding. Overall length of each chisel is 6”, 

blade length of each is 3-3/8”. 

Order no. 

Price 

PF-SBC-4 $133.00 


67


PFEIL CABINET 

MAKERS 

CHISELS 

Blades are 

forged from K 

510 steel, hardened 

to 60 Rc. 

Handles made 

of strong, oiled 

elm wood from Switzerland. Set includes 

six carpenters chisels in a rugged canvas 

roll. Widths included: 6, 10, 12, 16, 20 and 

26mm. 

Order no. 

Price 

PF-CM-SET-6 $229.00 

A. 

B. 

C. 

E. 

G. I. 

F. J. 

H. 

L. 

D. 

KUNZ VENEERING HAMMER 

This traditional veneer hammer 

features a half round 3-5/8” wide 

edge. This perfectly smooth edge 

is important for squeegeeing the veneer 

down and for smoothing out any glue 

bumps. (L) 279mm, (W) 88.9m. 520g. Made 

in Germany by KUNZ. 

Order no. 

Price 

KU-104 $67.00 


A. CT-260420 Wooden Carpenter’s Mallet $27.00 

B. JH-115 

$41.00 

Hammers with 1 flat end & one round end 

C. JH-225 $47.00 

D. JHW-48 48mm Traditional Japanese Wooden Mallet $25.00 

E. PF-HK70 HornBeam Carver’s Mallet L:280mm Dia:70mm $61.00 

F. PF-HK80 HornBeam Carver’s Mallet L:280mm Dia:80mm $82.00 

G. PF-HK90 Hornbeam Carver’s Mallet L:280mm Dia:90mm $92.00 

H. PF-HK110 Hornbeam Carver’s Mallet L:280mm Dia:110mm $102.00 

I. PF-BM-500 Pfeil Brass Mallet L:200mm, Dia: 47mm $92.00 

J. PF-BM-800 Pfeil Brass Mallet L:220mm, Dia: 49mm $102.00 

K. 05E15-01 Veritas Cabinetmakers Mallet $49.00 

L. JHE-300 Economy Japanese Hammer $20.00 

M. PU-038 Deadblow Hammers $19.00 

N. PU-050 Deadblow Hammers $29.00 

A. B. C. D. E. F. 

PFEIL ADZE, HATCHETS & AXES 

These tools are forged from high quality steel, then hardened and sharpened. 

Order no. Description Length Blade Width Price 

A. PF-AXE Pfeil Axe 450mm long - $140.00 

B. PF-HAT-S Pfeil Sculptor’s Hatchet 280mm 80mm $164.00 

C. PF-ADZE-S Pfeil Curved Adze -Small 280mm 50mm $140.00 

D. PF-ADZE-F Pfeil Flat Adze 450mm - $140.00 

E. PF-ADZE-K Pfeil Straight Adze - Small 280mm 50mm $140.00 

F. PF-ADZE-R Pfeil Round Adze 450mm 70mm $133.00 

K. 

M. 

N. 

JAPANESE NAIL PULLERS 

Both feature a standard paw tip, the JNP-200 

has a wafer-thin pry tip for easing apart cabinets 

in repair work without marring the wood, 

the JNP-270 miniature crowbar has a straight 

end. Until you have used these tools, it is difficult 

to appreciate their versatility. Removing 

moulding, separating mitre joints in frames 

and easing off paint seized hardware are just 

a few applications. JNP-200 shown. 


JNP-200 200mm, $31.00 

JNP-270 270mm, $29.00 

SWIVEL HEAD NAIL PULLER 

Features adjustable foot, lockable 

at 5 angles (80°, 105°, 130°, 155° 

and 180°). The swivel 

head is easily adjusted 

by way of a springloaded 

thumb lever. 

An excellent 

addition to any toolbox. Specifications: 

400mm long, 700g, rated to 150kg. Solid 

steel construction with polypropylene handle. 

Order no. 

Price 

NP-55011 $27.00 

TRADITIONAL JAPANESE KITCHEN 

KNIVES 

These functional knives are available in five 

different sizes and serve many functions in 

the kitchen. Made from high carbon steel 

which keeps a far better edge than stainless 

steel. When handles give a traditional 

presentation, these knives will provide years 

of service. These knives will rust - not dishwasher 

safe. Listed from left to right. 


Fruit & Small fish knife, 

A. 60343 264mm $33.00 

Fish & Fish bone knife, 

B. 60014 289mm $49.00 

C. 60252 Vegetable Knife, 300mm $39.00 

Heavy Vegetable Knife, 

D. 60242 298mm $39.00 

Sushi & Meat Knife, 

E. 60022 330mm $42.00 


HONING GUIDE FOR KITCHEN KNIVES 

This clever but simple device rigidly holds 

your knife at the same repeatable angle ensuring 

perfect honing every time. Stone & 

knife not incl. 

Order no. 

Price 

KS-36004 $19.00 

GROZ COPING 

SAW 

Throat depth: 

120mm, supplied 

with one 

standard 6” pinned 

blade. 


GZ-30220 Saw $13.00 

GZ-CSBLADE Repl. Blade, 14tpi, 10 pk. $8.00 

CARBA-TEC ® JEWELLERS SAW 

Order no. 

Price 

CT-190022 $27.00 

8” & 12” TENON SAWS 

8”- tooth pitch 1.25mm, blade length 200mm, 

kerf 0.9mm. Max. depth of cut 55mm. 12” - 

tooth pitch 1.8mm, blade length 300mm, kerf 

1mm. Max. depth of cut 77mm. 


PAX-D8 8” (shown) $167.00 

PAX-T12 12” (not shown) $167.00 

PAX 8” GENTS SAW 

Beautifully made but inexpensive saw suitable 

for dovetailing or trimming. Tooth pitch 

1.25mm, blade length 200mm, kerf 0.9mm. 

Max depth of cut 45mm. 

Order no. 

Price 

PAX-G8 $48.00 

PAX GUITAR FRET SAW 

17tpi, 250mm blade length. Kerf 0.53mm. 

Order no. 

Price 

PAX-GS1 $56.00 


NAKAYA GOLD SERIES PROFESSIONAL NOKOGIRI SAWS 

A. DOZUKI FINE PRECISION SAW 

Blade length: 150mm, Blade thickness: 0.2mm, 

kerf: 0.28mm, Max. depth of cut: 41mm, 30tpi. 


WDG-150 Complete Saw $49.00 

WDGB-150 Repl. Blade $26.00 

B. DOZUKI FINE PRECISION SAW 






C. DOZUKI FINE PRECISION SAW 






D. KUGIHIKI FLUSH CUT SAW 

Blade length: 180mm, Blade thickness: 

0.2mm, Kerf: 0.2mm. 


KDG-180 Complete Saw $50.00 

KDGB-180 Repl. Blade $29.00 

E. RYOBA SAW 


0.5mm, Kerf: 1mm. 


WRG-240 Complete Saw $76.00 

WRGB-240 Repl. Blade $37.00 

F. RYOBA CROSSCUT SAW 

Kerf: 1mm. 10tpi on one side, the other graduates 

from 4tpi to 8tpi. 


WRG-270 Complete Saw $85.00 

WRGB-270 Repl. Blade $41.00 

TRADESMAN QUALITY JAPANESE SAWS 

A. CROSSCUT FLEXIBLE CARPENTERS 

Blade length 300mm, kerf 1.15mm, blade 

thickness 0.7mm, t.p.i. 12. 250g. 


A. 

Z-15011 Complete Saw $52.00 

Z-15012 Repl. Blade $27.00 

B. CROSSCUT FLEXIBLE CARPENTERS 


B. 

thickness 0.50mm 18tpi. 190g. 



Z-15007 Repl. Blade $25.00 

C. 

C. FINE TOOTH JOINERY SAW 


thickness 0.30mm, t.p.i. 25. Very fine cut 

saw for dovetailing and other extremely precise 

D. 

accurate cuts. 

210g. 



Z-7030 Repl. Blade $30.00 

D. PLUNGE CUT PANEL SAW 





Z-7027 Repl. Blade $25.00 

A. 

B. 

C. 

D. 

E. F. 

G. 

G. KATABA SAWS 


0.5mm, Kerf: 0.8mm, 18tpi. 


WKG-250M Complete Saw $56.00 

WKGB-250M Repl. Blade $29.00 


0.6mm, Kerf: 1.0mm, 13tpi. 


WKG-270M Complete Saw $57.00 

WKGB-270M Repl. Blade $29.00 

E. 

E. GENERAL PURPOSE SAW 





Z-7011 Repl. Blade $19.00 


69


VERITAS ® FLUSH 

CUTTING SAW 

Can be used anywhere 

that you want to cut off a 

projection without damaging 

the adjoining face. 

Order no. 

Price 

05K34-01 $26.00 

FLUSH CUTTING FLEXIBLE PULL 

SAW 

Features include: two sided replaceable 

blade, zero set on teeth for fast clean flush 

trimming of plugs, dowels, etc without damage 

to surrounding surface. Specifications: 

Blade Length: 150mm, Thickness: 0.40mm, 

Kerf: 0.40mm, Pitch: 21 tpi & 17 tpi, Impulse 

hardened, tri-edged teeth. Nickel plated for 

rust inhibition. 80g. 

Order no. 

Price 

Z-150D $29.00 

VERITAS ® MAGNETIC 

SAW GUIDES 

These saw guides are 

manufactured using precision-machined 

aluminium 

extrusion. Each reference 

surface has an embedded 

3/4” rare-earth magnet 

and is covered with a lowfriction 

UHMW pad. The magnets keep the saw aligned as you cut; 

the pads allow the saw to slide easily against the reference surface. 

The clamp can accommodate material from 1/4” to 1” thick. The 

guides can be used with any backless saw that has approximately 

0.005” or less of tooth set. 

Our dovetail saw is a suitable 

companion. With a 2” 

x 8-1/2”, 22 tpi blade, the 

dozuki tooth form is effective 

in both crosscuts and 

rip cuts. 

MERLIN ECO-10 MOISTURE 

METER 

Maximum scanning depth is 20mm, 

minimum board thickness is 10mm. 

Moisture measurement range: 6% to 

30%. 170g. Made in Austria. 

Order no. 

Price 

MER-ECO-10 $399.00 


05T02-01 1:6 Ratio $62.00 

05T02-02 1:8 Ratio $62.00 

05T02-05 14° Guide $62.00 

05T04-01 90° Guide $59.00 

05T02-03 Dovetail Saw $29.00 

MOISTURE METER WITH LCD 

DISPLAY 

This meter works using the electrical resistance 

principle and is ideal for comparative 

moisture readings on common 

timber species and building materials. 

Range of 6 to 44% to an accuracy of 2% 

in timber. Building materials such as wall 

board, drywall, plaster, mortar and concrete 

can also be measured to 0.05% 

from 0.20% to 2.0%. 127mm long. 130g. 

Order no. 

Price 

CT-EM4807 $69.00 

VERITAS ® PREMIUM CROSSCUT SAWS 

Filed with alternating bevel angles that sever rather than tear wood 

fibres for clean cuts in cross-grain applications, our crosscut saw has 

16 teeth per inch. The teeth have 15° rake and bevel angles. 

VERITAS ® PREMIUM DOVETAIL SAWS 

Features rip-cut teeth that have a rake angle of 14° and an included 

angle of 60°. The 14 tpi dovetail is most efficient with stock thicker 

than 1/2”, while the 20 tpi version is best for stock under 1/2” thick. 

VERITAS ® RIP & CROSSCUT CARCASS SAWS 

Typically used to cut joints in drawer runners, dividers, and stretchers. 

The 12 tpi rip saw has a 10° rake angle and an included angle of 

60°. The 14 tpi crosscut saw has a rake angle of 15° and an included 

angle of 60°. 

VERITAS ® GENT’S SAWS 

Intended for those who wanted good-quality tools for occasional 

work. Our Gent’s saws have a 200mm long high-carbon blade that is 

just 0.015” thick with 0.003” of teeth set per side. The 20 tpi rip saw 

has a 14° rake angle and a 60° included angle. The teeth on the 22tpi 

saw have 15° rake and bevel angles and an included angle of 60°. 

Both saws have a cut depth of 40mm. 


05T06-01 Veritas Premium Crosscut Saw $79.00 

05T05-05 Veritas Premium Dovetail Saw 20tpi $79.00 

05T05-01 Veritas Premium Dovetail Saw 14tpi $79.00 

05T07-05 Veritas Rip Carcass Saw 12 tpi $79.00 

05T07-01 Veritas Crosscut Carcass Saw 14 tpi $79.00 

05T10-01 Veritas Gent’s Saw (Rip) 20tpi $85.00 

05T10-05 Veritas Gent’s Saw (Crosscut) 22tpi $85.00 

MERLIN WS13HD MOISTURE 

METER 

Maximum scanning depth is 20mm, 

minimum board thickness is 1.3mm. 

Moisture measurement range: 4% to 

20% with high accuracy, up to 40% 

with lesser accuracy. This instrument is 

made especially for harder denser timbers. 

180g. Made in Austria. 

Order no. 

Price 

MER-WS13/HD $579.00 

MERLIN 2-IN-1 PIN TYPE POCKET 

MOISTURE METER 

Single range moisture meter 5% to 50% 

in wood products and 1.5% to 33% in 

building materials such as brick or plaster. 

Working on the electrical resistance 

principle this instrument is ideal for 

comparative moisture readings on most 

common wood species. 75g. Made in 

Austria. 

Order no. 

Price 

MER-MOISTEC $159.00 



RIVER CITY TOOLS ® 

MULTIFUNCTION TOOL 

Our Multi-Tool features the following: pliers, 

wire cutters, 5 flat various size screwdrivers, 

4 Phillips screwdrivers, 5 Allen keys, 1 socket, 

small knife, large knife, file, fish-scaler, hook 

remover, bottle opener/can opener. 460g. 

Order no. 

Price 

LMT-1 $26.00 

BOX CUTTER UTILITY KNIFE 

Fitted with two blades, one a 

utility blade, the other is 

a box cutter with replaceable 

Stanley style blade. Also 

comes complete with 

a stainless steel belt 

hook. 230g. 

Order no. 

Price 

UKB-2B $13.00 

CLASSIC AUTOLOADER 

Sick and tired of never having the right 

screwdriver handy? The Autoloader can 

be loaded with any 6 bits YOU want. Once 

loaded, changing between bits is as simple 

as pulling the handle back, selecting the desired 

bit and pushing the handle forward. 

Made in Canada. 195g. 

Order no. 

Price 

AL-CLASSIC $29.00 

GROZ LEATHER PUNCH 

Professional quality pliers, each punch locates 

exactly in position locking in place with 

the prawl and ratchet mechanism. Spring 

loaded revolving head incorporates 6 punches 

of sizes; 2 mm, 2.5 mm, 3 mm, 3.5 mm, 4 

mm & 4.5 mm. 280g. 

Order no. 

Price 

GZ-31600 $20.00 

POCKETWRENCH II TM . 

This is the next best 

thing to a real 

wrench! Stainless 

steel, 1/8” 

thick, 4” long, 

and 1” wide – perfect for a pocket or tool 

pouch. It will tighten or remove nuts from 3/16” 

to 11/16” or 5mm to 17mm. Made in USA. 

Order no. 

Price 

25K17-01 $16.00 

CHINESE SCISSORS (SET OF 4) 

This style of scissors has been made for over 

300 years in China. Hand forged, they have 

a hard steel layer, laminated to a softer iron 

backing that supports the more brittle hardened 

layer. They come razor sharp. Their 

blade strength and sharpness make them 

useful in the shop, the garden or the kitchen, 

or for crafts. Overall lengths are 140 to 

216mm. An excellent buy in traditional tools. 

Order no. 

Price 

45K10-10 $15.00 

PRO SEAM 

RIPPER KIT 

The Pro kit includes 

two sharpend 

stitchpicker 

blades 

for starting a 

seam, and four safe-tip rippers 

that complete the job without snagging 

the fabric. Suitable for anyone who does 

sewing or handy crafts. Made in Canada. 

Order no. 

Price 

09A01-20 $19.00 

VENEER ROLLER 

A heavy duty, high quality veneer 

roller. A cranked-neck solid steel 

shaft allows you to apply heavy 

pressure while keeping your 

hands free of the workpiece. Overall length: 

350mm with a 100mm deep offset crank 

shaft. 

Order no. 

Price 

CT-ROLLER $25.00 

VERITAS ® CORNERING TOOL 

Cut a fixed radius curve on an edge. Our cornering 

tools have a different radius cutter at 

each end. One cuts a 1/16” and a 1/8” radius 

and the other cuts 

a 3/16” and 1/4” 

radius. Set comes 

with a sharpening 

system which includes 

four different 

cutting radii, 

silicon carbide paper, 

and a holding 

wedge. 150g. 

Order no. 

Price 

05K50-30 $46.00 

VERITAS ® BEADING TOOL 

Hand beading, fluting or reeding in hard or 

soft woods is an easy matter with the new 

VERITAS ® beading tool. Using standard cutters 

or one that you custom shape, you can 

put fine detail in furniture quickly and accurately. 

The fence has two mounting locations 

to provide up to a 1” (25.4mm) blade offset 

and is positional to expose one of three 

bearing surfaces: flat for straight and convex 

applications, curved for slightly concave 

and waved edges, and bullnose for more 

complex profiles. The handles are African 

rosewood with brass fittings. Supplied with 

a 3/32” radius single-point cutter and five 

blank cutters. 


05P04-50 Beading Tool $95.00 

Optional Cutters 

05P04-02 Single Point Cutter $7.00 

05P04-03 Bead Cutters (3) $15.00 

05P04-04 Flute Cutters (3) $15.00 

05P04-05 Reed Cutters (2) $14.00 

05P04-06 Blank Cutter (1) $4.00 

VERITAS ® MAGNETIC 

CORNER CHISEL. Designed 

for squaring off the 

corners of routed hinge 

gains. The 3/8” square 

blade is precision ground 

made of long-wearing 

A2 tool steel, hardened 

to Rc60. Two embedded 

rare-earth magnets hold 

the chisel squarely in 

place. A tap on the chisel 

cuts the corner square 

and flush with the routed edges. 300g. 

Order no. 

Price 

50S01-01 $49.00 

CAMELLIA OIL 

Used for generations as an effective 

rust inhibitor for all tools. Just 

apply a tiny amount with a rag. 

240ml (100g). 

Order no. 

Price 

CAM-1 $24.00 


71


WOODWORKERS STARTER SET IN 

WOODEN BOX 

Set includes No. 4 (250mm) smoothing 

plane, low angle (175mm) block plane, 

160mm bevel, 210mm brass inlaid mortise 

gauge and 280mm brass edged try square. 

Perfect for every beginner. Presented in 

wooden storage case. 4.6kg. 

Order no. 

Price 

CT-290115 $159.00 

GROZ BLOCK 

PLANES 

Cast Iron 

body and 

lever cap 

for durability. Both 

planes have lateral 

adjustment levers. Ground bases for 

accuracy in use. Planes require final tuning 

before use. The 220N has a 178mm overall 

length, 41mm cutter idth and 21° blade angle. 

The 605N has a 157mm overall length, 

35mm cutter width and 13° blade angle. 

Order no. 

Price 

GZ-220N $52.00 

GZ-605N $52.00 

GROZ #4 & 5 SMOOTHING PLANES 

Fully ground soles and 

sides, hardwood handles, 

ductile cast iron 

construction and tool 

steel blades. Planes require 

final tuning 

before use. #4 

has a 245mm 

overall length, 

62mm sole width and 50mm blade 

width. The #5 has 355mm overall length, 

62mm sole width and 50mm blade width. 


GZ-39701 #4 Bench Plane $52.00 

GZ-39702 #5 Bench Plane $73.00 

GROZ #7 

JOINTING 

PLANE 

Fitted with hardwood handles 

and brass knobs. 75mm wide x 560mm 

long. 4.2kg. Plane requires final tuning before 

use. 

Order no. 

Price 

GZ-39704 $132.00 

A. B. 

LEE VALLEY PALM PLANES 

These little beauties are made in Canada 

and are expertly cast and ground. The ‘Squirrel 

Tail’ planes (A and B) are similar to the 

old Stanley #100 and #100-1/2. ‘A’ is a flat 

plane while ‘B’ is curved with a 1-1/2” radius 

side to side and a 12” radius front to back. 

These two are 3-3/8” wide with a 1” blade - a 

true pocket plane! 


A 15P10-10 Flat ‘Squirrel Tail’ Block Plane $57.00 

15P01-02 Repl. Flat Blade $15.00 

B 15P01-01 Flat ‘Little Victor’ Block Plane $53.00 

15P01-02 Repl. ‘Little Victor’ Blade $15.00 

C 15P10-20 Curved ‘Squirrel Tail’ Block Plane $63.00 

15P10-21 Repl. Curved Blade $22.00 

A. B. 

A. KUNZ CAST IRON POCKET PLANE 

B. KUNZ BEAVER TAIL POCKET 

PLANE Plane length 85mm and cutter 

width 24mm for both. 

Order no. 

Price 

A KU-101 $30.00 

B KU-100 $30.00 

VERITAS ® FLUSH PLANE 

This plane is ideal for flush trimming of projections 

such as glue lines, laminate edges, 

plugs, etc. 

Order no. 

Price 

05P20-01 $49.00 

VERITAS ® 

LOW-ANGLE 

SMOOTHING 

PLANE 

A low-angle 

s m o o t h i n g 

plane has three 

key uses. It is 

used to smooth large surfaces, preferably 

taking a diagonal cut, partly across and 

partly along the grain. With its generous side 

wings, it is ideal for shooting mitres. Finally, 

it is excellent for end grain work of any kind. 

Order no. 

Price 

05P25-01 $279.00 

C. 

VERITAS ® BULL- 

NOSE PLANE 

This tool is two planes 

in one, serving as either 

a bullnose or a chisel 

plane. An adjustable 

set screw in the toe acts 

as a stop to accurately 

set the mouth opening. 

Order no. 

Price 

05P42-01 $199.00 

VERITAS ® SMALL 

SHOULDER 

PLANE 

Designed to seat 

nicely in the hand, our 

small shoulder plane 

is easily controlled 

using a one-handed 

grip. A 1/2” wide x 

6-1/4” long ductile 

cast iron body is accurately 

machined flat and square. 

VERITAS ® MEDIUM SHOULDER PLANE 

A versatile tool, our medium shoulder plane 

can be used on end grain. The 11/16” wide 

x 7” long body makes it ideal for rebate and 

dado work. 

VERITAS ® LARGE SHOULDER PLANE 

1-1/4” wide x 8-1/2” long and mass that bring 

both authority and precision to larger work. 


05P47-01 Sm. Shoulder Plane $209.00 

05P41-01 Med. Shoulder Plane $219.00 

05P43-01 Lg. Shoulder Plane $259.00 

VERITAS ® SMALL BEVEL-UP BENCH 

PLANE 

With a size comparable to a #3 bench plane, 

this low-angle smoother is 228mm long, 

58mm wide and weighs only 1.25kg. The 

machined and surface ground ductile cast 

iron body has a 12° bed angle and a moveable 

toe fully enclosed by the body casting. 

The locking front knob controls the toe to set 

the mouth opening. 

Order no. 

Price 

05P39-01 $299.00 

VERITAS ® SKEW RABBET PLANE 

Also known as a moving fillister, this rabbeting 

plane cuts quickly and quietly, avoiding 

the set-up, noise and dust associated with 

power tools. 

Order no. 

Price 

05P45-01 $309.00 



F. 

G. 

A. 

B. 

C. D. E. 

A. VERITAS ® LOW ANGLE JACK 

The Veritas low-angle jack plane is an exceptionally 

versatile plane. It excels at end-grain 

work, is great for shooting, and also works 

well for smoothing. 

Order no. 

Price 

05P34-01 

$319.00 

B. VERITAS ® BEVEL-UP JOINTER 

The Veritas low-angle jointer is the latest and 

largest member of our bevel-up bench plane 

family. The bevel-up blade configuration results 

in a plane that is versatile and straightforward 

to use. An adjustable throat plate allows 

a wide range of mouth adjustment. 

Order no. 

05P37-01 

Price 

$379.00 

See website for Replacement Blades 

C. VERITAS ® BEVEL-UP SMOOTHER 

We have combined the generous width and 

weight of a dedicated smoother with the versatile 

inner workings of a low-angle bevel-up 

plane. 

Order no. 

Price 

05P36-01 

$299.00 

D. VERITAS ® #4 SMOOTHER 

The #4 smooth plane is the most commonly 

used bench plane. It is the ideal size for general 

smoothing and finish work. 

Order no. 

05P26-01 

E. VERITAS ® #4-1/2 SMOOTHER 

An excellent plane for the final smoothing os 

a surface already worked by other planes or 

a thickness planer. 

Order no. 

05P23-01 

Price 

$299.00 

Price 

$299.00 

F. VERITAS ® #5-1/4 BENCH PLANE 

Our #5-1/4W differs from the original in 

many ways, mainly, ours has a wider blade 

and the mouth is 4-3/8” behind the nose. For 

better accuracy, an extra-long sole in front of 

the blade makes it easier to keep the sole 

flush to the wood, when starting a cut. 

Order no. 

05P24-01 

G. VERITAS ® #6 FORE PLANE 

One of our largest bench planes, the #6 fore 

plane is ideal for smoothing and flattening 

large surfaces, such as panels, table tops 

and workbench tops. The long sole ensures 

accuracy. 

Order no. 

05P28-01 

Price 

$299.00 

Price 

$319.00 

A. 

B. 

12° bed angle 

VERITAS ® STANDARD AND LOW 

ANGLE BLOCK PLANES 

These block planes stand apart from the 

rest. The tall side wings are ideal for shooting, 

and finger grips in the sides improve 

control. The combined blade advance and 

lateral adjust is the most sensitive, accurate 

adjustment mechanism available. Two 

guide screws prevent blade shifting. Both 

planes are machined to exacting standards, 

with milled sides and sole that are surface 

ground to a fine finish. 


05P22-30 Standard $189.00 

05P22-01 Low Angle $189.00 

C. 

VERITAS ® SKEW BLOCK PLANE 

This plane excels at trimming rabbets, working 

end grain, or making final jointing cuts 

on boards. The blade is skewed at a 15° angle, 

which makes cutting easier, either with 

or across the grain, and helps pull the fence 

tight against the work. Available in left and 

right hand models. 


A. 05P76-01 RH Skew Block Plane $249.00 

05P76-02 RH Repl. Blade $35.00 

B. 05P77-01 LH Skew Block Plane $249.00 

05P77-02 LH Repl. Blade $35.00 

C. 05P76-62 Opt. Fence Rod $8.00 

VERITAS ® APRON PLANE 

This small, low angle block plane is ideal for 

trim carpentry. It is half the weight of a standard 

block plane, a big plus if you carry it in an 

apron all day. Comes with a lapped 25° bevel 

blade made of A2 tool steel. A split-leather 

holster with brass fittings is sold separately. It 

keeps your apron plane close at hand while 

working and protects it from damage. 


05P27-02 Apron Plane A2 $129.00 

67K73-16 Leather Holster $29.00 

VERITAS ® BLOCK PLANES 

Made to exacting standards and features newly refined stainless-steel hardware. 

178mm x 44.5mm. 12° Bed angle. A. 


A. 05P70-01 DX60, Made from ductile iron $239.00 

B. 05P70-11 NX60, Made from corrosion resistant ductile iron $399.00 

B. 


73


VERITAS ® DETAIL RABBET PLANES 

These slender pocket-size planes allow fine, 

controlled cuts in areas you could ordinarily 

trim only with a chisel. With very narrow 

soles, they are also useful for cleaning dados 

or grooves. Available in five widths: 1/4”, 

5/16” (8mm), 3/8”, 6mm and 10mm. 


05P75-03 1/4” Imperial $79.00 

05P75-06 5/16” Imperial $79.00 

05P75-08 3/8” Imperial $79.00 

05P75-01 6mm Metric $79.00 

05P75-10 10mm Metric $79.00 

VERITAS ® IRON EDGE TRIMMING 

PLANE 

Edge-trimming planes work end grain or 

give final trimming cuts on jointed boards, 

for smooth edges exactly 90° to the face. 

This plane is cast in durable ductile iron for 

everyday use, and is available in right and 

left-hand models. 

Order no. 

Price 

05P03-01 $139.00 

B. 

VERITAS ® ROUTER PLANE 

With a ductile cast iron body accurately machined 

and ground flat to our high standards, 

the Veritas router plane is ideal for cutting 

dadoes and grooves, for inlay or intarsia 

work, or for cleaning out areas to a precise 

depth. Blade depth is set by a fine screw 

feed, and a positive locking depth stop sets 

depth of cut. A spring-loaded collar holds 

the blade, allowing easy blade adjustment 

and removal. 

Order no. 

Price 

A. 05P38-01 $209.00 

A & B 05P38-20 $229.00 

A. 

VERITAS ® SCRAPING PLANE 

This is the ideal tool for final smoothing, especially 

when you have to deal with highly 

figured wood or reversing grain. Tearout is 

virtually eliminated with the cutting action 

of the included scraping blade. Blades are 

2-7/8” wide and are hardened to Rc48-51. 

The sole of the plane is surface ground for 

accuracy. 

Order no. 

Price 

05P29-01 $239.00 

A. 

C. 

VERITAS ® SMALL SCRAPING PLANE 

Designed for one handed use, this small 

scraping plane has an articulated arm rest 

for a comfortable grip. The 2” wide, 0.040” 

thick, high carbon steel blade occupies the 

full width of the plane body permitting clean, 

accurate cutting. 

Order no. 

Price 

05P29-50 $159.00 

VERITAS ® SMALL ROUTER PLANE 

A versatile tool for fine work, particularly on 

narrow material or confined areas, this plane 

excels at work requiring small recesses, 

grooves or dados. The comfortable, accurately 

machined ductile cast iron body has a 

lapped sole for accuracy. 

Order no. 

Price 

05P38-50 $65.00 

B. 

D. 

VERITAS ® DETAIL PALM PLANES 

With a height-adjustable palm rest for better 

in-hand registration, these miniature planes 

are easily manoeuvred and permit fine, controlled 

cuts. The investment-cast steel body 

has a 45° bed angle and a fixed mouth, and 

uses a brass retention screw to secure the 

included 30° bevel A2 blade (0.06” thick by 

9.5mm wide). The soles are approximately 

38mm long by 15mm wide. 


05P90-01 A. Flat $72.00 

05P90-05 B. Double Convex $72.00 

05P90-09 C. Convex $72.00 

05P90-13 D. Concave $72.00 

IBEX VIOLIN MAKER’S PLANES 

Featuring curved bottoms, precision cast 

in silicone bronze. Body lengths of 25mm, 

30mm, 46mm with blade widths of 8mm, 

10mm, 12mm and 18mm respectively. 


50501 25mm, round base $83.00 

50502 30mm, round base $83.00 

50503 36mm, round base $90.00 

50553 36mm, flat base $94.00 

50504 46mm, round base $100.00 

50505 60mm, round base $121.00 

VERITAS ® PLANE SACKS 

Made from a silicone-treated knit cotton that 

resists moisture, these sacks are ideal for 

plane storage. Sacks are blade in colour with 

the VERITAS ® logo printed on them. 


05P61-07 7-1/2” $13.00 

05P61-12 12-1/2” $14.00 

05P61-16 16” $15.00 

05P61-25 25” $16.00 


VERITAS ® CABINET 

SCRAPER 

Used in place of a much 

heavier belt sander, it can 

clean a dirty workbench 

top, remove dried glue an 

smooth a panel or tricky 

grain table top efficiently, 

leaving behind a surface free of tear-out, 

digs or gouges. The blade is 2-3/4” wide 

with both edges ground at 45° so that the 

tool has two cutting edges prepared at once. 

The sole is surface ground for accuracy. 

Order no. 

Price 

05P32-05 $85.00 

VERITAS ® SUPER HARD SCRAPER SET 

Most scrapers are sheared from spring steel, 

hardened to Rc38-42. These scrapers are 

harder - Rc48-52 - and hold an edge longer. 

They are also fully milled to a square, sharp 

90° ready for immediate use on fine work. 

Two are 2” x 6”, two are 2-3/8” x 6”. 

Order no. 

Price 

05K30-10 $22.00 


VERITAS ® VARIABLE 

BURNISHER 

Woodworkers have difficulty 

putting the optimum 

hook on a scraper 

for the job at hand. 

Our Variable Burnisher 

solves the problem and makes burnishing 

easy. The unit has a carbide rod in a brass 

hub at an angle. A dial on the face of the 

body lets you set any angle from 0° to 15°. 

220g. 

Order no. 

Price 

05K37-01 $48.00 

VERITAS ® CARBIDE BURNISHER 

We made this carbide burnisher specifically 

for curved scrapers and fine detail scrapers. 

The 1/8” diameter polished carbide rod 

projects 3/4” from the hardwood handle, 

ideal for one-handed use. 100g. 

Order no. 

Price 

05K20-30 $10.00 

VERITAS ® TRI-BURNISHER 

Designed to perform the functions of round, 

triangular, and oval burnishers, this one has 

a mirror finish to guarantee smooth hooks on 

scrapers. The unique shape lets you apply 

the right amount of pressure at each stage 

of the process. Hardened to Rc 62 - 64, the 

burnisher is much harder than the scrapers it 

is used on. 120g. 

Order no. 

Price 

05K32-01 $46.00 

VERITAS ® SCRAPER HOLDER 

Scraper bow is adjusted by the centre brass 

knob. Takes the fatigue out of using straight 

scrapers. Suitable for push or pull action. 6” 

Scraper included. 250g. 

Order no. 

Price 

05K33-01 $49.00 

VERITAS ® SUPER HARD CURVED 

SCRAPERS 

These three piece scraper sets cover a variety 

of scraping jobs. The concave/convex 

ends are excellent for bowl or spindle work 

while the flat is for general purpose jobs. Two 

thicknesses are available: 0.6mm for regular 

scraping, 0.4mm for finer work. 


05K20-10 0.6 thick $19.00 

05K20-20 0.4 thick $19.00 

KUNZ SPOKESHAVES 

Order no. Desc. Blade Width Price 

KU-50 Convex 52mm $41.00 

KU-55 Concave 54mm $41.00 

KU-63 Curved 45mm $25.00 

KU-64 Flat 45mm $29.00 

KU-51A Flat Face 52mm $33.00 

A. 

VERITAS ® SPOKESHAVES 

Our spokeshaves have been designed for 

smooth, effective, chatter free shaping of 

chair spindles, panel edges, paddles, tool 

handles, and all other kinds of freehand 

shaping. All three spokeshaves have a 1/8” 

(0.125”) thick A2 tool steel blade, seated at 

45° to the sole. Each tool is 260mm long 

overall. 


05P33-01 Flat $119.00 

05P33-03 Round $119.00 

05P33-11 Concave $119.00 

PAX CONVEX SCRAPER SET 

Made in Sheffield, this two piece set has 

10 radii: 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 

1-1/8”, 1-1/4” & 1-1/2” dia. 

PAX CONCAVE SCRAPER SET 

Made in Sheffield, this two piece set has 

10 radii: 1/4”, 3/8”, 1/2”, 3/4”, 5/8”, 7/8”, 1”, 

1-1/8”, 1-1/4” & 1-1/2” dia. 


A. PAX-CC Convex $24.00 

B. PAX-CV Concave $24.00 

B. 

VERITAS ® LARGE SPOKESHAVE 

This large spokeshave provides all the utility 

of regular spokeshaves - a tight mouth, simple 

blade depth adjustment and very precise 

machining - but in a larger more robust package 

for quick controlled work. The integrated 

thumbwheels allow quick and repeatable 

blade depth and skew adjustment, and two 

shims are supplied to enable mouth opening 

adjustment to suit your work requirement. 

Order no. 

Price 

05P33-90 $125.00 


75

Sharpening 

Guide 

body► 

stone not 

incl. 

◄Registration Jig 

VERITAS ® MK II SHARPENING SYSTEM 

The key to consistent, fast honing is repeatability 

- and this guide delivers it in spades. 

It will set bevel angles from 15° to 54° and 

a range of back bevels from 10° to 20°. It 

can accommodate chisels as narrow as 

1/4” and blades as wide as 2-7/8” and up to 

1/2” thick. The registration jig slides onto the 

guide body, centring and squaring the blade 

with an integral fence. The blade stop has 

positions for preset bevel angles. A threeposition 

eccentric roller, allows you to hone 

micro-bevels quickly and accurately with a 

turn of a knob. Made from zinc alloy, brass 

and steel. This means quick, accurate sharpening 

and repeatable results. 810g. 

Order no. 

Price 

05M09-01 $85.00 

Attach jig to honing guide to 

set bevel and skew angles. 

VERITAS ® SKEW REGISTRATION JIG 

This jig locks into the MK II honing guide to 

make quick work of setting both skew and 

bevel angles (left or right hand) of chisel and 

plane blades. The skew angle graduations 

cover the range of 10° to 45° in 5° increments, 

and there are additional marks 

(18°, 22°, 28°) to cover the angles of popular 

skew plane blades. The base has four distinct 

tracks providing four bevel angle settings: 

20°, 25°, 30° and 35°. 

Order no. 

Price 

05M09-03 $39.00 

VERITAS ® 

CAMBER 

ROLLER 

ASSEMBLY 

The Veritas MK II 

honing guide has been 

designed to produce accu- r a t e 

and repeatable square bevels on chisel and 

plane blades. However, when using smoothing 

planes on large, flat surfaces, it is desirable 

to hone a camber into the blade edge. 

This allows the cut to taper out on each side. 

Simply replace the standard roller assembly 

with the camber assembly and hone. 

Order no. 

Price 

05M09-05 $30.00 

HONING GUIDE 

Holds your chisel or plane iron in a vice like 

grip at any normal sharpening angle. Rolls 

on a hardened steel wheel. Holds irons from 

2mm to 65mm. 260g. 

Order no. 

Price 

MJ-817 $13.00 

PLANE & CHISEL SHARPENING GUIDE 

Similar to honing guide shown elsewhere 

but, with heavy duty brass roller. Brass roller 

assembly is removable which allows this unit 

to be used on bench grinders equipped with 

mitre slots. Holds blades from 9.5 to 65mm. 

300g. 

Order no. 

Price 

CSG-21 $19.00 

DIAMOND BLADE 

HONE 

Holds 400 and 600 

grit diamond stones 

for sharpening HSS 

or tungsten carbide 

jointer and planer 

blades. Weighs approximately 

80g. 

Order no. 

Price 

K-10-D $39.00 

DRILL DOCTOR 

Professionally sharpens standard twist drills 

from 2.5 to 13mm. Suitable for tungsten carbide, 

cobalt, high speed steel and tin coated 

drills. Powerful 240v motor makes sharpening 

a breeze! Free video included with every 

kit. 1.66kg. 

Order no. 

Price 

DD360X $289.00 

VERITAS ® BEVEL GAUGE 

Half the secret of sharpening is the control 

of blade geometry. Nothing is handier than 

a bevel gauge for quickly checking the grind 

angle of chisels, plane blades, turning tools, 

etc. A quick check confirms the angle last 

used for grinding or honing so that the edge 

geometry can be maintained. Our bevel 

gauge has seven individual slots that will 

measure the most commonly used angles 

from 15° to 45° in 5° increments. Your eye 

is a fine instrument; it can easily interpolate 

other angles in the range, angles like 24° or 

26°. The slots on the gauge are about 3/4” 

deep for good registration. The pocket-sized 

disc is 2-1/2” in diameter with a centre hole 

for hanging it on a nail. Made of solid brass, 

which will not damage a honed edge. 20g. 

Order no. 

Price 

50K09-01 $12.00 

VERITAS ® BLADE 

HONING 

COMPOUND 

This compound is 

the most effective 

on the market. Chromium 

oxide admixed 

with other fine abrasives gives the best combination 

of cutting speed and fine, mirror finish 

with a light wax film. It will adhere well to 

felt, leather, or wood. 180g. 

Order no. 

Price 

05M08-01 $14.00 

CARBA-TEC ® 

CHISEL 

GRINDING JIG 

For grinding a wide 

range of tools. Ideal 

for woodturning 

gouges, scrapers, 

parting tools, and 

chisels (the adjustable 

quadrant positions 

the tool, eg skew chisel at the correct 

angle). Helps produce a hollow ground bevel 

which can be honed to a razor sharpness. 

Order no. 

Price 

CJ-04 $39.00 

DIAMOND DISC SHARPENER 

50mm x 1mm disc with 400grit 

diamond surface on one side. 

Ideal for sharpening or deburring 

router bits, chisels. 

Fitted with 6mm shaft. Max. 

speed: 3,000rpm. 40g. 

Order no. 

Price 

DWG-1 $31.00 


Sharpening 

JAPANESE WATERSTONES 

Order no. Grit Use Price 

WS-300 300 

For fast material removal. Great for restoring old 

chisels. 207x66mm. $37.00 

WS-800 800 

Very useful for taking out nicks or changing 

bevels. 207x66mm $37.00 

WS-1200 1200 

Perfect for initial bevel grinding prior to finishing. 

207x66mm. $37.00 

WS-4000 4000 Gives a very sharp finish on all tools. 177x50mm $37.00 

WS-6000 6000 For a razor sharp polished finish. 185x63mm. $41.00 

WS-8000 8000 

For a mirror finish edge, nagura stone 

incl.210x73mm. $125.00 

Used for mirror polishing, nagura stone incl. 

WS-10000 10000 

205x76mm. $136.00 

WS-16000 1000 1000 grit for grinding out imperfections, and 

/6000 6000 grit for razor sharp finish. Double sided. $73.00 

For cleaning ingrained surface scum from ws. 

NGS-1 

72x23x19mm. $13.00 

For flattening waterstones that have become 

WSF-150 ’dished’ after prolonged use. Measures 150 x $25.00 

50 x 27mm. 

A. 

A. 

A. FORMED WHETSTONES 

Concave forms. Ideal for honing carving chisels. Also included is one 

double sided convex slip stone for inside gouges, etc. 


PWS-1000 1000 grit (set of 2) $37.00 

PWS-4000 4000 grit (set of 2) $37.00 

TRADITIONAL WATER SLIP STONES 

These slip stones are made to our design and to a specified hardness 

to best combine cutting speed and durability. Widely used for 

sharpening firmer gouges, scribing gouges, carving tools and radiused 

blades, these stones can be used on nearly any curved cutting 

edge of simple or compound shape. Available in 3 grit sizes 


Fastest cutting and is used for establishing a basic 

B. 60M90-01 

edge, 1000grit, 95g 

$18.00 

B. 

C. 

D. 

VERITAS ® LAPPING 

PLATE 

Measuring 12” x 4-1/8” x 

1-1/8” high and weighing approximately 

6kg, this is one 

substantial lapping plate! 

Made from an iron chosen for 

its dimensional stability and 

consistency the bottom and 

sides are machined, and the top is ground flat to with-in 0.001” over 

the surface. 


05M20-20 Lapping Plate $109.00 

05M20-07 90# Lapping Grit $6.00 

05M01-04 180# Lapping Grit $6.00 

05M01-05 280# Lapping Grit $6.00 

05M01-06 400# Lapping Grit $6.00 

05M01-07 600# Lapping Grit $8.00 

VERITAS ® STONE POND 

The complete system to 

store, use, and maintain water 

stones up to 12” long. Stones 

can be stored, ready for use, 

in a stand that clamps them 

and provides a base for lapping. 

There is ample space 

for three stones. The lapping 

system is a glass plate, a 

sheet of PSA-backed plastic laminate, and 90x silicon carbide. 2.1kg. 

Order no. 

Price 

05M20-06 $85.00 

VERITAS ® LAPPING KIT 

Silicon carbide is ideal for flattening 

oil, water stones, plane 

bottoms and blades.Sprinkle 

the grit on a piece of glass or 

a steel lapping plate, add oil 

or water (as required), and 

lap the item flat. This easy 

process lets you keep all of 

your stones dead flat. Kit includes 

five 2 oz containers of 

90x, 180x, 280x, 400x and 600x and instructions. 365g. 

Order no. 

Price 

05M01-01 $34.00 

DIAMOND FILE SET 

Set of 10 files, supplied 

in plastic sheath. Length: 

160mm, 210g. 

C. 60M90-02 

D. 60M90-03 

Most useful combination of cutting speed, hardness, 

and degree of finish obtained. It cuts quickly, but still 

leaves a tool with a near-mirror finish superior to that 

achieved with a hard Arkansas slip. 4000grit, 95g 

$20.00 

For final touch-up or occasional stropping while carving. 

8000grit, 95g 

$35.00 

Order no. 

Price 

DF-10 $20.00 

GRANITE SURFACE PLATE 

Measuring 300 x 230 x 50mm with 

0.0001” accuracy. Perfect for lapping 

of tools or checking setups on small 

engineering projects. 

Order no. 

Price 

GSP-1 $62.00 

DIAMOND 

DRESSER 

1/2 carat industrial diamond, 150mm in 

length. Ideal for dressing grinding wheels so 

they run true. 175g. 

Order no. 

Price 

CT-120110 $21.00 


77

Sharpening 

DMT ® DIA-SHARP TM 

Sharpening 

stones have 

a continuous 

diamond surface 

bonded 

to solid steel in a 

unique electroplating 

process that 

quickly puts a razor 

edge on tools. 


Size: 83 x 51 x 1.2mm 

DMT-D3E Extra Fine $15.00 

DMT-D3F Fine $15.00 

DMT-D3C Coarse $15.00 

Size: 101 x 22 x 5mm 




Size: 151 x 51 x 6mm 




DMT-D6X X-Coarse $35.00 

Size: 203 x 76 x 9.5mm 

DMT-D8EE XX-Fine $99.00 

DMT-D8E X-Fine $65.00 



DMT-D8X X-Coarse $65.00 

DMT-D8XX X X-Coarse $99.00 

MINI WHETSTONE 

70 x 25mm, small and easy to carry. Excellent 

for router bits and turning tools. 20g each. 


DMT-W7E Extra Fine $10.00 

DMT-W7F Fine $10.00 

DMT-W7C Coarse $10.00 

DOUBLE SIDED FOLDING WHETSTONE 

Diamond sharpener with two grits. 23 x 

110mm. One on each side. 


DMT-FWFC Fine/Coarse $45.00 

DMT-FWEF X Fine/Fine $45.00 

SINGLE SIDED FOLDING WHETSTONE 

Size: 23 x 110mm 


DMT-FWE X-Fine $29.00 

DMT-FWF Fine $29.00 

DMT-FWC Coarse $29.00 

DMT-FWX X-Coarse $29.00 

DMT ® 10” DUOSHARP STONES 

Size: 203 x 67mm. 


DMT-W250CXNB Crse/Xcrse $159.00 

DMT-W250FCNB Fine/Crse $159.00 

DMT-W250EFNB Xfine/Fine $159.00 

Fine/Crse, no 

DMT-W250ECNB 

base 

$159.00 

DMT ® 8” DUOSHARP PLUS WITH BASE 

This 8” version of the Duosharp has the 

added advantage of a continuous diamond 

section at one end for sharp pointed tools. 

Also included at no cost is the DuoBase with 

non-slip feet. Size: 203 x 67mm. 


DMT-WM8FC-WB Fine/Coarse $139.00 

DMT-WM8EF-WB X-Fine/Fine $139.00 

8” DUOSHARP PLUS WITHOUT BASE 


DMT-WM8CX Coarse/X-Coarse $89.00 

DMT-WM8FC Fine/Coarse $89.00 

DMT-WM8EF X-Fine-Fine $89.00 

DMT ® HANDLED DIA-SHARPS TM 

With overall length of 180mm, these very 

sturdy sharpening stones have been 

moulded onto the plastic handle not glued 

like inferior competitors. Size: 63 x 19mm. 





TAPERED SHARPENER 

100mm long cone tapering from 3-9mm. 

Ideal for carving and turning gouges, toolmaking, 

etc. 600 grit. 110g. 

Order no. 

Price 

DMT-DCSFH $32.00 

FOLDING FLAT FILE 

Tapers from 6-19mm, 110mm long. 


DMT-FFF Fine $33.00 

DMT-FFC Coarse $33.00 

DMT ® 6” 

COUNTERTOP 

WHETSTONE 

Choice of four grits, 1200 extra 

fine, 600, fine, 325 coarse and 220 extra 

coarse. Size: 152 x 50mm. 300g. 


DMT-W6XP X-Coarse $49.00 

DMT-W6CP Coarse $49.00 

DMT-W6FP Fine $49.00 

DMT-W6EP X-Fine $49.00 

DMT ® WAVE 

Combined 

convex and 

concave abrasive 

surfaces. Affords long 

sharpening strokes providing 

1.59mm radii tapering 

to 25mm radi accommodating all curved 

gouges. 


DMT-WAV-E X-Fine $65.00 

DMT-WAV-F Fine $65.00 

DMT ® 10” & 12” DIAMOND STEELS 

Restoring a cutting edge in minutes. This superb 

tool not only straightens but sharpens 

knives. 

Order no. Size/Grit Price 

DMT-DS0F 10”/Fine $39.00 

DMT-DS2F 12”/X-Fine $42.00 

DMT ® DOUBLE 

SIDED DIA-SHARP TM 

Combines two grits in the same 

stone. Fast and easy way to sharpen any 

tool. Size: 150x50mm 

Order no. Size/Grit Price 

DMT-D6CX X-Coarse/Coarse $59.00 

DMT-D6FC Coarse/Fine $59.00 

DMT-D6EF Fine/X-Fine $59.00 

DMT-D6FX Fine/X-Coarse $59.00 


Sharpening 

VERITAS ® GRINDER TOOL REST 

A weakness of bench grinders is that the tool 

rests are virtually useless. Our tool rest can 

be used with 6” or 8” (up to 1” wide) grinders 

and mounts directly in front of the grinder 

and can be readily folded out of the way for 

freehand grinding. An angle-setting gauge is 

included for bevel angles. 510g. 

Order no. 

Price 

05M23-01 $65.00 

B. SKEW GRINDING JIG 

This jig allows you to grind a radius rather 

than a straight 20° skew. The radius is determined 

by the amount the tool projects from 

the jig. 175g. 

Order no. 

Price 

05N13-01 $35.00 

C. STRAIGHT GRINDING JIG 

For straight grinding. Will fit directly to the 

grinder tool rest shown above or will fit on 

any grinders tool rest with an edge parallel to 

the grinding wheel surface. Used for straight 

or 30° bevels. 

Order no. 

Price 

05M06-01 $32.00 

SHAPED FELT WHEEL FOR CARVING 

TOOLS 

A constant problem for carvers is honing the 

inside of gouges, parting, and vee tools. This 

felt wheel not only has the right shape for 

such work, but because it is extra hard, it will 

hold that shape. 150mm in diameter, 22mm 

thick, 5/8” hole with 1/2” bushing. 360g. 

Order no. 

Price 

08M42-03 $85.00 

FLAT FELT BUFFING WHEELS 

The finest edge you can get on any tool is 

with a hard felt wheel. When dressed with 

blade honing compound, the edge is noticeably 

sharper than most razor blades. A medium 

felt wheel is still very firm, but is more 

suitable for carving tools. 


08M40-01 6” x 1/2”, Medium $24.00 

08M40-03 6” x 3/4”, Medium $37.00 

08M40-05 6” x 1”, Medium $42.00 

08M41-03 6” x 3/4”, Hard $42.00 

08M41-05 6” x 1”, Hard $49.00 

7 

TORMEK SHARPENING SYSTEMS 

The key word when sharpening the Tormek way is repeatability. The tools are guided in jigs 

– you remove only a minute fraction of the steel at each sharpening, which makes it fast. 

An extra benefit is that your tools last longer. You can shape the tool exactly to your needs. 

Even such complicated shapes as fingernail turning gouges, spoon carving gouges and 

oval skew chisels with a radiused edge are easily sharpened. Once the shape is created, 

you can resharpen the edge in less than a minute. The water cooled slow speed grindstone 

is in harmony with the physical laws governing the steel tool – the edge does not overheat 

and lose its hardness. You finish the sharpening process on the leather honing wheel, which 

lets you polish the edge to a razor sharpness. No grinding dust is produced to pollute the air. 

The steel particles are deposited into the water trough. The Tormek method is safe. At the low 

speed, you can fully control the sharpening. Since no sparks are produced, there is no risk 

to your eyes and you can safely use the machine in areas of high fire risk. Since 1973 Tormek 

has introduced many new techniques and set the standard in water cooled sharpening. We 

are dedicated to sharpening and we are continuously working on new developments to satisfy 

all your sharpening needs. Buying a Tormek is a safe investment in quality and performance. 

You are assured that all future developments will fit your machine. 

Specifications TOR-T3 TOR-T7 

Housing ABS Plastic Welded Steel 

Grindstone 200 x 40mm 250 x 50mm 

Leather Honing Wheel 145 x 26mm 220 x 31mm 

Main Shaft in stainless steel Yes Yes 

Motor 615x620mm 200 W 

Duty Cycle 30 min/hour Continuous 

Running Speed 120rpm 90rpm 

Gross Weight 9.1kg 16.7kg 

Warranty 7 years 10 years 

Order no. 

Price 

TOR-T3 $579.00 

TOR-T7 $879.00 

TORMEK ACCESSORIES 


TOR-DBS-22 Drill Bit Attachment $349.00 

TOR-HTK-705 Handtool Kit $215.00 

TOR-SVH-320 Electric Planer Blade Jig $249.00 

TOR-TT-50 Truing Tool $105.00 

10 

ACCESSORIES 

• Large range of Jigs 

• Rotating Base 

• Angle Master 

• Honing Wheel 

• Stone Grader 

• Tool Setter 

• Truing Tool 

• Honing Paste 

See our full range of 

Tormek Accessories at 


WOODTURNER’S KIT 

The perfect combination of Tormek accessories 

for the woodturner. Saves you dollars! 

Kit includes the following: 

• TOR-SVD-185 Thumbnail Jig 

• TOR-SVS-50 Multi Jig 

• TOR-SVD-110 Tool Rest 

• TOR-LA-120 Leather Profile Hone 

• TOR-TTS-100 Turning Tool Setter 

• Woodturner’s Instruction Manual 

• BONUS machine cover 

Order no. 

Price 

TOR-TNT-708 $389.00 


79

Sharpening 

CARBA-TEC ® WIDE STONE GRINDER 

Excellent value for money. Great for cleaning up an 

edge on most woodworking and general household 

tools, with a wheel wide enough for carving and 

turning tools. We’ve also included an LED light 

and two toolrests. 9kg. Specifications: 230v, 200w, 

2800rpm approx. Grinding wheels both 6” in diameter, 

1 x 20mm and 1 x 40mm wide aluminium oxide. 

Order no. 

Price 

CT-WSG $99.00 

CREUSEN POWERLINE TM 

8” HIGH SPEED DOUBLE 

GRINDER 

This sturdy bench grinder is 

suited for heavier work and fitted 

with a very powerful 600W 

motor and 200mm diameter by 

25mm wide stones. 


Voltage 

230v, 50-60Hz 

Power 

600w 

Speed 

2800rpm approx. 

Grinding Wheel 200 x 25 x 15mm 

Order no. 

Price 

CG-DS7200T $285.00 

CREUSEN POWERLINE TM 6” HIGH 

SPEED DOUBLE GRINDER 

This is the most popular Creusen 

grinder and great for just about 

any workshop activity. On one 

side is a generous 40mm wide 

aluminium oxide stone and on 

the other a 20mm coarse grey 

aluminium oxide stone for general 

grinding. 


Voltage 

230v, 50-60Hz 

Power 

350w 

Speed 



Order no. 

Price 

CG-DS7150TS $229.00 

CREUSEN POWERLINE TM 6” LOW SPEED DOUBLE GRINDER 

Creusen have made this grinder with woodturners particularly in mind. This model’s slower 

speed prevents burning the 

delicate tips of turning tools. 

It is fitted with 40mm wide 

white stones - one wheel is a 

coarse 60 grit and the other 

is a finer 100 grit; bore size 

of both is 15mm. 


Voltage 

230v, 50-60Hz 

Power 

350w 

Speed 



Order no. 

Price 

CG-DS7500TS $319.00 

Polishing Spindle 

Polishing Set 

CREUSEN GRINDER ACCESSORIES 


CG-900163 Polishing Spindle RH $59.00 

CG-900152 Polishing Spindle LH $59.00 

CG-900245 Polishing Set 150mm $139.00 

CG-900250 Polishing Set 200mm $159.00 

A. 

B. 

CERAMIC SHARPENING STONES 

Ceramic stones are valued for their durability 

and the very keen edge they give in the finer 

grits. These two stones are ideal for carvers 

who do all their sharpening free hand and 

can quickly wear grooves in water stones. 

(A) is about 800 grit and used for edge shaping. 

(B) is about 8000 grit and is used for 

final honing. Both are 4” x 2” x 1/2”. The 

manufacturer states that neither requires lubrication 

and that both clean up quickly with 

soap and water. Made in USA. 


A 60M21-01 800 $49.00 

B 60M21-02 8000 $49.00 

PFEIL ARKANSAS 

SLIP STONES 

Complete set of four 

slip stones in various 

shapes, suitable for all 

carving chisels, gouges. 

Used with honing oil. 175g. 

Order no. 

Price 

PF-ARK-SET $88.00 

PFEIL 

LEATHER 

STROP 

Premium fine calf 

leather mounted on a wooden block. 

FLEXCUT TM SLIPSTROP KIT 

This wooden form has been 

specially profiled 

to allow for polishing 

and deburring 

the hard 

to reach areas on 

the inside of V-tools 

and gouges. Kit quickly polishes 

all hardened steels. 130g. 

B. 


A. PF-ST-R1 120mm long $41.00 

B. PF-ST-R2 Double Sided 150mm $72.00 

Order no. 

Price 

FLX-PW-12 $17.00 

FLEXCUT TM 

GOLD TM 

POLISHING 

COMPOUND 

Specially formulated to apply like a crayon. 

Its blend of aluminium and titanium oxide 

provide a balance between aggressive removal 

of hardened tool steel and offering a 

high-colour polish. 130g. 

Order no. 

Price 

FLX-PW-11 $11.00 

A. 


Clamping, Vices & Benches 

A. 

Basic 

Workbench 

B & C. 

Optional Cabinet 

PROFESSIONAL WORKBENCH 

This European made workbench has all the 

classic features: tail vise, front vise, 40mm 

thick work surface and rear tool well. These 

all combine to give you a solid, sturdy work 

area for planing, paring and clamping. Another 

excellent feature of this bench is that 

you can start with the basic bench shown 

above with drawer and add the cabinet at a 

later time as an upgrade. Sold separately. 


CTW-45 Workbench $1,295.00 

CTW-CAB Opt. Cabinet $299.00 

CARBA-TEC ® HEIGHT 

ADJUSTABLE WORKBENCH 

The latest addition to our quality workbench 

range. This heavy duty laminated solid oak 

workbench features a solid 25mm thick work 

top, double thick front, back and sides, and 

heavy duty height adjustable steel legs. This 

great bench suits all woodworkers...short 

and tall. Quality vise hardware and powder 

coated shelf and leg assembly add to the 

quality and presentation of this fine bench. 

Order no. 

Price 

WB-6030 $799.00 

VERITAS ® TWIN SCREW VISE 

The only non-racking full width end vise on 

the market. Clamp anything anywhere in the 

vise, the jaws stay parallel. The chain drive 

ensures parallelism and eliminates racking. 

A spring-loaded pin lets you disengage the 

chain for controlled skewing. Enough chain 

is included for benches up to 32” wide. Installation 

hardware & mounting instructions 

included. Wooden jaws not included. 

Order no. 

Price 

05G12-26 $309.00 

VERITAS ® INSET VISE 

This low-profile vise is similar to a wagon vise 

in function, but in a compact, self-contained 

form for easy installation in a work surface, 

adding a permanent, adjustable dog right 

where it’s needed. Designed to hold work 

between its single jaw and an external stop 

such as a bench dog, it has a clamping capacity 

that is limited only by the size and doghole 

spacing of your work surface. 101.6 (4”) 

range of travel. 1.17kg. 


05G31-01 Inset Vise $99.00 

05G31-03 Opt. Pivot Jaw $16.00 

VERITAS ® QUICK-RELEASE FRONT VISE 

Using the same quick release mechanism as 

our tail vise, our front vise has a simple on-off 

cam lever to engage or disengage the Acme 

threaded screw, allowing it to apply up to 

180kg of force in either clamping or spreading 

applications. The screw mechanism provides 

310mm of overall travel (less the thickness 

of your wooden jaw and bench apron). 

The vise requires an unobstructed mounting 

area on the underside of the bench top at 

least 300mm wide by 405mm deep (with a 

50mm thick bench apron and a 44mm thick 

jaw). Made in Canada. 

Order no. 

Price 

05G34-01 $399.00 

VERITAS ® QUICK- 

RELEASE SLIDING 

TAIL VISE 

Quickly incorporated into a new bench construction 

or easily retrofitted to an existing 

bench without major surgery. The end plates 

are symmetrical, so you can install the T- 

handle and quick-release lever in a right- or 

left-handed orientation, allowing the vise to 

be mounted at either end of the bench. 

Order no. 

Price 

05G30-01 $339.00 

A. VERITAS ® HOLD-DOWN 

Clamps workpiece to a bench or anywhere 

a 19mm hole can be drilled. The long, low 

profile arm is unobstructed at the clamping 

end, allowing good access to work from all 

sides. The 254mm hold-down post gives you 

203mm of clamping capacity, matching the 

203mm throat capacity. An accessory post 

of 139.7mm is also available as an option. 

1.37kg. 

B & C. ROUND BENCH DOGS 

Good dogs make a bench far more functional. 

These bench dogs are made from 

solid-brass rod and can be installed in any 

bench by drilling a 19mm hole. The combined 

cross-hatching and 2° inward slope of 

the dog face hold wood very securely. A side 

spring holds the dog at any desired projection. 

The 111mm Bench Dogs are standard 

length. The Bench Pups (at 60mm) are fine 

for benches with tops up to 38mm thick. Sold 

in pairs. 

D. BENCH DOG & PUP MUZZLES 

These slip resistant covers slide over bench 

dogs (or pups) to give you a non-marring 

surface that will hold firmly. Sold in pairs. 

F. 

E. WONDER DOG 

With a 19mm shank and 6” long, these dogs 

can be used anywhere you can drill a 3/4” 

hole. The swivel handle combined with the 

fine screw lets you apply ample clamping 

pressure in any position. 640g. 

F. WONDER PUP 

The same in all respects as the Wonder Dogs 

except that the post is shorter (70mm). The 

side spring is replaced with an O-ring. 400g. 


05G14-01 A. Holddown $99.00 

05G14-02 accsy post 139.7mm $12.00 

05G04-02 B. Bench Dog $37.00 

05G04-04 C. Bench Pups $29.00 

05G04-10 D. Bench Dog Muzzle $6.00 

05G04-06 D. Bench Pups Muzzle $5.00 

05G10-01 E. Wonder Dog $49.00 

05G10-02 F. Wonder Pup $45.00 

E. 

D. 


81


VERITAS ® SURFACE CLAMP 

This fast-acting clamp can be used anywhere 

you can drill a 19mm diameter hole. The post 

has a wedging mechanism that anchors it 

firmly in material as thin as 5/8” (15.9mm) - 

depending on the strength of material. This 

makes it ideal for use with jigs and fixtures 

such as sliding tables for saws. The clamp 

arm can grip anything from veneer to material 

up to 3-3/4” (95.2mm) thick. 

Order no. 

Price 

05G19-01 $87.00 

VERITAS ® PANEL CLAMP SET 

Bowed panels, a thing of the past? Easy to 

use, tightens by hand, stackable for production 

work. Best of all, makes double clamp 

bars of any length to suit your own needs. 

The serrated posts grip the bars, keeping a 

panel flat under any pressure load without allowing 

the bars to lift. Bars can be made by 

drilling 3/4 ” diameter holes in 4 x 2’s allowing 

you to stack panels, since there is room 

for the top of one post and the bottom of 

another in the same hole. Clamp any thickness 

from 5/8” to 2” with the clamp pads 

dead centre on the stock. The screw has 5” 

of travel. Wood not included. 720g. 

Order no. 

Price 

05G16-01 $59.00 

DOUBLE PANEL CLAMP KIT 

Eliminates buckling during board jointing 

by applying pressure in both horizontal and 

vertical directions. Suitable for projects up to 

85mm thick. Maximum width is determined 

by length of 50mm x 50mm wooden beams 

(not included). Double panel clamps are sold 

individually, two or more are usually required 

for most projects. 1.71kg. 

Order no. 

Price 

YF-00101 $41.00 

IRWIN SASH CLAMPS 

Order no. Capacity Price 

IRW-135-2 610mm $59.00 

IRW-135-3 760mm $59.00 

IRW-135-4 916mm $61.00 

IRW-135-5 1070mm $64.00 

IRW-135-6 1220mm $65.00 

IRWIN T-BAR CLAMPS 

Order no. Capacity Price 

IRW-136-5 1070mm $125.00 

IRW-136-6 1220mm $134.00 

IRW-136-7 1370mm $135.00 

IRW-136-9 1680mm $147.00 

IRW-136-11 1980mm $162.00 

GROZ 

HEAVY DUTY 

CLAMP HEADS 

A bar clamp of any length can b e 

made by using a piece of timber 25mm thick. 

The timber is then drilled with holes, producing 

a light duty bar cramp as strong and 

as true as the timber chosen. These clamp 

heads also feature a fixed jaw that is slightly 

angled inward to promote even clamping. 

Order no. 

Price 

GZ-2525 $32.00 

ROCKLER DELUXE 

RATCHETING BAND CLAMP 

Stitched band eliminates fraying and is 

crimped to the clamp so it won’t come loose 

when you’re clamping tight. Permanently attached 

wrench will always be ready for use. 

Rugged 1”Wx10’L (25.4mmx3m) nylon band 

is rated for loads up to 453kg. Selflocking 

cam guarantees a positive hold and instant 

release. 

Order no. 

Price 

RK-41419 $19.00 

ROCKLER BOX JOINT CAULS COM- 

PLETE SET OF 3 SIZES X 4. 

Uniformly spaced pressure points clamp 

individual box joint fingers at the corners to 

give you the tightest joints possible. Plastic 

cauls stand 6-1/4” (1/4” Cauls), 6-3/8” (3/8” 

Cauls) and 6-1/2” (1/2” Cauls) tall. Four 

Cauls per pack. Patent pending. 

Order no. 

Price 

RK-42784 $32.00 

PIPE CLAMPS 

Make your own clamps with these handy but 

reliable fittings. All you need is a piece of 3/4” 

threaded pipe, cut to a desired length for the 

job. 1kg. 

Order no. 

Price 

PIPE-19 $16.00 

SURE-FOOT PLUS TM 3/4” PIPE CLAMP 

New and improved design features 2-1/4” 

high jaws — a half inch higher than standard 

pipe clamps! Extra-wide 2-1/2” foot provides 

exceptional stability and prevents tipover 

during setup. It won’t rock on uneven 

bench surfaces! Higher base raises the pipe 

1-1/2” above table to allow for greater handle 

clearance, so you won’t have to position 

clamp handle off the edge of a bench. 


RK-30921 Pipe Clamp $29.00 

RK-39897 Clamp Pads 4pk $6.75 

GROZ T-BAR & 

SASH CLAMPS 

Quality clamps for any job. 


GZ-39100 T-Bar 900mm $56.00 

GZ-39101 T-Bar 1200mm $59.00 

GZ-39102 T-Bar 1500mm $63.00 

GZ-39103 T-Bar 1800mm $71.00 

GZ-39160 QR Sash 750mm $60.00 

GZ-39161 QR Sash 900mm $63.00 

GZ-39162 QR Sash 1050mm $68.00 

GZ-39163 QR Sash 1350mm $73.00 

GZ-39164 QR Sash 1650mm $83.00 

GZ-39165 QR Sash 1950mm $94.00 

SURE FOOT TM 36” 

ALUMINIUM BAR CLAMP 

Extra wide 2-1/2” foot for 

exceptional stability. Higher 

base that raises the bar 

1-1/2” above the table for excellent handle 

clearance. Built-in clamp hook locks onto a 

3/4” board eliminating the need to “clamp 

the clamp” when hanging on a wall. 

Order no. 

Price 

RK-41815 $59.00 



HANDSCREW CLAMPS 

Classic cabinet makers bench clamps with 

wooden jaws that won’t mark your work or 

slip. 


HSC-4 50mm Throat $10.00 




BENCH STOP 

Mounts flush with bench surface. Simply turn 

a screw and the jaw raises and locks in position. 

Ideal for planing and sanding. 80g. 

Order no. 

Price 

MJ-815 $15.00 

LARGE 

FRONT VISE 

10-1/2” x 21” overall 

with a 1-1/8” diameter 

screw, and 13” clamping capacity 

less front jaw thickness. It can be 

added to an existing bench or built into an 

new one. 

Order no. 

Price 

CTV-2038 $79.00 

GROZ QUICK 

RELEASE VISES 

Simply pressing the trigger 

initiates the quick action, 

with the front jaw sliding 

freely. Releasing 

the trigger returns the 

mechanism to normal for fine adjustment. 

A very useful feature in repetitive work situations. 

Made from close-grained grey cast 

iron, these robust vises have an accurately 

machined housing for smooth sliding movement 

and true parallel action. Jaw opening 

capacity for 175mm vise is 200mm and 

250mm for the 225mm vise. 


GZ-39007 175mm $104.00 

GZ-39009 225mm $167.00 

KREG ® KLAMP VISE 

The Klamp Vise can be connected to 

almost any workbench providing over 158kg 

of clamping power. Vertical clamping, sideways 

clamping, vise-style clamping, routing, 

sanding, sawing, and a whole lot more. 

Order no. 

Price 

KR-KKS1060 $82.00 

GROZ QUALITY G CLAMPS 

Order no. Cap. Weight Price 

GZ-35802 150mm 1.25kg $17.00 

GZ-35803 200mm 1.5kg $25.00 

THREE-WAY 

EDGING 

CLAMP 

Capacity 

65mm, load 32kg. 

For gluing edge 

banding etc. Weight 

950g. Price for each. 

Order no. 

Price 

JEC-65 $17.00 

GROZ 

150MM 

CLAMP 

ON VISE 

A useful, lightweight 

vise for the young 

woodworker or 

home handyman. 

The design allows for two clamping 

options. Permanent clamping on the workbench 

is available via bolt slots in the vise 

base or via the 55mm integrated clamp. 

Opening capacity: 120mm. 3.3kg. 

Order no. 

Price 

GZ-39006 $48.00 

GROZ PLAIN SCREW 

WOODWORKING VISE 

Manufactured from close-grained grey cast 

iron for long years of service. Accurately machined 

housing assure smooth sliding movement. 

Solid steel guide rods reduce wear 

and tear giving the vises a smooth and true 

parallel action, free of side or cross deflection. 

Jaw width is 175mm. 200mm capacity. 

7.5kg. 

Order no. 

Price 

GZ-39001 $83.00 

TWO WAY CROSS SLIDE VISE 

Secures workpiece firmly and accurately on 

the drill press table. Positive positioning in 

two coordinates, lets you move the piece 

accurately. These controls provide precise 

adjustment for a myriad of drilling and cutting. 

Jaw width 103mm, Jaw opens 95mm. 

Weight: 10kg. 

Order no. 

Price 

CSV-4 $83.00 

PARROT VISE 

Built like a machinist’s vise, the Parrot vise incorporates 

a unique tightening cam that lets 

it pivot freely through 360° until you tighten 

the jaws firmly, locking the vise in place. This 

allows you to back off the clamp screw just 

enough to rotate the vise for access to any 

part of a work piece without releasing it from 

the jaws. Additionally, the vise can be lifted 

from its heavy pivot post and reinstalled horizontally. 

89mm wide cast iron jaws open to 

120mm. There is a 44mm square machined 

anvil just behind the jaws. 4kg. 

Order no. 

Price 

PARROT-VISE $136.00 


83


HEAVY DUTY PRO FRAMERS CLAMP 

Solid aluminium. Capacity min. 67mm 

square to max. 915mm square or equivalent 

in rectangular or round. Now fitted with pivoting 

jaws that allow virtually any angle to be 

securely clamped. Suitable for framing or 

furniture construction, etc. 1.2kg. 

Order no. 

Price 

TV-148 $46.00 

HEAVY DUTY PRO 

FRAMERS 

CLAMP 

Solid aluminium. 

Capacity min. 67mm 

square to max. 915mm 

square or equivalent in 

rectangular or round. Suitable 

for framing or furniture construction, 

etc. 1.2kg. 

Order no. 

Price 

TV-146 $41.00 

VERITAS ® SPEED FRAME CLAMP 

The fastest adjusting frame clamp on the 

market. The four clamping nuts are designed 

to let you make fast adjustments. They are 

cross drilled to slide easily until they come 

up against a corner clamp; then their threads 

engage. To release, just back them off a 

turn and they slide again. The corners are 

accurate extrusions with a machinists inside 

corner and provide a glue gullet. Kit includes 

extensions as shown giving a maximum capacity 

of 44” square or 65” x 23” rectangle. 

1.24kg. 

Order no. 

Price 

05F01-20 $49.00 

PROGRIP TM PANEL GUIDE 

The ideal solution for guiding routers, circular 

saws, jigsaws, etc when machining large 

or small panels. The extruded aluminium rail 

is fitted with a 3-stage cam clamp fixed at 

one end and a moveable foot at the other. 

The extrusion incorporates the use of a T-bolt 

slot on both sides to allow the use of custom 

made jigs, etc. Unit clamping capacity is 

2.5m, perfect for trimming sheet material or 

plywood on site. Due to its length this product 

can only be shipped by road freight. 6kg. 

Order no. 

Price 

FM-105 $157.00 

ProGrip 

System 

EXTERNAL MITRE CLAMP 

A truly versatile clamp with a unique swivel 

head, enabling the woodworker to clamp 

wood of even or uneven thicknesses at 90° 

for T joints, L joints, mitre joints. 1.10kg. 

Order no. 

Price 

TV-286 $41.00 

INTERNAL MITRE CLAMP 

Similar to the TV-286, this clamp is heavy 

duty and designed for internal clamping situations. 

This clamp is also suitable for mounting 

directly onto a workbench or jig. 1.20kg. 

Order no. 

Price 

TV-276 $41.00 

BAND CLAMP 

Suitable for clamping case goods, picture 

frames, chairs, etc. Maximum circumference 

3.8 metres. 520g. 

Order no. 

Price 

96601 $16.00 

BESSEY LM SERIES CLAMPS 

Originally intended for use where moderate 

clamping pressure was to be applied, Bessey’s 

LM Series quick action clamps have 

proven highly successful in DIY and industrial 

sectors alike. Particular applications this type 

of clamp suits include model and instrument 

making, light engineering and various home 

workshop tasks. LM series clamps have a 

throat of 50mm and are supplied with plastic 

caps. They are die cast and are intended for 

light duty work. 


BES-LM10 100mm $12.00 

BES-LM15 150mm $12.00 

BES-LM20 200mm $12.00 

BES-LM25 250mm $13.00 

BES-LM30 300mm $13.00 

Baseplate 

mounting 

Cam-clamp 

mechanism 

PROGRIP TM SYSTEM 

ProGrip is a comprehensive system for 

guiding power tools such as routers and circular 

saws, etc. The extruded aluminium rail 

is fitted with a 3-stage cam clamp fixed at 

one end and a moveable foot at the other. 

The extrusion incorporates a T-bolt slot on 

both sides to allow the use of custom made 

jigs, etc. These slots also accept UHMW nylon 

router and saw bases. Also incorporated 

in the centre of the extrusion is a sliding metric 

and imperial scale. ProGrip’s secondary 

use is clamping jobs requiring low to medium 

clamping pressure. 


FM-14N 14” ProGrip $31.00 

FM-24N 24” ProGrip $41.00 

FM-36N 36” ProGrip $48.00 

FM-50N 50” ProGrip $60.00 

FM-14BD Universal Base $48.00 

FM-08 Back to Back Adaptor Kit $21.00 


Power & Pneumatic Tools 

Invented for Life 

Professional 

GHO 15-82 PLANER 

The fastest and least expensive 

blade changes on the market 

due to durable Woodrazor 

blades and easiest possible 

adjustment. 

Order no. 

Price 

BO-GHO1582 $219.00 

RANDOM 

ORBITAL 

SANDER 

Features; 

Compact, 

ergonomic 

d e s i g n 

with three 

softgrip surfaces for variable 

grip positions. Bosch Micro-filter 

system: perfect, efficient dust extraction. 

Order no. 

Price 

BO-GEX125-1AE $159.00 

GEX150 TURBO RANDOM 

ORBIT SANDER 

• Just one click: switch from 

fine sanding to coarse sanding 

or polishing 

• Five times more material 

removal in turbo operation 

(coarse sanding) 

Order no. 

Price 

BO-GEX150T $449.00 

PALM ROUTER 

GMR1 

Features; 550W 

motor - The most 

powerful palm 

router. Suitable 

for hinge mortising, 

decorative 

working on 

edges, groove 

cutting, dovetail cutting, window 

cutouts, decorative inlays, flush 

trimming and more, power and 

precision in your hand. 

Order no. 

Price 

BO-GMR1 $309.00 

GOP 250CE MULTI CUTTER 

• Powerful 250W motor with 

constant electronics 

• Small grip circumference for 

convenient, comfortable work 

and precise results 

• Ball socket joint and Zn gear 

box, for flexibility, robustness 

and vibration reduction. 

Order no. 

Price 

BO-GOP250CE $229.00 

GHG 660 

LCD HEAT 

GUN 

• Cold setting: heating element 

cools down within approx. 1 

minute 

• Removable coarse dirt filter 

for cleaning 

Order no. 

Price 

BO-GHG660LCD $189.00 

GCM 12 GDL SLIDING 

COMPOUND MITRE SAW 

• Axial-Glide TM System allows 

for expanded cutting capacity 

and smooth precision cuts. 

• Dual line precision Laser 

• Softstart for smooth ramp up 

of saw 

• Up to 110mm height and 

341mm cutting width 

Order no. 

Price 

BO-GCM12GDL $1,199.00 

GTA 2500 WORKBENCH 

• Robust steel construction 

and pneumatic tyres for high 

level of work safety 

Order no. 

Price 

BO-GTA2500 $499.00 

GSR 18V-LI CORDLESS 

DRILL/DRIVER 

• Shortest head length in its 

class for easy handling 

• Longest runtime in its class - 

finish many applications in one 

charge 

Order no. 

Price 

BO-GSR18V-LI2 $289.00 

GSB 16RE IMPACT DRILL 

• Robust and powerful 701 W 

motor for tough applications 

• Sturdy Metal Keyless chuck 

for easy and fast change of accessories 

Order no. 

Price 

BO-GSB16REKLC $149.00 

GWS 8-115 ANGLE GRINDER 

Features; 800 watts of power, 

good handling due to ergonomically 

adapted housing and spindle 

lock for easy disc change. 

Order no. 

Price 

BO-GWS8-115 $199.00 

GAM220MF ANGLE 

MEASURER 

• Automatic calculation of 

single and double mitre angles 

• Rapid calculation and transfer 

of angles by means of memory 

function 

Order no. 

Price 

BO-GAM220MF $199.00 

TABLE SAW GTS10XC 

• Motor brake, soft start, over 

load protection and constant 

speed electronics. 

• Integrated sliding table for 

workpieces up to 355mm 

Order no. 

Price 

BO-GTS10XC $1,099.00 

STAND TO SUIT GTS10XC 

Folds flat for easy and lightweight 

transport and storage 

Order no. 

Price 

BO-GTA6000 $199.00 

GLM 80 LASER 

RANGEFINDER + R60 

MEASURING RAIL 

• Measurements up to 

80m 

• New functionalit due to 

integrated 360° incline 

sensor 

• Up to 25,000 measurements 

per charge 

• Set includes rangefinder and 

rail 

Order no. 

Price 

BO-GLM80SET $379.00 


85


Quality German Made Power Tools 

Supplied 

in systainer 

Supplied 

in systainer 

Supplied 

in systainer 

PLUNGE SAW TS 55 WITH 1400MM 

GUIDE RAIL 

Strengths and benefits: 

• FastFix: quick and easy saw blade 

changing and adaptation to the 

working material 

• Spring-loaded riving knife for 

unhindered plunge cuts 

• Attachable splinterguard for 

high-quality results 

• Quick-acting brake system for safe, 

convenient sawing 

• Tool-less play setting on the guide rail 

Order no. 

FE-561508 

Price 

$999.00 

GEAR DRIVEN ECCENTRIC SANDER 

ROTEX RO 150 


• Three tools in one: coarse sanding, fine 

sanding and polishing 

• ROTEX rotary motion for efficient 

material removal 

• Eccentric motion for high-quality, 

scratch-free surfaces 

• FastFix sanding pad system, tool-less 

• Ideal ergonomic grip positions 

• Sanding up to the edge thanks to the 

Festool PROTECTOR 

Order no. 

FE-571807 

Price 

$935.00 

ECCENTRIC 3 & 5MM SANDERS 

ETS 150/3 


• 3mm sanding stroke for an excellent 

surface finish. 

• 5 mm sanding stroke for efficient 

material removal. 

• Dual bearing for a long service life 

• Weighs only 1.8 kg for particularly 

effortless work. 

• Sanding pad brake for safe, faultless 

work - no rework. 

• Stepless speed preselection, constant 

speed even under load. 


FE-571789 3mm $560.00 

FE-571797 5mm $560.00 

Supplied 

in systainer 

KAPEX KS 120 SLIDING COMPOUND 

MITRE SAW 


• Twin-column design for accurate cuts 

• Compact, lightweight design for 

convenient transport 

• FastFix saw blade change for 

adaptation to the working material 

• Precision angle transfer via smart bevel 

and dual-line laser 

• Fine bevel adjustment from the front of 

the machine 

• Quick-action brake 

Order no. 

FE-561288 

Price 

$1,850.00 

THE CLEANTEX CT26 & CT36 MOBILE 

DUST EXTRACTORS 


• 99.95 separation efficiency at .03 

microns. 

• Antistatic function prevents static 

build-up during use. 

• Constantly high suction because of the 

compact high performance turbine. 

• Attachment of Systainers via Sys-Dock. 

• Hose garage and cable windup for 

greater tidiness and safety. 

• Economical because of the optimal use 

of the available volume with a 

SELFCLEAN filter bag in the container. 


FE-583494 26L $1,099.00 

FE-583495 36L $1,199.00 

CORDLESS DRILL CXS 


• Impressive ergonomics and light weight 

(0,9 kg) for comfortable drilling and 

screwdriving. 

• The compact and handy shape 

facilitates work even in tight spaces. 

• FastFix interface and CENTROTEC 

rapid tool-change system. 

• 12-stage torque setting and switch-off 

for precise screwdriving. 

• Latest Lithium-ion battery technology 

for the longest sustained usage. 

Order no. 

FE-564269 

Price 

$399.00 


FESTOOL CORDLESS DRILL TI 15 

IMPACT SET 


• Impact driver, drill driver and angle 

driver all in one tool! 

• Perfect for decking or weatherboards - 

any tough, repetitive fastening task. 

• Built to last with a powerful 15V EC-TEC 

brushless motor 


FE-564356 Set Version $799.00 

Try the 

tools 

before you buy 

at a Festool 

Test Centre 

Skin 

versions 

from 

$309 

Visit a Festool Test Centre at your 

local Carba-Tec ® Store where you 

can try the tools before you buy and 

experience Festool quality first hand! 

Set 

Version 

DOMINO JOINING SYSTEM DF 500 


• Versatile in application with DOMINO 

sizes 4x20 mm to 10x50mm. 

• Patented routing principle, unique 

among handheld tools, for smooth and 

accurate work. 

• Stops that are quick and easy to adjust, 

for accurate results. 

• Rotation-proof joint with DOMINOs 

providing maximum stability. 

• System accessories compatible with 

both DOMINO joiners. 

Order no. 

Price 

FE-574257S 

$1,695.00 

DOMINO XL JOINING SYSTEM 



sizes 8x20mm to 14x140mm 




• Stops that are quick and easy to adjust. 


• Depth stops allow for routing from 15 to 

70mm deep. 

• Innovative stop system - the DF700 is 

positioned quickly and accurately using 

integral stop pins. 

• Board joining, cabinet making or light 

framework joins - the DOMINO XL is 

perfect for large work pieces. 

Set version includes trim stop and cross 

stop accessories. 


FE-574423 Basic $1,975.00 

FE-574423S Set Version $2,075.00 


ELECTRIC HAND DRILL 

POWERED LOCK 

MORTISER 

Simple, easy to use, self 

centring jig for cutting mortises 

for door locks. Drive shaft 

accepts 1/4” shank router bits 

or PC style mortise cutters. 

Mortise length and 

depth are controlled by 

the integrated stop-collars. Unit 

is powered by any electric power 

drill (not included) and is supplied 

in a great carry case. Maximum depth 

of cut: 150mm, 6.5kg. 

Order no. 

Price 

LM-2 $289.00 

Optional Mortising Bits to suit 

Order no. Width Price 

PC-43698 5/8”-16mm $59.00 

PC-43703 3/4” - 19mm $59.00 

PC-43700 13/16”-20mm $59.00 

PC-43701 7/8”-22mm $59.00 

PC-43702 15/16”-24mm $59.00 

PC-43704 1”-25.4mm $59.00 

PC-43745 1-1/4”-32mm $75.00 

CARBA-TEC ® BENCHTOP 

EDGEBANDER 

Features SWISS made 2000 watt Steinel heat 

gun with infinitely variable temperature control 

and 2 speed blower. This machine will 

laminate pre-glued banding up to 56mm in 

width. Overall dimensions 680 x 680mm. 

Order no. 

Price 

CTEB-401 $499.00 

CARBA-TEC ® END 

TRIMMER 

After edgebanding 

your board, the end 

trimmer is an essential 

accessory for perfectly 

trimming the excess 

length off your banding. 

Order no. 

Price 

ET-401 $29.00 

PRO-GRIP HINGE 

MORTISE JIG 

Easy to set up, adjust 

and use. This kit 

clamps on to your 

door, and uses the 

supplied mortise bit 

to recess your hinges accurately time and 

time again. Replacement bits to suit are Box 

Joint Bit (BJB-95), Mortising Bit (801-128- 

11, if using bearing etc of old bit) or bearing 

(791-010-00 ) and stop collar (541-001-00). 

Order no. 

Price 

FM-78 $85.00 


87


3 Stage turret 

MULTI-STAND - WORK SUPPORT 

Multi-purpose, adjustable support stand with 

extra-wide tripod base for excellent stability 

on level or uneven ground. Folds down in 

seconds for convenient transportation and 

storage. Maximum load is approximately 

100kg. Height range is 835-940mm, Vertical 

through horizontal tilt adjustment. 6.2kg. 

Order no. 

Price 

TRI-MSA200 $59.00 

PRECISION ROUTERS 

Specifications TRI-JOF001 TRI-TRA001B 

Input Power 1010W, 1-1/3hp 2000W, 2-3/4hp 

Speed 8000- 22,000rpm 8000- 21,000rpm 

Soft Start Yes Yes 

Speed Control Yes Yes 

Collet 1/2” with 1/4” reducer 1/2” with 1/4” reducer 

Depth Adjustment 

Micro Winder and Conventional “free” 

plunge 

Height Winder Kit 

Winder - Rack & Pinion, Micro Winder, 

Conventional “free” plunge 

Spindle Lock Auto Auto 

Plunge Range 0 to 59mm 0 to 68mm 

Micro Adjustment Infinite Infinite 

Bit Changes 

Through-base, single wrench action, auto 

shaft lock 

Through-base, single wrench 

Safety On/Off Yes Yes 

Weight 4.3kg 7.4kg 

Price $279.00 $399.00 

ROUTER TABLE SYSTEM 

The router mounting plate features slots for rapid 

installation of all Triton Routers, however we 

have included quality heavy duty fittings allowing 

almost any 1/4” or 1/2” Router to be fitted*. By 

adding other accessories as featured, you can 

perform jigsaw cutting, biscuit joining and finger jointing. Accepts 

most 1/4” & 1/2” routers.** May not be suitable for D-handle models 


Table Size 

Cuts 

Standard Inclusions 

Suits 

Weight 

540 x 690mm 

Planing, trenching, rebating, moulding 

Planing shims, alignment tool & cutter inserts 

Most Routers 

12.5kg 

Moulding against the fence 

Safe free-hand operation 

End grain work on 

sliding protractor 


TRI-RTA300 Router Table System $299.00 

TRI-RSA300 Router Table Stand $269.00 

SERIES 2000 

WORKCENTRE 

SYSTEM 

You don’t need to be a professional 

woodworker for 

craftsman-like results. With 

a Triton Workcentre and 

a circular saw you’ll be 

amazed at how easily 

and accurately you can 

make quality furniture, 

toys, craft items and 

household renovations. As a 

stand-alone unit the Workcentre 

offers amazing versatility, unparalleled 

by any other product. 

With the addition of Triton quality 

accessories, it becomes a complete 

woodworking system. * 

Circular saw not included. 


Suits 

Cuts 

Capacity 


Weight 

45° Bevel Saw 

Mitre Saw 

Mitre Cuts 

Most circular saws 184-235mm 

Rip up to 620mm, Mitre 0° to 45° left & right 

45° bevel rip up to 400mm wide, Crosscut up to 500mm 

Bevel crosscut and compound mitre 

Rip: 0 to 620mm, Crosscut: Up to 500mm 

Standing: 900 x 600 x 1300mm, Folded: 350 x 440 x 

1000mm, Table Top: 870 x 640mm 

35kg (without saw) 

Order no. 

Price 

TRI-WCA201C $699.00 



Precision Power Tools 

UPGRADE YOUR WORKCENTRE SYSTEM 

HEIGHT WINDER 

KIT 

Fits the Workcentre 

pressed steel chassis 

for quick and 

precise blade height 

adjustment. Control 

blade height by a 

winder through the table slot, or by a thumbwheel 

in crosscut mode. 

Order no. 

Price 

TRI-WCA390 $79.00 

WHEEL KIT 

Add the convenience 

of easy storage and 

portability by adding 

a pair of retractable 

wheels. 

Order no. 

Price 

TRI-AWA200 $59.00 

SLIDING EXTEN- 

SION TABLES 

Extends the ripping 

and cross cutting of 

the Workcentre Sliding 

table locks for 

conventional ripping 

or unlocked for use 

as a sliding panel saw. The Maxi handles full 

size 2400mm x 1200mm sheets with a rip capacity 

of 1200mm from the blade and can 

cross cut sheets up to 1200mm wide. The 

Mini is perfect when space is limited and can 

rip up to 1000mm from the blade and cross 

cut sheets up to 600mm wide. Dismantles to 

convenient size for storage. Offers a fully adjustable 

fence. 


TRI-ETA100 Mini $379.00 

TRI-ETA300 Maxi $499.00 

BEVEL 

RIPPING GUIDE 

Fully adjustable from 

15° to 90°, enables 

you to bevel rip or 

chamfer long and 

wide workpieces 

on the Workcentre. 

Guide slot enables use of the Workcentre 

protractor. 

Order no. 

Price 

TRI-BRA200 $229.00 

ROUTER MOUNT- 

ING PLATE 

Accepts most routers 

for use in the 

cross cut mode for 

overhead routing. 

Create trenches or 

dados quickly and 

easily or add a figured edge to panel work. 

Order no. 

Price 

TRI-AJA150 $59.00 

DUST 

COLLECTOR 

This handy bucket 

prevents dust filling 

up or clogging your 

vacuum cleaner. 20 

litre capacity. 

Order no. 

Price 

TRI-DCA300 $69.00 

DUST BAG 

Dust bag fits beneath 

the Workcentre 

allowing effective 

dust collection 

in tablesaw mode. 

Removable pouch 

allows easy disposal 

of dust. 

Order no. 

Price 

TRI-DCA250 $99.00 

PLANER 

ATTACHMENT 

KIT 

Accepts most popular 

82mm electric 

planers. Fold-down 

position allows fast 

changes between 

planer and saw modes. Easily detaches for 

storage. Includes detachable dust collection 

bag and separate switch box. 

Order no. 

Price 

TRI-EPA001 $249.00 

ROUTER TABLE 

Expand your Triton 

Workcentre to an almost 

limitless list of 

applications. 

Order no. 

Price 

TRI-RTA300 $299.00 

SUPERJAWS - PORTABLE CLAMPING 

SYSTEM 

This is the workstation you take right to the 

job. It provides fast and easy hands free 

clamping action of material up to 956mm 

and features a massive force of up to 1000kg 

for all clamping or pressing applications. It 

holds anything; car parts, bicycles, timber 

and tubing. Standard jaws are made of Urethane, 

maximum load approximately 100kg. 

Folded size 275 x 775 x 295mm, standing 

size 980 x 1000 x 860mm. Weighs 16kg. 

Order no. 

Price 

TRI-SJA200 $169.00 

UPGRADE YOUR SUPERJAWS 

LOG JAWS- For Powerful Clamping 

Order no. 

Price 

TRI-SJA460 $39.00 

CAST IRON ENGINEERS JAWS 

Order no. 

Price 

TRI-SJA470 $59.00 

TOOL TRAY 

Order no. 

Price 

TRI-SJA420 $35.00 

WOODRACK - STORAGE SYSTEM 

Ideal for the woodworking workshop. Easy 

to install. It’s highly suitable for metal products 

in an engineering workshop. The Triton 

woodrack also provides an excellent storage 

solution in domestic homes for storing 

a wide range or products neatly and safely. 

Order no. 

Price 

TRI-WRA001 $59.00 


89

Routing & Accessories 

CMT TM SOLID CARBIDE TWO FLUTE 

SPIRAL BIT L 

Order no. D X L Price 

1/4” Shank Upcut Bit 

191-001-11 3.2 12.7 50.8 $25.00 

191-003-11 4.0 12.7 50.8 $25.00 

191-005-11 4.75 19.0 50.8 $25.00 

191-007-11 6.35 19.0 50.8 $25.00 

191-008-11 6.35 25.4 63.5 $25.00 

1/4” Shank Downcut Bit 

192-001-11 3.2 12.7 50.8 $25.00 

192-003-11 4.0 12.7 50.8 $25.00 

192-005-11 4.75 19.0 50.8 $25.00 

192-007-11 6.35 19.0 50.8 $25.00 

192-008-11 6.35 25.4 63.5 $25.00 


1/2” Shank Upcut Bit 

191-501-11 8.0 25.4 76.2 $75.00 

191-503-11 9.5 31.7 76.2 $75.00 

191-505-11 12.7 31.7 76.2 $75.00 

191-506-11 12.7 38.1 89.0 $89.00 

191-507-11 12.7 50.8 101.5 $99.00 

1/2” Shank Downcut Bit 

192-501-11 8.0 25.4 76.2 $75.00 

192-503-11 9.5 31.7 76.2 $75.00 

192-505-11 12.7 31.7 76.2 $75.00 

192-506-11 12.7 38.1 89.0 $89.00 

192-507-11 12.7 50.8 101.5 $109.00 

CMT TM MORTISE & PLANER BITS 

D 

D 

X 

X 

Order no. D X Price 

1/4” Shank without bearing 

801-128-11 12.7 7.9 $22.00 

801-127-11 12.7 19.0 $22.00 

801-158-11 15.8 19.0 $25.00 

801-190-11 19.0 19.0 $25.00 

801-317-11 31.7 12.7 $30.00 

1/2” Shank without bearing 

801-627-11 12.7 19.0 $22.00 

801-690-11 19.0 19.0 $25.00 

801-818-11 31.7 5.7 $30.00 

801-817-11 31.7 12.7 $30.00 

1/4” Shank with bearing 

801-127-11B 12.7 19.0 $28.00 

801-158-11B 15.8 19.0 $31.00 

801-190-11B 19.0 19.0 $32.00 

1/2” Shank with bearing 

801-818-11B 31.7 5.7 $36.00 

801-817-11B 31.7 12.7 $40.00 

Spare Parts 

791-010-00 12.7mm bearing $6.00 

791-009-00 15.8mm bearing $8.00 

791-004-00 19mm brg 1/4” bore $6.00 

791-015-00 31.7mm bearing $14.00 

541-001-00 Stopcollar 1/4” shank $5.00 

541-002-00 Stopcollar 1/2” shank $5.00 

X 

D 

CMT TM FLUSH 

TRIM BIT 


1/4” Shank 

806-096-11 9.5 12.7 $27.00 

806-095-11 9.5 25.4 $27.00 

806-127-11 12.7 25.4 $29.00 

806-128-11 12.7 12.7 $29.00 

806-064-11 6.35 25.4 $34.00 

1/2” Shank 

806-627-11 12.7 25.4 $29.00 

806-628-11 12.7 12.7 $29.00 

806-629-11 12.7 38.1 $39.00 

806-630-11 12.7 50.8 $42.00 

Spare Parts 

791-002-00 9.5mm bearing $7.00 

791-003-00 12.7mm bearing $6.00 

990-058-00 Bearing Screw $2.00 

CMT TM SUPER DUTY FLUSH TRIM BITS 

X 


1/4” Shank 

806-191-11 19.0 25.4 $39.00 

1/2” Shank 

806-691-11 19.0 25.4 $39.00 

806-690-11 19.0 50.8 $49.00 

Spare Parts 

791-004-00 19mm bearing $6.00 

990-058-00 Bearing Screw $2.00 

CMT TM 3 IN 1 

FLUSH TRIM BIT 


1/4” Shank 

807-128-11 12.7 12.7 $30.00 

807-190-11 19 15.87 $43.00 

1/2” Shank 

807-690-11 19 15.87 $43.00 

Spare Parts 

791-042-00 12.7mm Tri-bearing $16.00 

791-043-00 19mm Tri-bearing $16.00 

990-058-00 Screw 1/8” W $2.00 

6 PIECE PROFILE BIT SET 

A multi-purpose set for any job. Set includes: 

1 chamfer bit, 1 ogee bit, 1 roundover bit, 1 

rabbeting bit, 1 cove bit, 1 round nose bit. All 

bits have 1/2” shanks. 

Order no. 

Price 

800-504-11 $179.00 

X 

X 

D 

D 

D 

CMT TM TWO FLUTE 

STRAIGHT BIT 


1/4” Shank - Short Series 

811-020-11 2.0 4.0 38.0 $23.00 

811-030-11 3.0 8.0 45.0 $23.00 

811-032-11 3.2 9.5 45.0 $25.00 

811-040-11 4.0 10.0 45.0 $25.00 

811-047-11 4.75 12.7 50.8 $25.00 

811-050-11 5.0 12.0 50.8 $25.00 

811-060-11 6.0 16.0 50.8 $25.00 

811-064-11 6.35 19.0 50.8 $25.00 

811-065-11 6.35 19.0 57.2 $25.00 

811-070-11 7.0 18.0 48.0 $25.00 

811-080-11 8.0 20.0 50.8 $25.00 

811-081-11 8.0 25.4 71.5 $28.00 

811-095-11 9.5 19.0 50.8 $28.00 

811-096-11 9.5 25.4 63.5 $28.00 

811-100-11 10.0 20.0 48.0 $28.00 

811-120-11 12.0 20.0 50.0 $28.00 

811-123-11 12.3 25.4 57.2 $28.00 

811-127-11 12.7 19.0 57.2 $28.00 

811-140-11 14.0 20.0 50.0 $28.00 

811-142-11 14.2 14.2 57.2 $28.00 

811-150-11 15.0 20.0 57.2 $28.00 

811-158-11 15.8 19.0 66.7 $28.00 

811-160-11 16.0 20.0 57.2 $28.00 

811-180-11 18.0 20.0 50.0 $28.00 

811-182-11 18.2 25.4 57.2 $28.00 

811-191-11 19.0 20.0 57.2 $28.00 

811-200-11 20.0 20.0 50.0 $28.00 

811-220-11 22.0 20.0 57.2 $28.00 

811-254-11 25.4 19.0 50.8 $32.00 


811-560-11 6.0 19.0 60.3 $29.00 

811-564-11 6.35 19.0 60.3 $29.00 

811-595-11 9.5 25.4 66.7 $29.00 

811-600-11 10.0 25.4 63.5 $29.00 

811-620-11 12.0 25.4 63.5 $29.00 

811-623-11 12.3 25.4 63.5 $29.00 

811-627-11 12.7 25.4 66.7 $29.00 

811-628-11 12.7 25.4 82.5 $30.00 

811-660-11 15.8 25.4 63.5 $30.00 

811-661-11 16.0 25.4 63.5 $30.00 

811-682-11 18.2 25.4 63.5 $30.00 

811-690-11 19.0 25.4 63.5 $30.00 

811-754-11 25.4 31.7 76.2 $37.00 


1/4” Shank - Long Series 

812-032-11 3.2 12.7 50.8 $26.00 

812-060-11 6.0 25.4 60.3 $28.00 

812-064-11 6.35 25.4 60.3 $28.00 

812-080-11 8.0 31.7 60.3 $29.00 

812-095-11 9.5 31.7 63.5 $29.00 

812-100-11 10.0 31.7 60.3 $29.00 

812-120-11 12.0 31.7 60.3 $29.00 

812-127-11 12.7 31.7 70.0 $29.00 

812-140-11 14.0 31.7 60.3 $31.00 

812-150-11 15.0 31.7 66.7 $31.00 

812-158-11 15.8 31.7 70.0 $31.00 

812-160-11 16.0 31.7 66.7 $32.00 


812-595-11 9.5 31.7 73.0 $29.00 

812-600-11 10.0 31.7 70.0 $29.00 

812-611-11 11.1 31.7 82.5 $31.00 

812-620-11 12.0 31.7 70.0 $31.00 

812-627-11 12.7 38.1 79.5 $32.00 

812-628-11 12.7 50.8 89.0 $40.00 

812-660-11 16.0 31.7 70.0 $29.00 

812-690-11 19.0 38.1 82.5 $40.00 

X 

D 

90 CMT ORANGE TOOLS - THE ART OF CUTTING

Didn’t find the router bit you wanted? 

Search online at www.carbatec.com.au for the full range. 


CMT TM PATTERN BITS 


1/4” Shank 

811-081-11B 8.0 25.4 71.5 $30.00 

811-127-11B 12.7 19.0 57.2 $30.00 

812-127-11B 12.7 31.7 70.0 $36.00 

811-142-11B 14.2 14.2 57.2 $35.00 

811-159-11B 15.8 12.7 58.0 $36.00 

811-158-11B 15.8 19.0 66.7 $36.00 

812-158-11B 15.8 31.7 70.0 $36.00 

811-191-11B 19.0 20.0 57.2 $36.00 

1/2” Shank 

811-690-11B 19.0 25.4 63.5 $47.00 

812-690-11B 19.0 38.1 82.5 $47.00 

811-222-11B 22.2 25.4 66.7 $47.00 

Spare Parts 

791-010-00 12.7mm bearing $6.00 

791-009-00 15.8mm bearing $8.00 

791-004-00 19mm brg 1/4” bore $6.00 

791-011-00 19mm brg 1/2” bore $18.00 

791-021-00 22.2mm bearing $7.00 

799-001-00 3/8” x 1/2” bushing $14.00 

541-001-00 Stopcollar 1/4” shanks $5.00 

541-002-00 Stopcollar 1/2” shanks $5.00 

CMT TM ROUND 

NOSE BIT 

Order no. R D X Price 

1/4” Shank 

814-032-11 1.6 3.2 9.5 $26.00 

814-064-11 3.2 6.4 12.7 $27.00 

814-095-11 4.75 9.5 6.4 $27.00 

814-127-11 6.35 12.7 9.5 $27.00 

814-160-11 7.9 15.8 9.5 $28.00 

814-190-11 9.5 19.0 11.5 $30.00 

1/2” Shank 

814-564-11 3.2 6.4 15.9 $37.00 

814-627-11 6.35 12.7 31.7 $38.00 

814-660-11 7.9 15.8 31.7 $45.00 

814-690-11 9.5 19.0 31.7 $45.00 

814-754-11 12.7 25.4 31.7 $58.00 

CMT TM ROUND NOSE BIT WITH BEARING 

X 


1/4” Shank 

814-127-11B 6.35 12.7 9.5 $33.00 

814-160-11B 7.9 15.8 9.5 $37.00 

814-190-11B 9.5 19.0 11.5 $41.00 

1/2” Shank 

814-690-11B 9.5 19.0 31.7 $59.00 

Spare Parts 

791-010-00 12.7mm Bearing 1/4” $6.00 

791-009-00 15.8mm Bearing 1/4” $8.00 

791-004-00 19.0mm Bearing 1/4” $6.00 

791-011-00 19.0mm Bearing 1/2” $18.00 

541-001-00 Stop Collar 1/4” $5.00 

541-002-00 Stop Collar 1/2” $5.00 

X 

R 

R 

X 

D 

D 

D 

CMT TM 90° V GROOVE BIT 


1/4” Shank 

815-064-11 6.35 8.0 $25.00 

815-095-11 9.5 12.7 815-127-11 12.7 12.7 TM$26.00 

1/2” Shank 

815-660-11 15.8 12.7 $33.00 

815-690-11 19.0 15.8 $35.00 

CMT TM 90° V GROOVE 

BIT WITH 

BEARING 


1/4” Shank 

815-127-11B 12.7 12.7 $32.00 

1/2” Shank 

815-690-11B 19.0 15.8 $47.00 

Spare Parts 

791-003-00 12.7mm Bearing $6.00 

791-011-00 19mm Bearing $18.00 

541-001-00 Stop Collar 1/4” Shank $5.00 

541-002-00 Stop Collar 1/2” Shank $5.00 

CMT TM DOVETAIL BITS X 

A° 

D 

Order no. D X A° Price 

1/4” Shank 

818-065-11 6.35 6.35 8° $23.00 

818-064-11 6.35 8.3 7.5° $29.00 

818-079-11 7.9 6.0 18° $29.00 

818-081-11 8.0 9.5 8° $29.00 

818-080-11 8.0 9.5 9° $29.00 

818-096-11 9.5 9.5 9° $29.00 

818-098-11 9.5 9.5 14° $29.00 

818-097-11 9.5 12.7 8° $29.00 

818-111-11 11.1 15.8 8° $29.00 

818-132-11 12.7 10.3 18° $25.00 

818-128-11 12.7 12.7 14° $29.00 

818-130-11 12.7 12.7 14° $25.00 

818-133-11 12.7 16.0 10° $25.00 

818-129-11 12.7 20.6 8° $25.00 

818-142-11 14.2 9.5 14° $29.00 

818-158-11 15.8 22.2 7° $34.00 

818-190-11 19.0 22.2 7° $34.00 

818-191-11 19.0 22.2 14° $34.00 

DOVETAIL BITS WITH BEARING GUIDE 

818-142-11B 14.2 9.5 14° $35.00 

Spare Parts 

791-010-00 12.7mm Bearing $6.00 

541-001-00 Stop Collar 1/4” shank $5.00 

1/2” Shank 

818-564-11 6.35 8.3 7.5° $29.00 

818-580-11 8.0 9.5 9° $36.00 

818-596-11 9.5 9.5 9° $36.00 

818-628-11 12.7 12.7 14° $29.00 

818-658-11 15.8 22.2 7° $36.00 

818-674-11 17.4 25.4 8° $36.00 

818-691-11 19.0 19.0 14° $36.00 

818-690-11 19.0 22.2 7° $36.00 

818-706-11 20.6 31.7 8° $38.00 

X 

X 

D 

D 

CMT TM FLUSH TRIM BIT 

D 

A° 

Order no. D X A° Price 

1/4” Shank 

821-022-11 12.0 12.7 0-22° $23.00 

821-030-11 12.0 12.7 0.30° $23.00 

821-045-11 12.0 12.7 0-45° $23.00 

CMT TM SLOT CUTTERS WITH 

ARBOR & BEARING 

D 

X 

H 

Order no. D X H Price 

1/4” Shank 

822-316-11A 47.6 1.6 12.7 $39.00 

822-320-11A 47.6 2.0 12.7 $39.00 

822-324-11A 47.6 2.4 12.7 $39.00 

822-332-11A 47.6 3.2 12.7 $39.00 

822-340-11A 47.6 4.0 12.7 $39.00 

822-348-11A 47.6 4.8 12.7 $39.00 

822-360-11A 47.6 6.0 12.7 $39.00 

822-364-11A 47.6 6.4 12.7 $39.00 

1/2” Shank 

822-316-11B 47.6 1.6 12.7 $39.00 

822-320-11B 47.6 2.0 12.7 $39.00 

822-324-11B 47.6 2.4 12.7 $39.00 

822-332-11B 47.6 3.2 12.7 $39.00 

822-340-11B 47.6 4.0 12.7 $39.00 

822-348-11B 47.6 4.8 12.7 $39.00 

822-360-11B 47.6 6.0 12.7 $39.00 

822-364-11B 47.6 6.4 12.7 $39.00 

CMT TM SLOT CUTTER BLADES 

WITHOUT ARBOR 

Order no. D X Bore Price 

822-315-11 47.6 1.5 8.0 $25.00 

822-316-11 47.6 1.6 8.0 $20.00 

822-318-11 47.6 1.8 8.0 $20.00 

822-320-11 47.6 2.0 8.0 $20.00 

822-322-11 47.6 2.2 8.0 $20.00 

822-324-11 47.6 2.4 8.0 $20.00 

822-325-11 47.6 2.5 8.0 $20.00 

822-328-11 47.6 2.8 8.0 $20.00 

822-330-11 47.6 3.0 8.0 $20.00 

822-332-11 47.6 3.2 8.0 $20.00 

822-335-11 47.6 3.5 8.0 $20.00 

822-340-11 47.6 4.0 8.0 $20.00 

822-348-11 47.6 4.8 8.0 $20.00 

822-350-11 47.6 5.0 8.0 $20.00 

822-360-11 47.6 6.0 8.0 $20.00 

822-364-11 47.6 6.4 8.0 $20.00 

X 

CMT WOODWORKING CUTTING TOOLS - A STEADY COMMITMENT! 

91


CMT TM SLOT CUTTER ARBORS 

Order no. 

Price 

1/4” Shank 

824-064-00 Slot Cutter Arbor w/o bearing $15.00 

824-064-10 Slot Cutter Arbor with bearing $19.00 

1/2” Shank 

824-127-00 Slot Cutter Arbor w/o bearing $15.00 

824-127-10 Slot Cutter Arbor with bearing $19.00 

Spare Parts 

791-005-00 22mm Bearing $6.00 

541-501-00 4mm Spacer $3.00 

541-500-00 3mm Spacer $3.00 

990-020-00 Nut for arbor $2.00 

CMT TM SLOT CUTTER ARBORS 

Order no. 

1/4” Shank 

824-061-10 

CMT TM OVOLO BITS 

D 

X 

CMT TM RABBETING 

BITS WITH BALL 

BEARING GUIDE 

Slot cutter with bearing & stop 

collar 

X 

R 

D 

H 

Price 

$19.00 


1/4” Shank 

827-050-11 5.0 21.0 12.0 $32.00 

827-060-11 6.0 23.0 12.0 $33.00 

827-095-11 9.5 31.7 13.8 $36.00 

827-127-11 12.7 38.1 18.5 $42.00 

1/2” Shank 

827-560-11 6.0 23.0 12.0 $32.00 

827-595-11 9.5 31.7 13.8 $37.00 

827-627-11 12.7 38.1 18.5 $41.00 

827-660-11 15.9 44.5 22.2 $50.00 

827-690-11 19.0 50.7 24.5 $59.00 

827-722-11 22.2 57.1 28.5 $73.00 

827-754-11 25.4 63.5 33.3 $89.00 


1/4” Shank 

835-317-11 31.7 12.7 9.5 $33.00 

835-350-11 34.9 12.7 12.7 $37.00 

1/2” Shank 

835-817-11 31.7 12.7 9.5 $33.00 

835-850-11 34.9 12.7 12.7 $37.00 

835-851-11 34.9 19.0 9.5 $40.00 

Spare Parts 

791-002-00 9.5mm Bearing $7.00 

791-003-00 12.7mm Bearing $6.00 

990-058-00 Bearing Screw $2.00 

CMT TM RABBETING BITS 

D 

H 

X 


1/4” Shank 

835-001-11 34.9 12.7 3.2-12.7 $69.00 

1/2” Shank 

835-501-11 34.9 12.7 3.2-12.7 $69.00 

835-502-11 34.9 19.0 3.2-12.7 $69.00 

Spare Parts 

791-703-00 Set of 6 Bearings $49.00 

CMT TM CHAMFER BIT WITH BALL 

BEARING GUIDE 

D 

X 

A° 

Order no. A D X Price 

1/4” Shank 

836-130-11 15.0 19.0 12.7 $29.00 

836-190-11 25.0 22.2 12.7 $30.00 

836-280-11 45.0 31.7 11.5 $32.00 

836-420-11 45.0 45.0 18.0 $41.00 

1/2” Shank 

836-920-11 45.0 45.0 18.0 $48.00 

836-950-11 45.0 65.0 26.0 $69.00 

Spare Parts 

791-003-00 12.7mm Bearing $6.00 

990-058-00 Screw for Bearing 1/8W $2.00 

CMT TM COVE BIT WITH BALL 

BEARING GUIDE 

D 

12.7mm 

X 

R 


1/4” Shank 

837-190-11 4.75 22.2 12.7 $31.00 

837-222-11 6.35 25.4 12.7 $35.00 

837-254-11 7.95 28.6 12.7 $35.00 

837-286-11 9.5 31.7 12.7 $41.00 

837-350-11 12.7 38.1 15.5 $45.00 

1/2” Shank 

837-690-11 4.75 22.2 12.7 $33.00 

837-722-11 6.35 25.4 12.7 $36.00 

837-754-11 7.95 28.6 12.7 $39.00 

837-786-11 9.5 31.7 12.7 $40.00 

837-850-11 12.7 38.1 15.5 $45.00 

837-950-11 15.9 44.5 18.5 $54.00 

837-951-11 19.0 50.7 22.2 $65.00 

Spare Parts 

791-003-00 12.7mm Bearing $6.00 


CMT TM ROUNDING 

OVER BIT WITH 

BALL BEARING GUIDE 

X 

R 

D 

H 

Order no. R D X H Price 

1/4” Shank 

838-160-11 1.6 15.9 12.7 9.5 $32.00 

838-190-11 3.2 19.1 12.7 9.5 $33.00 

838-222-11 4.75 22.2 12.7 9.5 $35.00 

838-254-11 6.35 25.4 12.7 9.5 $37.00 

838-285-11 7.95 28.6 12.7 9.5 $37.00 

838-317-11 9.5 31.7 14.0 9.5 $42.00 

838-380-11 12.7 38.1 19.0 9.5 $48.00 

838-445-11 15.9 44.5 22.2 9.5 $58.00 

1/2” Shank 

838-754-11 6.35 25.4 12.7 9.5 $38.00 

838-817-11 9.5 31.7 14.0 9.5 $43.00 

838-880-11 12.7 38.1 19.0 9.5 $50.00 

838-945-11 15.9 44.5 22.2 9.5 $59.00 

838-990-11 19.0 50.7 25.4 9.5 $62.00 

838-991-11 22.2 57.1 28.5 9.5 $83.00 

838-992-11 25.4 63.5 33.3 9.5 $102.00 

838-993-11 28.6 76.2 38.1 19.0 $142.00 

838-994-11 31.75 82.5 44.4 19.0 $144.00 

Spare Parts 

791-003-00 12.7mm Bearing $6.00 

791-004-00 19mm bearing $6.00 

990-058-00 Screw 1/8”W suit 1/2” $2.00 

990-058-00 Screw 1/8”W suit 3/4” $2.00 

CMT TM BEADING BIT WITH BALL 

BEARING GUIDE 

D 

9.5mm 

X 

R 


1/4” Shank 

839-160-11 1.6 15.9 12.7 $35.00 

839-190-11 3.2 19.1 12.7 $34.00 

839-222-11 4.75 22.2 12.7 $37.00 

839-254-11 6.35 25.4 12.7 $39.00 

839-285-11 7.95 28.6 12.7 $41.00 

839-317-11 9.5 31.7 14.0 $45.00 

839-380-11 12.7 38.1 19.0 $49.00 

839-445-11 15.9 44.5 22.2 $63.00 

1/2” Shank 

839-754-11 6.35 25.4 12.7 $38.00 

839-817-11 9.5 31.7 14.0 $45.00 

839-880-11 12.7 38.1 19.0 $52.00 

839-945-11 15.9 44.5 22.2 $62.00 

839-990-11 19.0 50.7 25.4 $62.00 

839-991-11 22.2 57.1 28.5 $89.00 

839-992-11 25.4 63.5 33.3 $96.00 

Spare Parts 

791-002-00 9.5mm Bearing $7.00 

990-058-00 Screw 1/8”W $2.00 


Didn’t find the router bit you wanted? 

Search online at www.carbatec.com.au for the full range. 


CMT TM ROMAN 

OGEE BIT WITH 

BALL BEARING 

GUIDE 


1/4” Shank 

840-270-11 4.0 28.7 11.5 $39.00 

840-350-11 6.35 38.1 17.3 $44.00 

1/2” Shank 

840-770-11 4.0 28.7 11.5 $39.00 

840-850-11 6.35 38.1 17.3 $44.00 

Spare Parts 

791-003-00 12.7mm Bearing $6.00 


CMT TM MOULDING BITS 

WITH BALL BEARING GUIDE 

D 

D 

X 

X 

X 

R 

X 

D 

D 

CMT TM REVERSE GLUE JOINT BIT 

D 

TM 

Order no. D Mid Joint Max Joint Price 

1/2” Shank 

855-501-11 44.4 15.0 30.0 $69.00 

CMT TM 45° LOCK MITRE JOINT BIT 

Order no. D X A Price 

1/2” Shank 

855-503-11 69.8 31.7 45° $109.00 

855-504-11 50.8 22.2 45° $89.00 

CMT TM VERTICAL RAISED PANEL BIT 

D 

X 

A B C 

Min 

Max 

Order no. D Min Max X Price 

1/2” Shank 

A. 890-601-11 38 15 18 38 $79.00 

B. 890-602-11 38 15 18 38 $79.00 

C. 890-603-11 38 15 18 38 $79.00 

CMT TM RAIL & STILE SET 

WITH BALL BEARING GUIDE 

D 

Min 

Max 

A B C 

A. B. 

C. 


1/2” Shank 

A. 855-901-11 23.8 35.0 $59.00 

B. 855-902-11 27.0 41.0 $59.00 

C. 856-501-11 47.5 28.5 $69.00 

Spare Parts 

791-003-00 12.7mm bearing $6.00 

990-058-00 Screw 1/8”W $2.00 

CMT TM EDGE BANDING BIT SET 

D 

A° 

Order no. D I A Price 

1/2” Shank 

855-510-11 40 25.4 30° $109.00 

Spare Parts 

990-423-00 Shield Ø12.7mm $2.00 

791-018-00 Bearing Ø15.8mm $10.00 

990-058-00 Screw TCEI 1/8W $2.00 

991-057-00 Hex Key 3/32” $6.00 

CMT TM DRAWER LOCK BIT 

D 

X 


1/4” Shank 

855-002-11 31.7 12.7 $49.00 

1/2” Shank 

855-502-11 50..8 12.7 $65.00 

CMT TM RAISED PANEL BIT WITH BALL 

BEARING GUIDE 

D 

Min 

Max 

A. 

B. 

A2. B2. 

D. 

C. 

C2. 

Order no. D Min Max Y Price 

1/2” Shank 

A. 890-501-11 82.5 15 18 7.9 $99.00 

B. 890-502-11 82.5 15 18 7.9 $99.00 

C. 890-503-11 82.5 15 18 7.0 $99.00 

A2. 890-504-11 89.0 18 20 9.5 $109.00 

B2. 890-505-11 89.0 18 20 9.5 $109.00 

C2. 890-506-11 89.0 18 20 9.5 $109.00 

D. 890-507-11 89.0 15 20 9.5 $109.00 

Spare Parts 

791-003-00 12.7mm Bearing $6.00 


Y 

Order no. D Min Max Price 

1/2” Shank 

A. 891-501-11 44.4 18.0 22.0 $129.00 

B. 891-502-11 44.4 18.0 22.0 $129.00 

C. 891-503-11 44.4 18.0 22.0 $129.00 

Spare Parts 

822-003-11 Slot Cutter $25.00 

791-005-00 Bearing 22.0mm $6.00 

541-510-00 0.3mm Spacer $2.00 

541-517-00 0.5mm Spacer $2.00 

CMT TM ROUTER COLLET EXTENSION 

Fit any 1/2” collet router and then extends 

all 1/2” shank or 1/4” shank router bits. The 

extension adds 2-1/2” (63mm) to your router 

bits length. Recommended for router bits 

with diameters of 40mm or less. This product 

should only be used with variable speed 

routers. 


796-001-00 Suits 1/2” shank bits $39.00 

796-001-01 Suits 1/4” shank bits $39.00 

NEW 

CMT FLEXIBLE TEMPLATE FOR 

CURVED AND ARCHED ROUTING 

Easy to use on any kind of wooden panels, 

MDF or chipboard for creating forms, arcs 

and curved elements easily and rapidly. 

Order no. 

Price 

CMT1200 $89.00 

CMT WOODWORKING CUTTING TOOLS - A STEADY COMMITMENT! 

93


Order no. Dia. Teeth β α Bore Pins K P Price 

RIPPING BLADES 

290-250-24M 250 24 10° 20° 30 A/B/D 2.8 1.8 $42.00 

293-024-12M 300 24 10° 20° 30 A/B/D 2.8 1.8 $59.00 

COMBINATION BLADES 

285-040-10M 250 40 10° 15° 30 A/B/D 3.2 2.2 $52.00 

285-048-10M 250 48 10° 15° 30 A/B/D 3.2 2.2 $59.00 

285-060-10M 250 60 15° 10° 30 A/B/D 3.2 2.2 $65.00 

285-048-12M 300 48 10° 15° 30 A/B/D 3.2 2.2 $75.00 

FINE CUT OFF BLADES 

285-080-10M 250 80 15° 5° 30 A/B 3.2 2.2 $85.00 

285-580-10M 250 80 15° 10° 30 A/B 2.5 1.8 $99.00 

285-072-12M 300 72 15° 5° 30 A/B 3.2 2.2 $89.00 

285-096-12M 300 96 15° 5° 30 A/B 3.2 2.2 $109.00 

MELAMINE & FINISHING BLADES 

283-080-10M 250 80 40° -2° 30 A/B/D 3.2 2.2 $99.00 

283-096-12M 300 96 40° 2° 30 A/B/D 3.2 2.2 $115.00 

SCRIBING BLADES 

289-100-20H 100 10+10 Flat - 20 - 2.8-3.6 - $109.00 

289-120-24H 120 12+12 Flat - 20 - 2.8-3.6 - $109.00 

289-120-24K 120 12+12 Flat - 22 - 2.8-3.6 - $109.00 

MELAMINE & FINISHING BLADES TRAPEZOIDAL TOOTH 

281-080-10M 250 80 T/T 10° 30 A/B 3.2 2.2 $89.00 

281-096-12M 300 96 T/T 10° 30 A/B 3.2 2.2 $109.00 


NON-FERROUS METAL CUTTING BLADE 

297-080-10M 250 80 45° -6° 30 A/B/D 2.8 2.2 $89.00 

297-096-12M 300 96 45° -6° 30 A/B/D 2.8 2.2 $105.00 

Order no. Dia. Teeth Grind Kerf Bore Price 

PRECISION DADO BLADE 

230-520-06 150 20 - 6.35-23.0 - $195.00 

230-524-08 200 24 -5° 6.35-23.0 5/8” $219.00 

230-524-08M 200 24 -5° 6.35-23.0 30mm $219.00 

Order no. Dia. Teeth Grind Kerf Bore Price 

LOW NOISE CHROME COATED 

281-680-10M 250 80 TCG 3.2 30mm $99.00 

281-672-12M 300 72 TCG 3.2 30mm $99.00 


INDUSTRIAL FINE CUT OFF BLADES TEFLON COATED 

210-080-10M 250 80 40° 5° 30 - 3.2 2.2 $99.00 

210-096-12M 300 96 40° 5° 30 - 3.2 2.2 $119.00 

281-580-10M 250 80 TCG 10° 30 COMB13 3.2 2.2 $99.00 

281-696-12M 300 96 TCG 10° 30 COMB13 3.2 2.2 $119.00 

285-640-10M 250 40 10” ATB 3.2 30mm $59.00 

285-648-12M 300 54 10” ATB 3.2 30mm $82.00 

Order no. OD ID Thickness Price 

SAW BLADE REDUCING WASHERS 

299-221-00 20 12.7 1.2 $4.00 

299-222-00 20 16.0 1.2 $4.00 

299-211-00 30 15.87 1.4 $4.00 

299-223-00 30 16.0 1.4 $4.00 

299-226-00 30 16.0 2.0 $4.00 

299-224-00 30 20.0 1.4 $4.00 

299-227-00 30 20.0 2.0 $4.00 

299-225-00 30 25.0 1.4 $4.00 

d 

D 

299-228-00 30 25.0 2.0 $4.00 


ULTRA ITK COMBINATION BLADES THIN KERF - TRIPLE CUT 

271-250-24M 250 24 15° 20° 30 - 1.7 1.2 $55.00 

271-250-42M 250 42 15° 20° 30 - 1.7 1.2 $65.00 

271-300-45M 300 45 15° 20° 30 - 2.4 1.8 $79.00 

ULTRA ITK FINE CUT OFF BLADES THIN KERF - TRIPLE CUT 

272-250-60M 250 60 15° 20° 30 - 1.7 1.2 $79.00 

272-300-72M 300 72 15° 20° 30 - 2.4 1.8 $95.00 

ULTRA ITK MELAMINE & FINISHING BLADES - THIN KERF 

273-250-80M 250 80 40° 15° 30 - 1.7 1.2 $97.00 

299-212-00 30 25.4 2.0 $4.00 

299-229-00 32 30.0 2.0 $4.00 

CARBA-TEC ® UNIVERSAL ROUTER BASE PLATE 

Adapts to most router base plates to allow use of USA style 

template followers, shown fitted but not included. 

Template following gives greater accuracy 

and repeatability. Brass bush not inc. 220g. 

Order no. 

Price 

BPA-1 $29.00 



PLANING BIT 

Tungsten tipped. 

C 

6.35MM SHANK. STRAIGHT BITS. 

Tungsten tipped, two flutes. 

12.7MM SHANK. STRAIGHT BITS 

Tungsten tipped, two flute. 

B 

Order no. A (mm) B (mm) C (mm) Price 

7942 38.1 50.00 12.7 $33.00 

Order no. 

107011 2.4 12.7 6.35 $17.00 

107021 3.2 12.7 6.35 $18.00 

107031 4.0 12.7 6.35 $19.00 

107039 4.8 12.7 6.35 $20.00 

CT-208 6.35 16.0 6.35 $12.00 

CT-X208 6.35 25.4 6.35 $12.00 

CT-210 7.9 19.0 6.35 $12.00 

CT-210M 10.0 19.0 6.35 $12.00 

CT-X212 9.5 25.4 6.35 $12.00 

CT-X216 12.7 25.4 6.35 $14.00 

CT-224 19.0 19.0 6.35 $17.00 

X Denotes extra long cutting length - are not guaranteed against 

breakage. 

Order no. 

CT-1406M 6.0 16.0 12.7 $12.00 

CT-1408 6.35 16.0 12.7 $12.00 

CT-1410 7.9 19.0 12.7 $12.00 

CT-1412 9.5 25.4 12.7 $12.00 

CT-1410M 10.0 25.4 12.7 $14.00 

CT-1414 11.1 31.8 12.7 $14.00 

CT-1412M 12.0 31.8 12.7 $14.00 

CT-1416 12.7 31.8 12.7 $14.00 

CT-X1416 12.7 50.8 12.7 $17.00 

CT-X1413M 13.0 50.8 12.7 $19.00 

CT-1416M 16.0 38.1 12.7 $19.00 

CT-X1416M 16.0 50.8 12.7 $19.00 

CT-1417M 17.0 38.1 12.7 $23.00 

CT-X1418M 18.0 50.8 12.7 $23.00 

CT-X1419M 19.0 50.8 12.7 $23.00 

CT-1424 19.0 38.1 12.7 $23.00 

CT-1432 25.4 38.1 12.7 $25.00 

X Denotes extra long cutting length - are not guaranteed against 

breakage. 

FLUSH TRIM & PATTERN 

FOLLOWING BITS 

With bearing guide, tungsten tipped, two 

flutes. 

B 

C 

Cutting 

Dia.(mm) 

Cutting 

Dia. 

Cutting 

Length (mm) 

Cutting 

Length 

A 

Shank 

Dia.(mm) 

Shank 

Dia. 

Price 

Price 

Order no. A (mm) B (mm) C (mm) Price 

CT-151007 6.35 25.4 6.35 $12.00 

CT-8012B 9.5 25.4 6.35 $16.00 

CT-8016B 12.7 25.4 6.35 $16.00 

CT-8016B-1/2 12.7 25.4 12.7 $16.00 

CT-X8016B-1/2 12.7 38.0 12.7 $17.00 

CT-X8035B-1/2 22.0. 35.0 12.7 $28.00 

A 

BISCUIT JOINING SET 

Set includes bearings 

(22mm, 26mm, 30mm) to 

vary the depth of cut to suit 

popular size biscuits 


705921 Set with 1/4” Shank $51.00 

705941 Set with 1/2” Shank $51.00 

BRASS PILOTED 

ROUNDOVER BITS 

C 

R 

Order no. A (mm) B (mm) R (mm) Price 

331011 8.0 9.5 1.6 $21.00 

331021 11.0 9.5 3.2 $21.00 

ROUNDOVER BITS 

C 

Order no. B (mm) C (mm) R (mm) Price 

CT-504B 12.7 6.35 3.2 $20.00 

CT-506B 12.7 6.35 5.0 $21.00 

CT-508B 12.7 6.35 6.35 $23.00 

CT-510B 12.7 6.35 8.0 $25.00 

CT-512B 16.0 6.35 9.5 $29.00 

CT-516B 19.0 6.35 12.7 $36.00 

CT-512B-1/2 16.0 12.7 9.5 $29.00 

CT-516B-1/2 19.0 12.7 12.7 $36.00 

CT-520B-1/2 22.2 12.7 16.0 $39.00 

CT-524B-1/2 25.4 12.7 19.0 $45.00 

CT-532B-1/2 31.8 12.7 25.4 $63.00 

2 PIECE MATCHING OGEE RAIL & 

STILE SET 

C 

C 

Order no. 

A 

A 

(mm) 

D 

B 

B 

(mm) 

C 

(mm) 

SOLID EDGE SET 

This set allows you to put solid wood edging 

on plywood or MDF quickly and easily. 1/2” 

Shank. 

Order no. 

Price 

CT-7733 $110.00 

B 

B 

A 

D 

(mm) 

R 

D 

B 

Price 

CT-0201 41.0 25.4 12.7 38.0 $73.00 

SPIRAL UPCUT 

STARTER SET 

Set includes three 

solid micrograin 

carbide bits that cut 

quickly and smoothly 

with a long-life cutting 

edge. These upcut 

spiral bits produce a 

clean and accurate 

cut with minimal chatter. 

Includes 1/4”, 3/8” 

and 1/2” diameters. 

Order no. 

Price 

SRB-200 $115.00 

LOCK MITRE BITS 

Shank diameter 12.7mm. 

Order no. Board Thick. Dia. Price 

CTML-38-1/2 9.5-16mm 38mm $55.00 

CTML-70-1/2 12-28mm 70mm $66.00 

CARBA-TEC ® 12 PIECE ROUTER BIT SET 

A selection of commonly utilised router bits. 

Some of these include straight, chamfer, 

roundover, and slot cutting bits all with 1/2” 

shanks. 

Order no. 

Price 

CT-1212PCE $52.00 

SOLID 

BRASS 

ROUTER BUSHING SET 

Set includes 8 bushes to suit router bases 

with 30mm hole. Outside diameters include: 

5/16” 3/8”, 7/16”, 1/2”, 39/64”, 13/16”, 1” 

and 1-3/8”.480g. 

Order no. 

Price 

RM-9 $39.00 

INLAY KIT 

Make the pattern and 

route around the 

template. Then fit 

the larger collar 

over the bush and 

trace the template. This 

will leave a recess for the inlay 

. If you’ve done it correctly the 

inlay or repair piece will fit perfectly. Supplied 

with router bit. 90g. 

Order no. 

Price 

BIK-30 $44.00 


95

Drilling & Boring 

CMT TM BRAD 

POINT WOOD 

DRILL SET 

Hardened carbon 

steel, made in Germany. 

These bits 

have the finest cutting 

edges you will 

ever use, and range 

from 3mm to 10mm. 

280g. 

Order no. 

Price 

517-002-00 $19.00 

HIGH SPEED 

STEEL DRILL 

SET 

Highest quality 

set contains 

drills from 1 to 

10mm in 1/2mm 

steps. 710g. 

COLT BORING TOOLS 

Made in Germany, Colt drills are made for 

professional results everytime. We know 

that you can buy drills cheaper but Miebach 

delivers quality and value that is unparalleled. 

Try a set and you will agree. 

COLT TWINLAND BRAD 

POINT DRILLS 

Available in two sets, these 

bits are made from quality 

HSS and are designed for 

value. Double flute design 

cuts faster and cleaner 

reducing blow out. 

Five piece set includes 4, 

5, 6, 8 & 10mm drills. 

Eight piece set includes 

3, 4, 5, 6, 7, 8, 9 & 

10mm drills. 


COLT-10700410 5 Piece Set $12.00 

COLT-10700310 8 Piece Set $19.00 

CMT TM BRAD POINT DRILLS HIGH 

SPEED STEEL 2 FLUTES 

Order no. Dia. Length Shank Price 

516-020-51 2mm 49mm 2mm $8.00 

516-025-51 2.5mm 57mm 2.5mm $8.00 

516-030-51 3mm 61mm 3mm $8.00 

516-035-51 3.5mm 70mm 3.5mm $9.00 

516-040-51 4mm 75mm 4mm $10.00 

516-045-51 4.5mm 80mm 4.5mm $11.00 

516-050-51 5mm 86mm 5mm $12.00 

516-055-51 5.5mm 93mm 5.5mm $12.00 

516-060-51 6mm 93mm 6mm $14.00 

516-070-51 7mm 109mm 7mm $15.00 

516-080-51 8mm 117mm 8mm $16.00 

516-090-51 9mm 125mm 9mm $21.00 

516-100-51 10mm 133mm 10mm $25.00 

Order no. 

Price 

SCT-009 $52.00 

21 PIECE 

METRIC BRAD 

POINT BIT 

SET 

Made from HSS 

and titanium 

nitride coated. 

Set includes 21 

brad point drills 

from 3 to 13mm 

in 0.5mm steps. 

1.3kg. 

Order no. 

Price 

BPD-21PCE $83.00 

PLASTIC DRILL STOPS 

This pair of stops fits all drill 

bits from 3mm -13mm. The 

smaller one takes bits from 

3mm-6mm, and the larger 

takes 6mm-13mm bits. Designed 

with double-ended 

collets inside threaded 

sleeves. Made in USA. 30g. 

Order no. 

Price 

86K65-01 $7.00 

SPIRAL PUSH DRILL 

Accepts drill bits from 0.3 to 

1.6mm. Unlike every other one 

of these that we have tested 

this one runs straight and is a 

delight to use. Can be operated 

with one or two hands. 

Overall length: 195mm. 65g. 

Order no. 

Price 

CT-191440 $15.00 

COLT PRO BRAD POINT DRILLS 

Available in two sets, these bits are made 

from hiqh quality HSS and are designed 

to cut. Double flute design cuts faster and 

cleaner reducing blow out. Five piece drill set 

includes; 4, 5, 6, 8 & 10mm drills. 

Seven piece drill set includes; 3, 4, 5, 6, 7, 8, 

9 & 10mm drills. 


COLT-10600410 5 Piece set $35.00 

COLT-10600412 7 Piece set $75.00 

13 PIECE BRAD POINT DRILL SET 

Tungsten carbide tipped with centre point 

and spurs, these high quality bits give a 

clean cut in wood. Ideal for doweling or 

any drilling that requires fast, clean cutting. 

This 13 piece deluxe set comes in a handy 

wooden storage case, and unlike other sets 

selling for about $30, this one contains all of 

the popular sizes, 1/8”, 5/32”, 3/16”, 7/32”, 

1/4”, 9/32”, 5/16”, 11/32”, 3/8”, 13/32”, 7/16”, 

15/32” and 1/2”. 550g. 

Order no. 

Price 

BPD-13 $41.00 

170 PIECE TITANIUM NITRIDE DRILL 

BIT CASSETTE 

Titanium nitride is a very hard coating that 

extends the length of time between sharpenings. 

Set contains 170 quality hss titanium 

nitride coated drill bits in the following sizes; 

1.0mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 

3.5mm, 4.0mm, 4.5mm, 5.0mm, 5.5mm, 

6.0mm, 6.5mm 7.0mm, 7.5mm, 8.0mm, 

8.5mm 9.0mm, 9.5mm, 10mm. 4.1kg. 

Order no. 

Price 

BDK-170T $83.00 

VIX STYLE BITS 

Speedy, accurate drilling tool with self-centring 

abilities. Saves time drilling holes for 

hinges and striker plates. Outer casing retracts 

when VIX BIT is inserted into countersunk 

hole, drill bit is then located in the centre 

of the countersunk hole. These bits make 

precise positioning of all hardware a breeze. 


VB-3 For #3 & #4 screws $16.00 

VB-5 For #5 & #6 screws $16.00 

VB-9 For #8 #9 & #10 screws $16.00 



10 PIECE MICRO DRILL SET 

All with 2.3mm shanks. Sizes include: 0.5, 

0.6, 0.8, 1.0, 1.2, 1.3, 1.5, 1.6, 2.0 and 

2.2mm. 30g. 

Order no. 

Price 

MDS-10PCE $13.00 

20 PIECE MICRO DRILL SET 

Set includes: 0.3, 0.35, 0.4, 0.45, 0.5, 0.55, 

0.6, 0.65, 0.7, 0.75, 0.8, 0.85, 0.9, 0.95, 1.0, 

1.2, 1.3, 1.4, 1.5 and 1.6mm. 40g. 

Order no. 

Price 

MDS-20PCE $13.00 

VERITAS ® SET OF 7 AUGER GIMLETS 

Ideal for starting screws, auger gimlets have 

a tapered screw tip and an auger body. The 

seven sizes in the set range from 5/64” to 

just over 3/16” (2mm to 5mm), which will 

handle the pre-drill for screw sizes #2 to #9. 

They are particularly useful for short screws 

or screws in awkward places, both of which 

present problems for power pre-drilling. In 

tempered steel, ferro-blacked in the traditional 

manner. 

Order no. 

Price 

33J20-01 $19.00 

6 PIECE SPADE 

SET IN NYLON 

ROLL 

This handy set 

of 6 spade 

bits have 

hex shanks. 

Presented in 

a nylon roll for convenient 

storage. Set includes 10, 12, 

16, 18, 20 and 25mm spade bits. Excellent 

value. 275g. 

Order no. 

Price 

SPADE-6NR $16.00 

EXPANDING BIT 

Easy, positive 

adjustment for 

hole diameter (22 - 

76mm). Fully heat 

treated for longer 

life. For use in drill 

presses only. 210g. 

Made in Japan. 

Order no. 

Price 

Z-2052 $52.00 

SMALL 

& LARGE 

REAMERS 

The small 

r e a m e r 

(3/16” to 

3/4”) is useful 

to rustic 

furniture 

makers for back-tapering holes for throughtenon 

wedging (see diagram), as well as for 

general tenon tapering, being complementary 

to our pro taper reamer (05J61-01) because 

of the overlapping size range. Firsttime 

Windsor chairmakers will find the large 

reamer (3/16” to 1-3/16”) indispensable for 

tapering leg sockets. The bits are 3-3/8” and 

5-1/2” overall respectively with a 5/16” hex 

shank. The included angle of 12.8° on both 

reamer bodies matches the tenons made 

with the Veritas® Tapered Tenon Cutters. Designed 

for use in an electric drill, these tools 

may also be used in a traditional brace with 

an adapter. 


05J62-05 Small $20.00 

05J62-01 Large $24.00 

5 PIECE TILE DRILL 

SET 

This fantastic set give you 

all of the sizes needed to 

drill tile or ceramic material. 

Save by purchasing 

as a set. Spade shaped 

drills work quickly and effectively. 

Set includes: 4, 5, 6, 8 and 10mm 

bits. 145g. 

Order no. 

Price 

GTD-5PCE $29.00 

CHUCK EXTENDER 

Hand drills are convenient but often are limited 

in use because the bulk of the drill body 

interferes with their utility. This 14” chuck 

extender with 3/8” capacity keyed chuck 

makes it possible to do many more things 

with a hand drill. With it you can drill (or drive 

screws) in areas that would normally be unreachable. 

It also allows you to use a number 

of accessories that would be unmanageable 

if chucked directly in a drill. 

Order no. 

Price 

09A01-60 $25.00 

MAXICUT FORSTNER BITS 

The one of a kind Rota Stop system give a 

firm and positive lock in your chuck or extension 

as well as a quick release. This rock solid 

holding feature equals more accurate work. 

Designed to cut instead of grind these bits 

are well worth the price difference. Coupled 

with the MAXICUT extension, shown below, 

these bits can also be used in lathes when 

drilling on end grain. Set includes: 12, 16, 

19, 22 and 25mm. Made in Germany. 750g. 

Order no. 

Price 

COLT-10801535 5 Set $169.00 

1MT Rota 

COLT-10800100 Stop Ext. $59.00 

2MT Rota 

COLT-10800200 Stop Ext. $59.00 

KREG SHELF PIN JIG 

If you’re adding shelf pin holes to an existing 

piece of furniture or building shelves from 

scratch, this Jig is the perfect tool for the job. 

Unlike other shelf pin guides, the Kreg Shelf 

Pin Jig features hardened steel drill guides 

which ensure precise and straight drilling, so 

you get solid 4-corner secure shelving. 

Order no. 

Price 

KR-KMA3200 $45.00 


97


5 PIECE BIT SET (METRIC) 

Set includes 15mm, 20mm, 25mm, 30mm, 

and 35mm bits. 630g. 

Order no. 

Price 

FSB-5PCE-M $20.00 

16 PIECE SAW TOOTH BIT SET 

(IMPERIAL) 

This 16 piece set of saw tooth and bits 

comes in a blow moulded case and contains 

1/4” to 7/8” bits in 1/8” increments. Also in 

the set are 1” to 21/8” saw tooth bits in 1/8” 

increments. 2.56kg. 

Order no. 

Price 

STB-16PCE $54.00 

16 PIECE SAW TOOTH BIT SET 

(METRIC) 

This 16 piece set of forstner style bits comes 

in a blow moulded case and contains 6, 10, 

13, 16, 19, 22, 25, 28, 32, 35, 38, 41, 44, 48, 

51, and 54mm forstner style bits. 2.56kg. 

Order no. 

Price 

STB-16PCE-M $54.00 

16 PIECE FORSTNER BIT SET 

(IMPERIAL) 


in a blow moulded case and contains 1/4” to 

21/8” in 1/8” increments. 2.56kg. 

Order no. 

Price 

FSB-16PCE $54.00 

16 PIECE FORSTNER BIT SET 

(METRIC) 


in a blow moulded case and contains 6, 10, 

13, 16, 19, 22, 25, 28, 32, 35, 38, 41, 44, 48, 

51, and 54mm forstner style bits. 2.56kg. 

Order no. 

Price 

FSB-16PCE-M $54.00 

CMT TM TCT FORSTNER STYLE BITS 

Precision balanced centre point, shank 10 x 

60mm, L=90mm, *Shank =10 x 50mm. 

Order no. Diameter (mm) Price 

512-150-11 15 $31.00 

512-160-11 16 $31.00 

512-180-11 18 $31.00 

512-200-11 20 $31.00 

512-220-11 22 $35.00 

512-240-11 24 $35.00 

512-250-11 25 $35.00 

512-260-11 26 $36.00 

512-280-11 28 $38.00 

512-300-11 30 $38.00 

512-320-11 32 $38.00 

512-340-11 34 $38.00 

512-350-11 35 $38.00 

512-380-11 38 $42.00 

512-400-11 40 $44.00 

512-450-11 45* $54.00 

512-480-11 48* $63.00 

512-500-11 50* $63.00 

24 PIECE COMBINATION SET 

This set is every woodworkers dream. It contains 

6 Forstner style bits ranging from 1/4” 

to 7/8” in 1/8” increments. It also has 18 saw 

tooth bits ranging from 1” to 31/8” in 1/8” increments. 

7.7kg. 

Order no. 

Price 

STB-24PCE $104.00 

Example of bit attached 

CARBA-TEC ® FORSTNER BIT 

EXTENSION 

Extends bits by 160mm. Suits forstner 

style bits with 8mm, 5/16”, 3/8” and 10mm 

shanks. 360g. 

Order no. 

Price 

EXTN-1 $19.00 

INDIVIDUAL FORSTNER 

STYLE BITS 

Sawtooth rim bits are more 

suitable for end grain work 

but produce more tearout. 

Smooth rimmed bits are more 

suitable for cross grain work and 

produce minimal tearout. 

TRADITIONAL CARBON 

STEEL 

FORSTNER STYLE BITS 

Forstner style bits are 

more suited to drilling 

cross grain and give far 

less entry damage and exit 

damage at the edge of the hole. 

Order no. Size Weight Price 

FSB-38 3/8” 40g $9.00 

FSB-12 1/2” 40g $10.00 

FSB-58 5/8” 40g $10.00 

FSB-34 3/4” 60g $10.00 

FSB-1 1” 80g $11.00 

FSB-112 1-1/2” 160g $13.00 

TRADITIONAL CARBON STEEL 

METRIC FORSTNER STYLE BITS 


FSB-6MM 6mm 40g $7.00 

FSB-8MM 8mm 40g $7.00 

FSB-10MM 10mm 40g $9.00 

FSB-12MM 12mm 40g $9.00 

FSB-13MM 13mm 40g $10.00 

FSB-15MM 15mm 60g $10.00 

FSB-16MM 16mm 60g $10.00 

FSB-18MM 18mm 60g $10.00 

FSB-19MM 19mm 60g $10.00 

FSB-20MM 20mm 70g $10.00 

FSB-22MM 22mm 70g $11.00 

FSB-24MM 24mm 80g $12.00 

FSB-25MM 25mm 90g $12.00 

FSB-26MM 26mm 70g $12.00 

FSB-32MM 32mm 135g $13.00 

FSB-35MM 35mm 140g $13.00 

FSB-40MM 40mm 180g $15.00 

FSB-45MM 45mm 190g $15.00 

FSB-50MM 50mm 210g $21.00 

TRADITIONAL CARBON STEEL 

FORSTNER STYLE BITS 

Saw tooth bits are suited to drilling holes on 

end grain as in lathe work. Their serrated 

edge bites more aggressively than forstner 

bits, giving slightly more entry and exit damage 

than forstner bits. 


STB-178 1-7/8” 170g $15.00 

STB-2 2” 190g $16.00 

STB-218 2-1/8” 180g $16.00 

STB-214 2-1/4” 370g $17.00 

STB-238 2-3/8” 405g $17.00 

STB-212 2-1/2” 440g $20.00 

STB-3 3” 590g $30.00 

STB-318 3-1/8” 650g $31.00 



W.L. FULLER 

HIGH SPEED TAPER POINT DRILLS FOR USE WITH TYPE C COUNTERSINKS 

To cut wood and plastics in one operation for the thread and shank of wood screws. Will 

fit all types of countersinks and counterbores. 

A. 

Order no. Drill Diameter Screw Number Price 

WF-20100125 1/8” 5 

WF-20100140 9/64” 6 

WF-20100171 11/64” 8 

WF-20100187 3/16” 9 

WF-20100250 1/4” 14 

$8.00 

$8.00 

$8.00 

$8.00 

$10.00 

TYPE ‘C’ COUNTERSINKS 

B. 

DRILL & BARREL PLUG CUTTER 

SETS 

Cuts perfect plugs up to 50mm in length 

and bores the matching plug holes. Set A 

includes the following sizes: 15, 20, 25 & 

30mm. Set B includes the following sizes: 

8, 10, 12 & 15mm. When using barrel 

plug cutters the swarf should be cleared 

regularly by raising the drill press handle. 

This avoids overstressing and potentially 

breaking the plug cutter. Only for use in 

drill presses. 

Order no. 

A. PSG-8PCE-L 

B. PSG-8PCE-S 

Price 

$69.00 

$59.00 

6 PIECE PLUG CUTTER SET 

Set includes the following sizes: 3/8”, 1/2”, 

5/8” 3/4”, 7/8” and 1” plug cutters. Cuts 

plugs up to 50mm in length. 920g. 

Order no. Cutting Diameter Drill Size Overall Length Price 

WF-C4 5/16” 7/64” 7/8” 

WF-C5 3/8” 1/8” 7/8” 

WF-C8 3/8” 11/64” 7/8” 

WF-C9 3/8” 3/16” 7/8” 

WF-C14 1/2” 1/4” 7/8” 

WF-C143 5/8” 3/16” 1-1/16” 

WF-C16 5/8” 1/4” 1-1/16” 

GENERAL PURPOSE PLUG CUTTERS 

Designed for clean cutting and hardened for long life. These four-bladed Plug Cutters do 

not eject the plugs, the plug remains in the board and can be broken out with a chisel or 

the board can be sawed to free the plug. The tool cuts fast and makes a smooth chamfered 

plug for easy starting in the counterbored hole. Blades can be opened for larger, or 

closed for slightly smaller diameter plugs. 

Order no. Plug Diameter Max. length Shank Size Price 

WF-11660375 3/8” 3/8” 3/8” $20.00 

WF-11660500 1/2” 3/8” 3/8” $26.00 

WF-11660625 5/8” 3/8” 3/8” $29.00 

WF-11680750 3/4” 1/2” 1/2” $39.00 

HARDWOOD PLUG CUTTERS 

Order no. Plug Diameter Max. length Shank Size Price 

WF-11700375 3/8” 1/2” 3/8” 

WF-11700500 1/2” 1/2” 3/8” 

WF-11700625 5/8” 5/8” 3/8” 

WF-11700750 3/4” 3/4” 1/2” 

STOP COLLARS. TO SUIT TYPE ‘C’ COUNTERSINKS 

Order no. Inside Diameter Price 

WF-11900375 3/8” 

WF-11900625 5/8” 

$11.00 

$11.00 

$11.00 

$11.00 

$12.00 

$15.00 

$15.00 

$27.00 

$34.00 

$40.00 

$54.00 

$5.00 

$6.00 

Order no. 

Price 

PLUG-6 $59.00 

8 PIECE PLUG CUTTER SET 

Set includes two types of plug cutters, i.e., 

plug counterbores used for screws, etc. 

Sizes include: 1/4”, 3/8”, 1/2” and 5/8”. Plug 

lengths vary between 9 and 18mm 275g. 

Order no. 

Price 

PCS-8PCE $19.00 

W.F. FULLER 

COUNTERSINK SET 

The finest quality set of counter 

sink bits you will ever use. Made in 

the U.S.A., this set is presented in 

a handsome, hardwood case, and 

includes 1 x 3/8” and 1 x 1/2” plug 

cutter, 2 stop collars and 5 countersink 

bits to suit wood screw sizes 

6, 8, 10, 12 and 14. Drill bits are 

tapered to facilitate screw gripping. 

700g. 

Order no. 

WF-10393008 

Price 

$139.00 


99


VERITAS ® SNUG PLUG CUTTERS 

The only plug cutters that have a cylindrical 

portion for good penetration, then taper for a 

tight fit. Screws can be hidden almost invisibly. 

Set of 3 inc. 1/4”, 3/8”, 1/2”. 100g. 

Order no. 

Price 

05J05-10 $55.00 

METRIC PLUG CUTTER SET 

Set of 3 includes 6, 8 and 10mm plug cutters. 

100g. 


05J05-50 Set of 3 $55.00 

Metric sizes also sold separately 

05J05-31 6mm $22.00 

05J05-33 8mm $22.00 

05J05-35 10mm $22.00 

CMT EXPANDING 45° COUNTERSINK 

(CARBIDE TIPPED) 

Suitable for drill bits from 3 - 7mm. Outside 

diameter expands from 11 to 15mm. 50g. 

Order no. 

Price 

521-001-11 $29.00 

MIEBACH ZERO MARK 

COUNTERSINKS 

These handy countersinks have adjustable 

depth stop, adjustable centre drill and a rotation 

stop to protect the top surface or your 

workpiece. Perfect for accurate pre-drilling 

and countersinking of holes in a variety of 

materials. Quick change shank. 


COLT-10850018 3.2mm, #5 screw $29.00 

COLT-10850532 4mm, #6, #7 Screw $29.00 

COLT-10850316 4.8mm, #8&9 Screw $29.00 

COLT-10850732 5.6mm, #10 #12 $35.00 

COLT-10850014 6.4mm, #14 screw $35.00 

90° CROSS HOLE 

COUNTERSINK 

SET 

Used primarily in 

wood and plastic 

these countersinks 

can also be used 

in softer metals to 

remove burrs after 

machining. Each 

bit has a specific diameter 

range. Set includes: 2-5, 5-10, 10-15 

and 15-20mm bits in a metal case. 545g. 

Order no. 

Price 

CS-4PCE $59.00 

7 PIECE COUNTERSINK SET 

Adjustable stops and tapered drills in the 

following sizes 3.1, 3.5, 3.9, 4.3, 4.7, 5, and 

5.6mm. There are also two countersink sizes: 

9.8 & 12.8mm. 400g. 

Order no. 

Price 

CS-7PCE $25.00 

5 PIECE SCREW 

EXTRACTOR SET 

Screw heads that are damaged or stripped 

are very difficult to get out. This HSS set engages 

the damaged head and bites into the 

material easily extracting the screw. Sold as 

a set of 5 to extract 6 to 12mm screws. 

Order no. 

Price 

SRS-5PCE $19.00 

ANGLE CHUCK 

with 1/4” hex male drive 

shaft, to 1/4” hex female 

drive socket. 

This cast metal 

chuck is slightly 

less than 90° which makes it adaptable 

for more purposes. The handle can be 

moved to any position around the chuck 

body. Suitable for driving screwdriver bits 

and drill bits.165g. 

Order no. 

Price 

D-013A $12.00 

TUNGSTEN CARBIDE TIPPED CIRCLE 

CUTTING TOOL 

Cut clean crisp circles from 40mm to 

200mm. Max. depth: 25mm. Made in Japan. 

For use in drill presses only. Ideal for plastics, 

fibreglass, hardwoods, etc. 

Order no. 

Price 

F-107 $139.00 

PORTABLE DRILL 

GUIDE JIG 

This handy device allows 

you to drill holes almost 

anywhere. Used in 

conjunction with your 

powered or cordless 

drill you can take your 

tools to the work and 

perform drill press type 

functions on the move. 

Connect the drill to 

the attachment 

via the 3/8” shaft, 

insert the bit 

you need in the 

separate 3/8” 

drill chuck and 

begin to work. A 

depth stop is included for 

drilling blind holes. 1.1kg. 

NEW 

Order no. 

Price 

91G01-05 $45.00 

TOY WHEEL CUTTERS 

These are popular with hobbyists and toy 

makers alike. Cut crisp, clean toy wheels 

with 6mm axle hole for all sorts of toys and 

projects. Tipped with tungsten carbide these 

cutter cut cleaner than HSS and stay sharper 

longer too. WARNING - not to be used with 

router. 


CT-TWCH40-1/2 40mm dia. $69.00 

CT-TWCH50-1/2 50mm dia. $79.00 

CT-TWCH60-1/2 60mm dia. $99.00 


Dovetail Jigs & Joinery 

SUPER FRAME MORTISE & TENON JIG 

With the Super FMT and a plunge router, every woodworker can 

easily produce this incredible joint with unmatched accuracy and 

speed. The Super FMT’s design is based on the original and 

incomparable FMT. The same great features produce the same 

great joints. The Super FMT uses just one bit, one guide and one 

setup for every standard joint. It’s that easy. Super FMT guides 

and bits allow you to create any size mortise & tenon from a tiny 

1/16” x 1/8” to a massive 1/2” x 5”. 

FMT Features 

• Over 70 sizes of mortises and tenons 

• Standard joint guides available in 1/4”, 5/16” (included), 3/8” 

and 1/2” 

• Easily recorded, repeatable joint tightness adjustment 

• Angled and compound angled joints 

• Works with virtually any plunge router 

• Clamp boards up to 3”x5” 

• Easy and precise joint sighting 

Standard equipment 

• Universal sub-base that attaches to virtually any plunge router 

• Six 8mm joint guides (15, 20, 25, 30, 35 & 40mm) 

• 8mm (5/16”) HSS spiral upcut bit w/1/2” shank (LGH-170-500) 

• Two Leigh F Clamps 

• Adjustable side stop fence for tenoning 

• Fully illustrated user guide 


LGH-SFMT Super FMT - Metric 

$559.00 

LGH-ACSMTVC Accessory kit with carbide bits $299.00 

PRO FRAME MORTISE & TENON JIG 

The outstanding Leigh FMT Jig is appearing more and more in 

workshops around the world. After all, it is mortise & tenon joinery 

that holds most of the world’s fine furniture and cabinetry together. 

Only the FMT uses a single guide and bit to cut both mortises 

and tenons, with speed and precision that you have to see to 

believe. The FMT is so easy to use and so efficient that it brings 

professional quality joinery within reach of any shop. 

Standard equipment - Imperial Version 


• Five 5/16” joint guides (5/16” by 1/2”, 3/4”, 1”, 1-1/4” and 

1-1/2”), which can make over 21 sizes of mortises and tenons 

• Joint guide stand, two Leigh cam action clamps 

• 5/16” HSS spiral upcut bit w/1/2” shank (LGH-170-500) 



Standard equipment - Metric Version 


• Six 8mm joint guides (15, 20, 25, 30, 35 & 40mm) 

• Joint guide stand, two Leigh cam action clamps 

• 8mm (5/16”) HSS spiral upcut bit w/1/2” shank (LGH-170-500) 




LGH-FMT 

Pro FMT - Imperial 

$1,095.00 

LGH-FMT-M Pro FMT - Metric 

$1,095.00 

CARBA-TEC ® SPIRAL BITS. 

Used in conjunction with the FMT jigs, these quality spiral bits produce quality joinery. 

These super sharp solid tungsten cutters are among the best we have ever seen. Available 

as a set or individually. Create metric mortise and tenon joints at will. 

Order no. Description Shank (inch) Price 

LGH-7PCE Metric Spiral Bit Set 

$449.00 

LGH-3MM 3mm Ind. Spiral Bit 1/4 

$29.00 


$49.00 


$49.00 


$69.00 


$79.00 


$89.00 


$99.00 


101


LEIGH SUPERJIGS 

Great features—Exceptional Value! 

Leigh Super Jigs produce an extraordinary array of precision joinery—right 

out of the box! Like all Leigh jigs, with Super Jigs, you 

can easily rout many sizes of variably spaced Through and Halfblind 

dovetails as well as sliding dovetails. 

If fast production is what you need, for the first time on a Leigh 

jig, you can now rout the pins and tails of fixed spaced half-blind 

dovetails at the same time. And that’s not all. With the included 

Leigh e-Bush and the standard finger assembly, you can rout 

5/16” and 5/8” box joints with precise adjustment for fit. Available 

in 12”, 18” and 24” models, there is a Leigh Super Jig that’s just 

right for your shop and your budget. 

Features 

• Infinitely adjustable guide fingers 

• Variably spaced through dovetails 

• Variably spaced half-blind dovetails 

• Sliding dovetails 

• “Single pass” half-blind dovetails 

• 5/16” and 5/8” box joints with precise fit adjustment 

• VRS ready 

• Non-slip clamping surface 

• Cam action clamps 

• Under-cut side stops 

• Easy to read scales 

Standard equipment 

• 1/2” shank - 8° and 14° dovetail bits 

• 8mm (5/16”) straight bit 

• 1/2 ” to 8mm collet reducer 

• Leigh e-Bush 

• Pin Wrench for the e-Bush 

• Cam action speed clamps 

• Sliding dovetail fence 

• Square drive screwdriver 

• Fully illustrated User Guide 

• Instructional DVD 

• Spacer 

• Half-blind bridge piece material 

• Quick-reference pullout instructions 


LGH-SJ12M 12” Leigh Dovetail Jig (metric) $339.00 



D4R Includes: 

• Bits 

• Instructional DVD 

• User Guide 

• Template Guidebush 

LEIGH 24” D4R DOVETAIL JIG 

There are imitations, but no equals! No other dovetail jig on the 

market today, or tomorrow, can match the incredible joint making 

capability of the Leigh D4R dovetail jig system. From the first ever 

fully adjustable dovetail jig in 1981 to today’s award winning D4R, 

Leigh has led the way in dovetail jig innovation. 

Variably spaced Through and Half-blind dovetails and Sliding 

dovetails are standard on all Leigh jigs. The split finger design of 

the D4R allows complete control of pin and tail sizing and spacing 

and the 1-1/2” board thickness allows that extra flexibility for 

larger projects. 

Add the F2 Finger Joint template and you can rout 9 sizes of 

perfectly fitted box joints. Multiple Mortise and Tenon joints are 

simple with the M2 attachment but there is more. Use the M2 to 

create massive half-blind joints in boards up to 1-1/2” thick and 

unique variably spaced jumbo box joints also in boards up to 

1-1/2”. And don’t forget Leigh’s unique Isoloc templates. Isoloc 

Templates produce some of the most extraordinary joinery available. 

Only the Leigh D4R does it all. See website for more details. 

Order no. 

LGH-D4R 

Price 

$679.00 

The VRS is a full width router support. 

When the work piece has 

been routed on one side of the 

jig, the router can be effortlessly 

moved to the other side of the jig 

and parked while the work piece is 

being changed. There is no need 

to remove the router from the jig. 

LEIGH VRS VACUUM & ROUTER SUPPORT 

Dust Free Leigh Jig routing is here! The revolutionary Leigh VRS 

Vacuum & Router Support (patent pending) provides almost 

100% dust and chip collection as well as amazing full width router 

support. The VRS is a must for all Leigh dovetail jig owners. 


LGH-VRS12 VRS Super 12 

$99.00 


$99.00 


$109.00 

LGH-VRSD24 VRS D4R 

$129.00 

Accessory Kits - Combine a VRS with a Bit Set & Save 

LGH-AC12 VRS & 1607-8 Bit Set for SJ12M $199.00 



LGH-ACD24 VRS & 2411-8 Bit Set for D4R $299.00 



TEMPLATES & ATTACHMENTS 

FINGER JOINT TEMPLATES 

• Precision CNC machined aluminium 

alloy template 

• Precisely adjustable joint fit 

• F2: Nine sizes of finger joints (1/16”, 3/32”, 

1/8”, 5/32”, 3/16”, 1/4”, 5/16”, 3/8”, 1/2”. 

• Four sizes of unique rounded finger joints, 

square half-blind corners and round/square 

through corner joints. 

• F18 & F24: Six sizes of finger joints (3/32”, 

3/16,”3/8”, 1/8”, 1/4”, 1/2”). Four sizes of 

square half-blind joints. 


LGH-F18 Super18 $239.00 

LGH-F24 Super24 $279.00 

LGH-F3 (Imperial) D4R $329.00 

LGH-F3M (metric) D4R $329.00 

Key 

Inlaid Key 

Mirror Key 

Inlaid Mirror Key 

Isoloc A 

Key & Mirror Key 

Clover 

Inlaid Clover 

Bears Ears 

Inlaid Bears Ears 

Isoloc B 

Clover & Bears Ears 

Ellipse 

Inlaid Ellipse 

Wave 

Inlaid Wave 

Isoloc C 

Ellipse & Wave 

ISOLOC JOINT TEMPLATES 

• Precision CNC machined aluminium 

alloy template 

• Scales include inch and metric measurement 

• Fully adjustable joint tightness with the VGS 

• I1 Templates attach directly to the D4R and 

all 24” D-series jigs 

• I18, I24 Templates attach directly to 

Super Jigs 


LGH-I1A A for D4R $319.00 

LGH-I1B B for D4R $319.00 

LGH-I1C C for D4R $319.00 

LGH-I13 A/B/C for D4R $699.00 

LGH-I18B B for Super18 $279.00 

LGH-I24A A for Super24 $329.00 

LGH-I24B B for Super24 $329.00 

Create endless variations & even half-blind jumbo joints. 

M2 MULTIPLE MORTISE & TENON 

ATTACHMENT 

• Mortises & tenons in sizes from 5/16” x 5/8” 

to 1-1/2” x 2-1/2” 

• Choice of three corner radii:5/32”, 1/4”, plus 

square (with chiselling) 

• Jumbo half-blind joints up to 1-1/2” 

• Jumbo variably spaced finger joints up to 

1-1/2” 


LGH-M2M24 Super24 $379.00 

T H R O U G H D O V E T A I L B I T S E L E C T I O N 

All through dovetail bits have 8˚ angles. All carbide bit heights are slightly greater than maximum depth of cut listed. 

Item No. (8mm Shank) 

** ** ** ** 

LGH-50-8 LGH-60-8 LGH-70-8 LGH-75-8 LGH-80-8* LGH-90 LGH-100 LGH-140-8 * LGH-150 LGH-160 

Price (8mm Shank) $24.00 $24.00 $24.00 $24.00 $24.00 $29.00 $29.00 $24.00 $24.00 $24.00 

Depth of Cut 

1/8" 

1/4" 

3/8" 

1/2" 

5/8" 

3/4" 

7/8" 

1" 

1-1/8" 

1-1/4" 

Cutting Diameter 1/4" 5/16" 3/8" 7/16" 1/2" 11/16" 

13/16" 5/16" 7/16" 1/2" 

Depth of Cut Range 1/8"-1/4" 1/8"- 3/8" 1/4"-1/2" 3/8"- 5/8" 1/2"-13/16" 5/8"- 1" 1"- 1-1/4" up to 1" up to 1-1/4" up to 1-1/4" 

Overall Length 2" 2-1/8" 2-1/4" 2-3/8" 2-9/16" 2-3/4" 

3" 2-3/4" 3" 3" 

Shank Diameter 8mm 1/2" 

1/2" 8mm 1/2" 1/2" 

Guidebush Size 7/16"OD 5/8"OD 

5/8"OD 7/16"OD 5/8"OD 5/8"OD 

Straight Bits Req’d. Use Leigh No.140-8 Straight Bit Use Leigh No. 160 Use Leigh No. 150 – – – 

Shank Length All Shank Lengths are 1-3/4" All Shank Lengths are 1-3/4" 

** All bits may be used on the D4R. Bits 90, 100, 150 and 160 cannot be used on Super Jigs. 

* One 1/2" 8˚ dovetail bit (No. 80-8), one 5/16" straight bit (No. 140-8) and one 1/2" 14˚ dovetail bit (No. 120-8) are included with the D4R and Super Jigs. 

H A L F - B L I N D D O V E T A I L B I T S E L E C T I O N * 

All carbide bit heights are slightly greater than maximum depth of cut listed. 

Item No. (8mm Shank) 

Price (8mm Shank) 

$24.00 $24.00 $24.00 $24.00 $24.00 

Depth of Cut 

7/16" 

1/2" 

3/4" 

3/8" 

5/8" 

Bit Diameter 1/2" 

Cutting Depth 3/8" 

Shank Diameter 

8mm 

Overall Length 2-1/8" 

Guidebush Size 7/16" 

LEIGH BIT ITEM NO. 

HSS Solid Carbide 

LGH-168 LGH-168C 



LGH-1617IC 

Denotes Depth of Cut Range 

LGH-128-8 LGH-120-8** LGH-112-8 LGH-101-8 LGH-80-8** 

18º 14º 12º 10º 8º 

A 

Bit 

Diameter 

1/4" 

5/16" 

3/8" 

1/2" 

7/16" 

8mm 

2-1/4" 

7/16" 

* Depth of cut will vary for Single Pass Half-blind dovetails routed on Super Jigs. See leighjigs.com for details. 

** One 1/2" 8˚ dovetail bit (No. 80-8), one 5/16" straight bit (No. 140-8) and one 1/2" 14˚ dovetail bit (No. 120-8) are included with the D4R and Super Jigs. 

F I N G E R J O I N T B I T S E L E C T I O N 

Item No. (HSS) LGH-162 LGH-163 LGH-164 LGH-166 LGH-168 LGH-170 ** LGH-173 LGH-180 

Price (HSS) 

Item No. (Solid Carbide) 

Price (Solid Carbide) 

Depth of Cut 

1/4" 

1/2" 

3/4" 

1" 

1-1/4" 

1/8" 

3/8" 

5/8" 

7/8" 

1-1/8" 

Bit Diameter 1/16" 3/32" 1/8" 5/32" 3/16" 1/4" 5/16" 3/8" 1/2" 

Max Depth of Cut 3/16" 3/8" 3/8" 5/8" 5/8" 3/4" 7/8" 1" 1-1/4" 

Shank Diameter 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 8mm (5/16") 3/8" 1/2" 

Overall Length 2" 2" 2" 2" 2-1/2" 3" 2-3/4" 3" 3-1/2" 

Max Board Width 8-7/16" 12-9/16" 8-7/16"* 10-1/2" 12-9/16" 8-7/16"* 10-1/2"** 12-9/16"** 14-21/32"** 

** All bits may be used with the F2. Bits 165 and 170 cannot be used with the F18 and F24. 

* 1/4" and 1/8" box joints may be routed up to 14" widths on the 1/2" comb. 

** A simple two-step procedure allows 5/16" square finger joints to be routed to 20" width, and 3/8" and 1/2" square finger joints to be routed to 24" width. 

NOTE: 162, 163, and 165 are single fluted bits. 

I S O L O C B I T S E L E C T I O N 

B 

Cutting 

Depth 

up to 1" 

up to 1" 

up to 1" 

C 

Shank 

Diameter 

1/4" 

5/16" 

3/8" 

D 

Shank 

Length 

1-7/8" 

1-7/8" 

1-7/8" 

3-piece Bit Set (includes all three Solid Carbide bits listed) 

E 

Overall 

Length 

3" 

3" 

3" 

M U L T I P L E M O R T I S E A N D T E N O N B I T S E L E C T I O N 

LEIGH BIT ITEM NO. A 

B 

C 

D 

E 

Bit 

Cutting Shank 

Shank Overall 

HSS Solid Carbide Diameter Depth Diameter Length Length 

LGH-180* 

LGH-180C 1/2" 

1-1/2" 

1/2" 

2" 

3-1/2" 

LGH-170 LGH-170C 5/16" 

1" 

5/16" 

2" 

3" 

1/2" 

1/2" 

8mm 

2-5/16" 

7/16" 

1/2" 

5/8" 

8mm 

2-3/8" 

7/16" 

1/2" 

3/4" 

8mm 

2-9/16" 

$24.00 $24.00 $24.00 $25.00 $26.00 $37.00 $39.00 $75.00 

– – LGH-164C LGH-165C LGH-166C LGH-168C LGH-170C LGH-173C LGH-180C 

$37.00 $39.00 $43.00 $43.00 $65.00 $67.00 $129.00 

*Bit 180 is included with the mortise and tenon attachment. 

F I N G E R J O I N T B I T S E T S 

Item No. (High Speed Steel) LGH-162 LGH-163 LGH-164 

LGH-166 LGH-168 LGH-170 LGH-173 

LGH-1806F For Super Jigs F18, F24 

• • 

• • 

• 

LGH-1618F For F2 

• • • 

• • • • 

Item No. (Solid Carbide) 

LGH-164C LGH-165C LGH-166C LGH-168C LGH-170C LGH-173C 

LGH-1806C For Super Jigs F18, F24 • 

• 

• • 

• 

LGH-1618C For F2 

• • • • • • • • 

7/16" 

F 

Joint 

Length 

5/8" 

5/8" 

5/8" 

Required 

Template 

Guidebush 

5/8" 

7/16" 

LGH-180 

• 

LGH-172-8 LGH-172-375 

• 

Price 

$189.00 

• 

LGH-180C 

• 

LGH-172-8 

• 

LGH-172/LGH-375 

$259.00 

• 

• • 

• 

• 

$279.00 

$495.00 

D O V E T A I L B I T S E T S 

Item No. LGH-50-8 LGH-60-8 LGH-70-8 LGH-75-8 LGH-80-8* LGH-90* LGH-100 LGH-101-8 LGH-112-8 LGH-120-8 

* 

LGH-128-8 LGH-140-8 

* 

LGH-150 LGH-160 LGH-172-8 Price 

LGH-16078 (Super Jigs) 

LGH-24118 (D4R) 

LGH-51168 (D4R) 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• • 

• 

• 

• 

• 

• 

• 

• 

• 

• 

• • 

• 

• 

• • 

• 

• 

• 

• 

• 

2 

$169.00 

$239.00 

$299.00 

Comes standard Super D4R. Bits shanks cannot Super * with Jigs and NOTE: with 1/2" be used on Jigs. 


103


LEIGH R9 PLUS ROUTER TABLE 

& BENCH JOINERY SYSTEM 

The new R9 PLUS Joinery System uses a precision CNC machined 

template along with new template positioning technology (patent pending) 

for fast and accurate routing of Through Dovetails and Box Joints. 

The PLUS? The R9 Plus makes 3 sizes of Box Joints and 3 sizes of 

Through Dovetails, all on boards of any width. Perfect joint fit is guaranteed, 

and repeatable, with the patent pending Leigh e10 guide bush. 

Accessory Kit 


LGH-R9 R9 Plus Joinery System $189.00 

LGH-ACR9 R9 Plus Accessory Kit $105.00 

UNIVERSAL 

TEMPLATE GUIDES 


LGH-702 Guidebush adaptor to suit some Bosch, DeWalt, Elu, Ryobi 

$20.00 

LGH-702R Guidebush adaptor to suit some DeWalt, Elu 

$26.00 

LGH-703 Guidebush adaptor to suit some Hitachi, Makita, Ryobi 

$20.00 

LGH-704R Guidebush adaptor to suit Triton TRA001, some Metabo,Festool $26.00 

LGH-705R Guidebush adaptor to suit Festool OF2000 

$26.00 

LGH-706R Guidebush adaptor to suit some DeWalt, Elu, Makita, Ryobi 

$26.00 

LGH-710 Guidebush adaptor to suit Archer/Axminster AW635/AW127 

$25.00 

LGH-721 Guidebush adaptor to suit some Makita 

$28.00 

LGH-RA1100 Guidebush adaptor to suit some Bosch 

$35.00 

FE-493566 Guidebush adaptor to suit Festool OF1400 

$59.00 

LGH-711TP Guidebush 7/16” OD 

$16.00 

LGH-716TP Guidebush 5/8” OD 

$16.00 

LGH-717TP Guidebush .673” OD suit MMTA 

$27.00 

LGH-720TP Guidebush .756” OD suit MMTA 

$27.00 

LGH-E7 Elliptical Guidebush 7/16” OD 

$16.00 


$16.00 


$16.00 

12” BLIND DOVETAIL JIG 

Made in Taiwan, This unit is almost identical to the mainland Chinese copies. 

However the finish and attention to detail is superior. Jig will dovetail material up 

to 12” (300mm) wide and from 12mm to 32mm thick. 10kg. 


WDV-1NK Dovetail Jig $135.00 

DTJFDS Accessory Mini Dovetail Comb, Router Bit & Template Guide $79.00 

Optional Router Bits to Suit WDV-1NK Dovetail Jig 

Order no. 

Desc. 

Shank 

Size 

Cutting 

Length 

Cutting 

Dia. 

Angle Weight Price 

CT-0758B 

1/4” 16mm 5/8” 7° 60g $25.00 

Dovetail Bit 

818-142-11B 1/4” 9.5mm 9/16” 14° 60g $35.00 

BJB-95 Box Joint Bit 1/4” 9.5mm 1/2” 0° 60g $29.00 

CMT TM BISCUIT BLADE 

This 100mm blade with its industrial 

Teflon ® coating will make 

swift and accurate cuts for your 

biscuits. Eight carbide teeth 

and 22mm bore. Will fit Lamello, 

Porter-Cable, Bosch, Freud and 

Archer biscuit jointers. 190g. 

Order no. 

Price 

240-008-04 $29.00 

CARBA-TEC ® METRIC DOW- 

EL FORMER & RE-SIZER 

Ideal for re-sizing pre-existing 

dowels to a smaller size or converting 

imperial dowels to metric 

dowels. 

Order no. 

Price 

DPM-1 $59.00 

HARON JOINERY BISCUITS 

Order no. Desc, Price 

HA-H5465 50pk,#0 $9.00 

HA-H5460 150pk,#10 $21.00 

HA-H5463 150pk,#20 $21.00 

SELF-CENTRING 

DOWELING JIG 

This design has removable 

bushings that allow you to drill 

two holes the same size without 

moving the jig. The holes are on 

3/4” centre, the bushings and 

centre section are hardened drill 

steel and plated for rust protection. 

Comes with two 6, 8, 10mm 

bushings. Weight 1.25kg. 

Order no. 

Price 

DJ-1M $49.00 

DJ-1M-BUSH $10.00 

ROCKLER POCKET HOLE 

JOINERY CLAMP 

Clamp and surface align your 

pocket hole joints easily. Works 

with 3/8’’ pocket holes on 3/4’’ 

thick face frames and casework. 

Clearance in clamp body allows 

for clamping and fastening of 

double joints in one step. Lightweight 

aluminium construction. 

Patent pending. 

Order no. 

Price 

RK-38518 $24.00 



B. 

A. 

A. BEADLOCK 3/8” BASIC STARTER 

KIT & B. PRO JOINERY KIT 

Get incredibly strong, totally concealed 

joints with just your hand drill and a Beadlock 

kit. This patented system creates overlapped 

drill bit holes precisely to accept a 

special Beadlock loose tenon. This ribbed 

tenon approach prevents racking and increases 

the amount of face grain glue surface 

area. Beadlock Basic (A) includes four 

.060” shims, two .030” shims, 3/8” HSS drill 

bit and a moulded plastic case for storage. 

Beadlock Pro (B) includes the Pro jig, 3/8” 

HSS drill bit, 3/8” stop collar, 3/8” Beadlock 

guide block, 3/” mortise paring guide block 

and a moulded plastic storage case. 


RK-34802 A. Basic Started Kit $45.00 

RK-37801 B. Pro Joinery Kit $179.00 

BL-12 1/2” Tenon Stick $5.50 

BL-38 3/8” Tenon Stick $5.50 

RK-34985 1/2” Guide Block (Basic) $35.00 

RK-36546 1/2” Guide Block (Pro) $69.00 

PICTURE FRAMING KIT 

A kit containing all the equipment needed 

to make your own frames. Kit includes mitre 

clamp, magnetic saw guide with tenon saw, 

v-nailing tool and a selection of v-nails, flexinails 

and push applicator, hanging wire and 

a selection of brass hooks and hangers. 2kg. 

Order no. 

Price 

TRT-320 $62.00 

COMPACT MITRE BOX 

Saw carriage swings right and left 45° for 

simple mitre cuts. Wood cutting capacity 

at 90°: 119mm wide x 110mm high, at 45° 

either left or right cuts: 71 wide x 110mm 

high. Blade length: 350mm. Comes with the 

standard 14tpi blade. 1.6kg. 

Order no. 

Price 

CPT-350 $48.00 

Optional Blades 

CPT-350-14T 14tpi $11.00 

CPT-350-18T 18tpi $11.00 

MITRE BOX 

Saw carriage swings right and left 45° for 

simple mitre cuts. Wood cutting capacity 

at 90°: 137mm wide x 110mm high, at 45° 

either left or right cuts: 85 wide x 110mm 

high. Blade length: 550mm. Comes with the 

standard 14tpi blade. 2.6kg. 

Order no. 

Price 

CPT-550 $58.00 


CPT-550-18T 18tpi $15.00 

CPT-550-24T 24tpi $17.00 

M I T R E 

BOX 

Saw carriage swings 

right and left 45° for simple 

mitre cuts. Blade also tilts left and right 45° 

for compound mitre cuts. Max. wood cutting 

capacity at 90°: 175mm wide x 155mm 

high, at 45° either left or right cuts: 111 wide x 

155mm high. Blade length: 600mm. Comes 

with the standard 14tpi blade. 4.6kg. 

Order no. 

Price 

CPTC-600 $79.00 


CPTC-600-14T 14tpi $19.00 

CPTC-600-18T 18tpi $19.00 

CPTC-600-24T 24tpi $21.00 

PRECISION MITRE 

TRIMMER 

Set at 90° or 45° for near 

perfect joints. Fitted with 

razor sharp HSS blades 

for clean trimming of 

wood & picture 

frame mouldings. 

13.6kg. 

Order no. 

Price 

CT-MT $299.00 

WOOD THREAD BOX & TAP SET 

Prices include tap. Sizes as follows. 

Weights: 51g, 59g, 63g, 70g, 83g. 


WTB-12 1/2”, 8 tpi $63.00 

WTB-34 3/4”, 6 tpi $65.00 

WTB-1 1”, 6 tpi $70.00 

WTB-114 1-1/4”, 6tpi $73.00 

WTB-112 1-1/2”, 6 tpi $75.00 

CARBA-TEC ® V-NAIL TOOL 

Install v-nails with ease, either 

by hand or by way of striking the 

handle of the tool with 

a mallet or hammer. Kit 

includes v-nail tool with 

magnetic positioner, 100 

7mm v-nails and 100 

10mm v-nails. 245g. 

Order no. 

Price 

VNT-320 $36.40 

REPLACEMENT V-NAILS for hardwood 


PUSH-10410 7mm, 400pk $14.50 

PUSH-10412 10mm, 400pk $14.50 

PUSH-10414 12mm, 400pk $14.50 

PUSH-10417 15mm, 400pk $14.50 

CARBA-TEC ® MITRE CLAMP 

Jaws grip close to the joint avoiding bowing 

problems while under pressure. This unit can 

be used bench mounted or free standing. 

Accepts material up to 120mm wide and up 

to 40mm thick. This clamp is ideal for joining 

45° mitred material at 90° such as picture 

framing and carcasses, etc. 730g. 

Order no. 

Price 

CT-7901 $23.00 


105


THE MINI 

KREG JIG ® 

Kreg’s most 

positionable pocket 

hole tool. The jig 

is designed without an 

alignment fence which allows 

it to be clamped at virtually 

any angle or orientation to the edge 

of the workpiece 

• Compact, single-drill guide design allows 

placement of pocket holes in tightest 

areas. 

• Unlimited material thickness and width 

positioning thanks to fenceless design. 

• Hardened steel drill guide with lifetime 

warranty holds up in the most 

demanding applications. 


KR-MKJ Mini Kreg Jig $12.00 

KR-MKJKIT Mini Kreg Jig Kit $25.00 

KREG R3 POCKET HOLE JIG 

If you’re ready to start your next woodworking 

or home improvement project, the R3 

Kreg Jig ® is the tool for you. We’ve loaded 

this jig with a ton of features that allow you to 

put projects together more quickly than ever 

before. 

• 9 Position Settings 

• Wood Chip Relief Holes 

• Clamp Adaptor 

• Organised Carrying Case 

• Hardened steel drill guides 

Order no. 

Price 

KR-R3 $59.00 

THE MICRO 

POCKET TM 

DRILL GUIDE 

With a 25% smaller 

hole diameter than 

the Mini Kreg Jig ® , 

the Micro Pocket TM 

Drill Guide lets you 

create more compact, low-profile Pocket- 

Holes in the same joinery applications, but 

also tackle smaller projects, thinner stock, 

and tighter repair applications. 

Kit Includes: 

• Micro Pocket TM Drill Guide 

• Micro Pocket TM Drill Bit 

• Micro Pocket TM Depth Collar 

• Starter Screw Set 

Order no. 

Price 

KR-KJMICRODGB $55.00 

KREG K4 JIG 

The perfect choice for DIY’ers and anyone 

new to Pocket-Screw Joinery. 

Whether you’re building your first set of garage 

storage shelves or making simple repairs 

around the house, the Kreg Jig® can 

help you finish the job in less time, and with 

far less effort than you ever thought possible. 

• Removable Drill Guide for benchtop 

and mobile use. 

• 1/8” incremental settings for materials 

from 1/2” to 1-1/2” thick. 

• Patented three drill guide fixed spacing 

on the Drill Guide. 

Order no. 

Price 

KR-K4 $119.00 

THE KREG JIG ® K4 MASTER SYSTEM 

The ultimate Pocket-Hole Jig on the market, 

and a great choice for any woodworking enthusiast. 

Between its front-side clamping capabilities, 

Dust-Collection Attachment, Material 

Support Stop, removable 3-Hole Drill 

Guide, and seemingly endless adjustability, 

this jig truly has it all! 

• Removable Drill Guide for use with bench 

top and portable bases. 

• 1/8” incremental settings for materials 

from 1/2” to 1-1/2” thick. 

Order no. 

Price 

KR-K4MS $179.00 

KREG RIGHT 

ANGLE CLAMP 

Our Right Angle Clamp 

helps to align 

workpieces in 

90 degree registration. 

The clamp is designed 

with a 3/8” steel pin on 

one arm that fits down 

into the pocket hole and anchors the workpiece 

firmly against the second workpiece to 

be joined. The opposite arm is fitted with a 

180 swivelling pad that automatically adjusts 

to your material dimensions. 

Order no. 

Price 

KR-KHC-RAC $39.00 

KREG FACE CLAMPS 

Our line of Face Clamps helps to ensure 

a perfectly flush joint every time. Without 

clamping, the joint can misalign if the screw 

follows the grain of the wood. To use, place 

the large pad of the clamp directly over the 

centre of the joint line on the face side of 

the workpiece(opposite the pocket holes), 

clamp with moderate pressure and drive a 

screw. 


KR-KHC-PREMIUM 3” reach $29.00 

KR-KHC-LARGE 6” reach $39.00 

KR-KHC-XLARGE 10” reach $52.00 

KREG 90° 

CORNER 

CLAMP 

Finally a corner 

clamp as easy 

to use as a face 

clamp. Perfect 

for box construction. 

• Self-Squaring Design 

• Innovative Swivel Head 

• Large Clamping Surface 

Order no. 

Price 

KR-KHC-90DCC $45.00 

KREG DVD’S 

These DVD’s deal with practical projects that 

can be completed using Kreg jigs, from the 

simplest to the most sophisticated. 


KR-V03-DVD Cabinetmaking $15.00 

KR-V05-DVD Tables $15.00 

KR-V06-DVD Router Tables $15.00 

KR-V07-DVD Trim Carpentry $15.00 

KREG PROJECT 

PLANS CD 

All 15 of our pocket 

hole project plans in 

PDF format on one 

CD. Print from your 

home computer. 

Order no. 

Price 

KR-PCD $25.00 



KREG TIMBER & PLASTIC PLUGS 


KR-P-CDR 50 USA Cedar plugs, 50g $12.00 

KR-P-CDR-200 200 USA Cedar plugs, 50g $44.00 

KR-P-CHE 50 Cherry plugs, 70g $12.00 

KR-P-CHE-200 200 Cherry plugs, 70g $44.00 

KR-P-MAP 50 USA Maple plugs, 80g $12.00 

KR-P-MAP-200 200 USA Maple plugs, 340g $44.00 

KR-P-OAK 50 USA Oak plugs, 80g $12.00 

KR-P-OAK-200 200 USA Oak plugs, 80g $44.00 

KR-P-PIN 50 Pine plugs, 55g $12.00 

KR-P-PIN-200 200 Pine plugs, 55g $44.00 

KR-P-WAL 50 USA Walnut plugs, 70g $12.00 

KR-P-WAL-200 200 USA Walnut plugs, 70g $44.00 

KR-CAP-WHT-50 50 White plastic plugs, 23g $12.00 

KR-CAP-WHT-200 200 White plastic plugs, 23g $44.00 

KR-CAP-ALM-50 50 Almond plastic plugs, 110g $12.00 

KR-CAP-ALM-200 200 Almond plastic plugs, 340g $44.00 

KR-CAP-BLK-50 50 Black plastic plugs, 110g $12.00 

KR-CAP-BLK-200 200 Black plastic plugs, 340g $44.00 

KR-CAP-BRN-50 50 Brown plastic plugs, 110g $12.00 

KR-CAP-BRN-200 200 Brown plastic plugs, 340g $44.00 

KR-CAP-LTB-50 50 Light Brown plastic plugs, 110g $12.00 

KR-CAP-LTB-200 200 Light Brown plastic plugs, 340g $44.00 

KREG SQUARE DRIVERS & 

DRILL BITS 

Our one-piece design eliminates 

clogging and provides a 

much smoother and faster drilling 

stroke than the drill bits with 

replaceable centre drills. 


KR-KJD 3/8” High Speed Steel Drill Bit, 70g $18.00 

KR-KJSC-D Depth collar/allen Wrench (not shown) $3.00 

KR-KJD-MICROBIT Micro pocket depth collar/allen wrench $18.00 

KR-DDS 3” & 6” Square Driver Set $6.00 

KREG QUICK CHANGE KIT 

This one simple kit provides everything 

you need to switch from drilling Pocket- 

Holes to driving Pocket-Screws, in just 

seconds. Components include an innovative 

Quick Change Chuck, a 6” #2 

Square Driver, and the all new 3/8” Hex- 

Shank Pocket-Hole Drill Bit – including allen 

wrench and depth collar. 

Order no. 

Price 

KR-QUIK-KIT $29.00 

KREG SCREW KITS 

KR-SK03 kit includes: SPS- 

F1 x150, SPS-C1 x150, 

SML-F125 x 150, SML-C125 

x 150 & SML-C250B x 75. 

KR-SK03B kit includes: 

SML-125B x 100, SML-150B 

x 100, SML-C2B x 100, 

SML-C250B x 150. 


KR-SK03 Standard Screw Pack $39.00 

KR-SK03B BlueKote Screw Pack $49.00 

KREG SELF TAPPING SCREWS 

Order no. Description Qty. g/kg Price 

MAXI-LOC TM FINE 

KR-SML-F125-100 

100 340g $6.00 

KR-SML-F125-500 

#7 Fine/Washer-Head 

500 

1-1/4” 

1.36kg $25.00 

KR-SML-F125-1000 1000 2.49kg $42.00 

KR-SML-F150-100 

100 340g $7.00 

KR-SML-F150-500 

#7 Fine-Washer-Head 

500 

1-1/2” 

1.47kg $28.00 

KR-SML-F150-1000 1000 2.72kg $47.00 

MAXI-LOC TM COARSE THREAD 

KR-SML-C1-100 

100 230g $6.00 

KR-SML-C1-500 

#8 Coarse/Washer- 

Head 1” 

500 1.13kg $24.00 

KR-SML-C1-1000 1000 2.04kg $42.00 

KR-SML-C125-100 

100 340g $6.00 

KR-SML-C125-500 


Head 1-1/4” 

500 1.3kg $24.00 

KR-SML-C125-1000 1000 2.38kg $42.00 

KR-SML-C150-100 

100 340g $7.00 

KR-SML-C150-500 


Head 1-1/2” 

500 1.59kg $29.00 

KR-SML-C150-1000 1000 2.95kg $49.00 

KR-SML-C2-50 #8 Coarse/Washer- 50 230g $5.00 

KR-SML-C2-250 Head 2” 250 1.02kg $19.00 

KR-SML-C250-50 #8 Coarse/Washer- 50 260g $7.00 

KR-SML-C250-250 Head 2-1/2” 250 1.1kg $25.00 

MAXI-LOC TM HI-LO 

KR-SML-HL125-100 

100 340g $6.00 

KR-SML-HL125-500 

#7 Hi-Lo/Washer- 

Head 1-1/4” 

500 1.25kg $25.00 

KR-SMLHL125-1000 1000 2.49kg $42.00 

PAN HEAD FINE 

KR-SPS-F075-100 

100 230g $6.00 

KR-SPS-F075-500 

#6 Fine/Pan-Head 

3/4” 

500 1.3kg $22.00 

KR-SPS-F075-1000 1000 1.7kg $39.00 

KR-SPS-F1-100 

100 340g $6.00 

KR-SPS-F1-500 #6 Fine/Pan-Head 1” 500 1kg $24.00 

KR-SPS-F1-1000 1000 1.93kg $42.00 

KR-SPS-F125-100 

100 340g $6.00 

KR-SPS-F125-500 


1-1/4” 

500 1.2kg $25.00 

KR-SPS-F125-1000 1000 2.3kg $42.00 

KR-SPS-F150-100 

100 340g $7.00 

KR-SPS-F150-500 


1-1/2” 

500 1.25kg $28.00 

KR-SPS-F150-1000 1000 2.5kg $47.00 

PAN HEAD COARSE 

KR-SPS-C1-100 

100 340g $6.00 

KR-SPS-C1-500 

#7 Coarse/Pan- 

Head 1” 

500 1kg $24.00 

KR-SPS-C1-1000 1000 2kg $42.00 

BLUE-KOTE 

KR-SML-C125B-100 


Head 1-1/4” 

100 340g $8.00 

KR-SML-C150B-100 #8 Coarse/Washer- 100 450g $9.00 

KR-SMLC150B-1000 Head 1-1/2” 1000 2kg $65.00 


KR-SML-C2B-250 Head 2” 250 910g $21.00 


KR-SML-C250B-250 Head 2-1/2” 250 1.13kg $29.00 

STAINLESS SCREWS 

KR-SMLC125S5-100 #8 Coarse/Washer- 100 340g $24.00 

KR-SMLC125S51000 Head 1-1/4” 1000 2.5kg $189.00 

KR-SMLF125S5-100 #8 Fine/Washer-Head 100 340g $37.00 

KR-SMLF125S51000 1-1/4” 1000 2.5kg $299.00 


KR-SMLC150S51000 Head 1-1/2” 1000 2.83kg $199.00 


KR-SMLC250S5-250 Head 2-1/2” 250 1.7kg $139.00 


107

Adhesives & Finishing Products 

GLUE SYRINGES 

For accurately applying glue in awkward 

spots, nothing beats a needle-tipped syringe. 

This set of five syringes with 10 bluntend 

needles (five #18 gauge and five #20 

gauge). Ideal for putting glue deep into 

cracks. Made in USA. 70g. 

Order no. 

Price 

25K07-31 $17.00 

GLUING KIT 

An excellent value 

glue applicator incorporating 

a glue 

roller and other 

various nozzles. 

The nozzles come 

in different sizes 

and configurations 

including a 

brush applicator, dowel hole nozzles and a 

specific nozzle purely for biscuit joints. Supplied 

with two empty glue bottles. 425g. 

Order no. 

Price 

GB-55 $19.00 

EARLEX HVLP PRO 

Designed for tradesmen 

and serious DIY 

enthusiasts. Fitted with 

a 625w efficient taper 

fan motor supplying 

the gun with a constant 

flow. The Earlex 

Pro always allows for a 

professional result with 

no brush marks, at the 

same time as being extremely 

time efficient. 

5.5kg. 

Order no. 

Price 

EARLEX-PRO $499.00 

NEW 

POLYPROPYLENE SHIMS 

Accurately made in a range of thicknesses, 

these polypropylene shims can be used individually 

or stacked in combinations for a precise 

fit, saving time and eliminating guesswork 

when spacing, plumbing or levelling. 

Assortment includes 1/32”, 1/16”, 1/8” and 

1/4” thick shims (10 of each) 

Order no. 

Price 

27K07-45 $9.00 

PAINTER’S PYRAMIDS - 10PK 

These simple supports are quick to set up, 

non-marking, and compact to store. Moulded 

from a solvent-resistant polymer, they will 

not react with finishes or wood. Each support 

is 50mm high and has a load rating of 90kg. 

Order no. 

Price 

88K58-70 $8.00 

GLUE BOTTLE 

SET 

All purpose glue 

bottle set. Includes 

glue bottle 

and 3 interchangeable 

(roller, point and Napoleon style) 

heads included. 145g. 

Order no. 

Price 

GS-114 $9.00 

TWIST-N-SEAL STOPPER (5 PACK) 

This clever reusable plug forms a lasting, airtight 

seal on plastic nozzles or tubes from 2.4 

to 11mm internal diameter. Made of a tough 

plastic composite, it inserts simply by pushing 

and turning. The fine screw-like threads 

deform the softer nozzle or tube material, so 

it grips securely but removes easily by unscrewing. 

Pack of five. Made in USA. 

Order no. 

Price 

25K80-95 $4.00 

HUT WOODTURN- 

ER’S WAX 

With Money Back 

Guarantee. If this is 

not the best and easiest 

finish you’ve ever 

tried, return it at the 

end of seven days for 

a full refund of the purchase 

price. Gives a hard, full bodied finish 

to your work without lines or blotches. 120g. 


HUT-L Light $16.00 

PROFESSIONAL PEN POLISH WAXES 

For a long wearing semi-gloss finish use 

brown. 70g. For a long wearing full gloss finish 

use white. 70g. The ultimate gloss finish, 

use brown first, then finish with white. 


HUT-107 Brown $9.00 

HUT-108 White $9.00 

Items can 

be sent 

by mail. 

ORGANOIL DANISH TYPE OIL 

A medium sheen finish comprising of tungnut, 

linseed, pinewood & citrus oils, made in 

the tradition of the heavy oil formulation that 

Danish oil is famous. Perfect for interior furniture, 

joinery and timber feature work. 


ORG-DO-500ML 500ml, 550g $26.00 

ORG-DO-1LTR 1L, 1kg $41.00 

ORGANOIL ECOWOOD OIL 

A blend of nut and citrus oils, specially formulated 

to create a drying oil that will maintain 

wooden items that often come into contact 

with food or water. A simple wipe on/ 

wipe off application is all that is required to 

keep wooden surfaces and utensils looking 

good. 300g. 

Order no. 

Price 

ORG-WOODWIPE $15.00 

ORGANOIL GARDEN FURNITURE OIL 

A matt sheen, marine grade clear oil that 

penetrates and nourishes. (Not shown) 


ORG-GF-500ML 500ml, 500g $25.00 

ORG-GF-1LTR 1L, 1kg $37.00 

ORGANOIL HARD BURNISHING OIL 

Based on Tung Oil, it has very efficient drying 

and curing capabilities. 560g. 


ORG-HB 500ml, 560g $25.00 

ORG-HB-1LTR 1L, 1kg $37.00 

NATURAL WAX & POLISH 

A formulation of filtered bees wax and pure, 

light plant oils. (Not shown) 


ORG-WP-500 500ml, 600g $24.00 

NATURAL WOODSHEEN 

Formulated from highly refined Natural Plant 

Oils and waxes. Provides a soft, satin result. 


ORG-W-1LTR 1L, 1kg $37.00 

WASH-A-WAY 

A safe effective alkaline salt based cleaner 

and soaker, with an oxidizing, mild bleach 

action. An ideal cleaner for external grimy, 

mouldy and weathered timbers. 


ORG-WASH 1L $22.00 



HOT STUFF CYANOACRYLATE GLUE 

REFERRED BY LABEL COLOUR. ALL 

GLUES CLEAR. 

RED LABEL HOT STUFF 

Used for assembled joints such as chair 

stretchers and legs that are loose and 

won’t come apart easily, tight cracks, and 

any place a thin viscosity fast dry glue is 

called for. 80g 

Order no. 

Price 

HS-4 $15.00 

YELLOW LABEL SUPER T HOT STUFF 

The general purpose glue, its medium viscosity 

and drying time allows some alignment 

and assembly time. 80g. 

Order no. 

Price 

HST-4 $15.00 

GREEN LABEL SPECIAL T HOT STUFF 

A heavy bodied, thick viscosity glue allowing 

the most assembly time and is excellent on 

very porous surfaces or where complex assembly 

requires the most time to work. 80g. 

Order no. 

Price 

HST-4T $17.00 

SPARE TIPS 

Extra tips and over caps are available 2 

sets to a box. 10g. 

Order no. 

Price 

HT-600 $5.00 

PRO TIPS 

Precision control extension applicators, 12 

per box. 10g. 

Order no. 

Price 

PT-100 $4.00 

HOT SHOT ACCELERATOR 

An excellent degreaser and preparation. 90g. 

Order no. 

Price 

NCF-5M $17.00 

‘U BEAUT WHITE 

SHELLAC (DEWAXED) 

This shellac is used the same 

way as you would use any of 

the other varieties of shellac. 

The major difference between 

this shellac and the others is 

that it is a bit harder, shines a 

bit brighter, is free from wax 

and will not change the natural, 

wet colour of wood. 500ml. 

Shipping weight: 485g. Flammable - Road 

Transport only. 

Order no. 

Price 

UB-DWS $28.60 

‘U BEAUT SHELLAWAX 

GLOW 

Shellawax Glow is identical 

to Shellawax, except for its 

colour. The Glow product is 

a deeper colour than regular 

Shellawax making it suitable 

for darker, more highly figured 

timbers. It will add depth 

and richness to your project, 

enhancing the natural figure. 

500ml. Shipping weight: 

485g. Flammable - Road Transport only. 

Order no. 

Price 

UB-SGW $40.70 

‘U BEAUT EEE 

ULTRA SHINE 

A cut and polish paste 

wax containing Tripoli 

powder, an ultra fine 

abrasive. The polish is 

designed to be used in 

conjunction with Shellawax 

and Shellawax 

Cream or as a finish in its own right on plastics 

and some stone. It has the ability of eliminating 

all sanding marks from most timbers 

and can greatly reduce your sanding time. 

250ml. Shipping weight: 300g. 

Order no. 

Price 

UB-EEE $23.10 

‘U BEAUT 

TRADITIONAL WAX 

This wax product is a 

general purpose wax 

paste made from a 

unique blend of minerals 

and natural waxes 

(including Ceresin 

& Carnauba), with a 

clean fresh fragrance. 

This special blend of waxes make Traditional 

Wax very easy to work with and leaves you 

with a non-sticky surface that will not attract 

dust or finger marks. 


UB-TNEUT Neutral, 250ml $15.40 

UB-TBALT Baltic Pine, 250ml $16.50 

UB-TWNUT Walnut, 250ml $16.50 

UB-TCED Cedar, 250ml $16.50 

‘U BEAUT 

SHELLAWAX 

The new formula Shellawax 

is a foolproof, one application, 

friction polish, made 

for use on the wood lathe. 

It is (to our knowledge) the 

fastest and easiest to use 

polish of its kind on the 

market today, giving an 

instant shine to all timbers. 

Flammable - Road Transport 

only. 


UB-SW250 250ml $28.60 

UB-SW500 500ml $40.70 

TITEBOND ® ORIGINAL WOODGLUE 

Provides a strong initial tack and fast speed 

of set to reduce clamp time. 


TBD-1-237ML 237ml $4.00 

TBD-1-473ML 473ml $6.00 

TBD-1-946ML 946ml $10.00 

TBD-1-3785ML 3.785ml $29.00 

TITEBOND ® II PREMIUM WOODGLUE 

Is the only one-part wood glue that passes 

the ANSI Type II water resistance specification. 

It is FDA approved for indirect food contact 

and is ideal for radio frequency gluing 

systems. 


TBD-2-237ML 237ml $5.00 

TBD-2-473ML 473ml $9.00 

TBD-2-946ML 946ml $14.00 

TBD-2-3785ML 3.785ml $32.00 

TITEBOND ® III ULTIMATE WOODGLUE 

Titebond III Ultimate Wood Glue is the first 

one-part, water cleanup wood glue ever offered 

that is proven waterproof. Titebond III 

is non-toxic, solvent free and cleans up with 

water. 


TBD-3-237ML 237ml $7.00 

TBD-3-473ML 473ml $10.00 

TBD-3-946ML 946ml $17.00 

TBD-3-3785ML 3785ml $36.00 

TITEBOND ® POLYURETHANE GLUE 

Ready-to-use, offers excellent sandability 

and is unaffected by finishes. 355ml bottle. 

Order no. 

TBD-POL-355ML 

Price 

$16.00 

TITEBOND ® LIQUID HIDE GLUE 

Is the first hide glue to be offered in a liquid, 

ready-to-use form. It requires no mixing, 

heating or stirring. 237ml. 

Order no. 

TBD-LH-237ML 

Price 

$10.00 


109


LIBERON PURE 

TUNG OIL 

Provides a hard wearing 

finish it is ideal for surfaces 

such as kitchen 

worktops, tables and 

all high quality interior 

wood. Pure Tung Oil is a 

natural, non-toxic (EN71 

approved) product which 

can be used on toys and 

objects in contact with 

food such. 


LBN-014616 500ml $35.00 

LBN-014617 1L $66.60 

LIBERON SUPERIOR 

DANISH OIL WITH UV 

FILTER 

A blend of pure tung oil 

and natural oils which 

protect hard and soft 

woods. It is a penetrating 

oil, which brings out the 

natural grain of the timber 

and provides a satin 

to gloss sheen. Superior 

Danish Oil may darken 

some timbers and blackening 

may occur on some external timbers. 


LBN-014642 500ml $30.20 

LBN-014643 1L $47.40 

LIBERON EASY 

FRENCH POLISH 

A shellac and resin 

blended polish for use 

on small surfaces that is 

ideal for use on furniture, 

carved woodwork etc. 

Easy to use it is ideal for 

beginners and will beautifully 

enhance the wood’s 

natural finish. Always test 

product first on a spare 

surface. One litre covers 

approximately 8 to 10m2. Interior usage only. 


LBN-014667 250ml $26.00 

LBN-014668 500ml $46.50 

LIBERON BUT- 

TON SHELLAC 

FLAKES 

These shellac 

flakes produce 

a golden brown 

coloured French 

Polish which is 

often used in antique 

restoration or bespoke production of 

furniture. 250g. 

Order no. 

Price 

LBN-014690 $25.00 

LIBERON BLACK 

BISON PASTE 

WAX 

Ideal for nourishing 

and protecting all 

types of wood, including 

lacquers and 

French polishes. Black 

Bison is well known for its quality and distinctive, 

pleasant smell. It is traditionally used 

on antiques but is also suitable for use on 

modern furniture and will enhance the natural 

beauty of wood whilst protecting it against 

dryness. 


LBN-004177 150ml, Clear $20.00 

LBN-004171 500ml, Clear $39.20 

LBN-004063 150ml, Neutral $20.00 

LBN-004057 500ml, Neutral $39.20 

LBN-004195 150ml, Medium Oak $20.00 

LBN-004190 500ml, Medium Oak $39.20 

LIBERON 0000 

STEEL WOOL 

Produced using a 

high quality steel to 

create crumble and 

dust resistant wool 

that is virtually oil 

free. This high quality 

steel wool is used for 

cleaning, preparing and maintaining wood 

and metal finishes. Specifically 0000 grade 

is used to cut back between coats of French 

polish, varnish and oil finishes. Used to clean 

and polish metals such as bronze, copper, 

chrome, stainless steel and aluminium. 


LBN-015063 100g $9.80 

LBN-015066 250g $15.80 

LIBERON DUST GRAB 

(TACK CLOTHS) 

Ideal for removing heavy 

dust from surfaces in 

the home, car or workshop. 

Impregnated with 

a unique blend of resins 

dust readily adheres 

to the tacky face of the 

cloth. Pack of 10. 

Order no. 

Price 

LBN-015052 $27.00 

LIBERON RETOUCH 

CRAYONS 

Used to fill scratches, nail 

holes, worm holes etc. in 

furniture and other woodwork. 

Rub the crayon 

across the scratch until 

it is filled, allow to harden 

then buff off the excess 

with a cotton cloth. 

Order no. 

Price 

LBN-014222 $16.00 

B. 

F. 

A. 

G. 

WEST SYSTEM BRAND EPOXY 


A. WES-PS-51-1.2L 1.2L Pump Set $39.00 

B. WES-105R-1L Epoxy Resin, 1L $44.00 

C. WES-SH-200ML Hardener, 200ml $16.00 

D. WES-105R-500ML 

Epoxy Resin, 

500ml $30.00 

E. WES-SH-100ML Hardener, 100ml $12.00 

F. WES-MSY Mini Syringe Set $4.00 

G. WES-105R-4L Epoxy Resin, 4L $125.00 

H. WES-SH-800ML Hardener, 800ml $45.00 

403 MICROFIBRE BLEND GAP FILLER 

A mix of cotton microfibre and colloidal silica 

used as a thickening agent for WEST SYS- 

TEM resin and hardener when used as an 

adhesive. 


WES-MF-1L 1L Bag $12.00 

WES-MF-4L 4L bag $38.00 

WES-MF-12L 12L Bag $95.00 

TWO PACK TECHNIGLUE 

SYSTEM 

A thixotropic prefilled 

epoxy gel, 

T E C H N I G L U E 

Construction Adhesive 

cures at 

room temperature 

to form high 

strength, structural and w a t e r p r o o f 

bonds. TECHNIGLUE has a unique consistency 

perfect for filling any surface voids within 

the bonded joint and minimising run-out. 

TECHNIGLUE is a 2:1 product and must be 

mixed accordingly. 


TGL-TGR-500ML 500ml resin $33.00 

TGL-TGFH-250ML 250ml hardener $20.00 

TGL-TGR-1L 1L resin $54.00 

TGL-TGFH-500ML 500ml hardener $31.00 

TGL-TGR-4L 4L resin $149.00 

TGL-TGFH-2L 2L hardener $89.00 

VERITAS ® CHAIR DOCTOR GLUE 

If a chair has a loose rung, an injection of 

Chair Doctor glue will first swell the rung and 

then bond it in position. 


05K99-01 2fl oz, 70g $12.00 

05K99-04 4fl oz, 170g $15.00 

C. 

D. 

E. 


Woodcarving 

A. B. 

FLEXCUT DETAIL KNIFE SET 

This detail knife set is an excellent start to 

any knife kit. Razor sharp and comfortable 

to use, these will be favourites from the start. 

The set includes a mini chip knife, mini detail 

knife and the extremely popular pelican knife 

as well as a block of Flexcut Gold honing 

compound. Weight: 180g. 

Order no. 

Price 

FLX-KN-400 $75.00 

25 PIECE CARVING SET 

Set includes 80mm wooden mallet, 2 genuine 

Arkansas sharpening stones, honing oil, 

Brienz carving knife and 20 carving chisels. 

Carving tools included are: 1-16, 1S-16, 

2-20, 3-3, 3-12, 3-25, 5-35, 7-20, 8-7, 8-18, 

8-25, 9-7, 8A-18, 9-15, 7L-25, 11-2, 11-10, 

15-3, 12-10 and 14-8. 3.1kg. 

Order no. 

Price 

PF-RLSET-25 $869.00 

A. PFEIL VIOLIN MAKER’S GOUGES 


PF-GL-1 270x30mm, 110g $99.00 

PF-GL-2 235x15mm, 80g $95.00 

PF-GL-3 205x12mm, 60g $89.00 

B. PFEIL VIOLIN MAKER’S 

PURFLING PICK 


PF-PURF 2mm cutting width $69.00 

FLEXCUT CHIP CARVING SET 

Our Chip Carving Set features our Chip 

Carving Knife, Mini-Chip Knife and Skew 

Knife. Everything you need to create the intricate 

geometric or freestyle patterns that 

are the hallmark of the craft. Lettering is also 

very much part of the art form. 

Order no. 

Price 

FLX-KN-115 $65.00 

12 

PIECE 

STARTER SET 

This set is ideal for 

the serious beginner. Set includes: 

1-8, 1S-8, 5-8, 5-20, 7-6, 7-14, 

7L-20, 8-4, 8A-10, 9-10, 11-3, 12-6 and sewn 

reinforced canvas roll-up. 1.1kg. 

Order no. 

Price 

PF-RLSET-12 $429.00 

PFEIL LARGE CURVED DRAWSHAVE 

Overall length of 430mm, cutting edge 

240mm. Cherry handles, supplied in a Goatskin 

case. Avg. Weight: 450g. 

Order no. 

Price 

PF-DS-C $119.00 

PFEIL LARGE HEAVY DUTY STRAIGHT 

DRAWSHAVE 

Overall length of 440mm, cutting edge 

250mm. As above except thicker heavy duty 

blade steel with an average weight of 670g. 

Order no. 

Price 

PF-DS-S $175.00 

FLEXCUT 

BEGINNER 

PALM AND 

KNIFE SET 

Our Beginner Palm & 

Knife Set is a great way to get started 

carving today. We have packaged our most 

popular palm tools and knives from our 

product line. Each set includes: KN12 Cutting 

Knife, KN13 Detail Knife, FR307 V-Tool 

and FR306 Gouge. 

Order no. 

Price 

FLX-KN-600 $79.00 

6 PIECE ‘D 

SIZE’ TOOL 

SET 

Includes: D 1-8, D 

1S-8, D 5-8, D 8-7, 

D 11-1 and D 12- 

2. 280g. 

Order no. 

Price 

PF-SET-6N $169.00 

8 PIECE STARTER SET 

This set is ideal for the serious beginner. Set 

includes: 1-12, 1S-12, 4-20, 5-12, 7-10, 9-4, 

12-8, KNIFE-12 and sewn reinforced heavy 

canvas roll-up. 750g. 

Order no. 

Price 

PF-RLSET-8 $289.00 

PFEIL 4 PIECE ‘D SIZE’ BEGINNERS 

SET 

Starter set of D Series (smaller handles) chisels 

and includes the following profiles: D 1-8, 

D 8-7, D 12-6 and Pfeil carving knife. 160g. 

Order no. 

Price 

PF-SET-4 $99.00 

PFEIL STRAIGHT DRAWSHAVE 

Overall length 310mm, 120mm cutting edge 

length, cherry handles, 120g. 

Order no. 

Price 

PF-DK-S $59.00 

PFEIL CURVE HANDLED STRAIGHT 

DRAWSHAVE 

Overall length: 290mm, 110mm cutting 

edge length, cherry handles, 120g. 

Order no. 

Price 

PF-DK-C $69.00 

PFEIL SCORP 

For hollowing out bowls, chairs etc. 80g. 


PF-SCORP 33mm $45.00 

PF-SCORP65 65mm $83.00 


111

Woodcarving 

PFEIL VIOLIN MAKER’S KNIVES 

All knives are 160mm long. 

Order no. Blade Width/Weight Price 

PF-GM1 3.5mm/15g $18.00 

PF-GM2 6mm/20g $18.00 

PF-GM3 9mm/25g $18.00 

PF-GM4 12mm/30g $18.00 

PF-GM5 15mm/35g $18.00 

PF-GM6 19mm/40g $18.00 

PFEIL HEAVY DUTY DRAYER GOUGES 

Slightly skewed edges, used for rough cutting. 

Double bevel for right or left use. Overall 

Length Approx: 300mm. 

Order no. Blade Width/Weight Price 

PF-D-50 50mm/310g $98.00 

PF-D-60 60mm/350g $109.00 

PF-D-70 70mm/390g $113.00 

PF-D-80 80mm/430g $123.00 

PFEIL DRAKE TOOLS 

Designed at the woodcarving school in 

Dovre, Norway. Used to clean up carved lettering 

and ornamental work. Blade length: 

110mm, width: 5mm. Average weight: 45g. 


PF-DRAKE Straight Blade $41.00 

PF-DRAKE-L Left Skew Blade $41.00 

PF-DRAKE-R Right Skew Blade $41.00 

INDIVIDUAL REPLACEMENT PFEIL 

HANDLES 


PF-H1 135 x 21mm, 33g $11.00 

PF-H2 135 x 22mm, 35g $9.00 

PF-H3 135 x 24mm, 38g $9.00 

PF-H4 135 x 26mm, 44g $9.00 

PF-H5 135 x 28mm, 52g $9.00 

PF-H6 135 x 30mm, 60g $9.00 


PF-HB 160 x 36mm, 90g $18.00 


PF-HD 115 x 20mm, 25g $9.00 


PF-HL 54 x 36mm, 15g $11.00 

PFEIL 6 PIECE LINO PALM SETS 

Palm chisel sets with Pear handles, ideal for 

small and detailed wood carving or lino print 

work. Tools are of the same high quality as all 

Pfeil carving tools, precisely ground and polished. 

Overall length: 125mm. Blade length: 

70mm. Approx. weight of kits for shipping 

purposes only: 220g. 


L5-3, L7-6, L7-10, 

PF-PALM-6-B 

L9-5, L11-1 & L12-1 

$133.00 


L8-3, L8-7, L9-2, L11- 

PF-PALM-6-C 

0.5, L12-4 & L15-2 

$133.00 

PFEIL 8 PIECE PALM CARVING TOOL SET 

This eight piece set is ideal for carving smaller 

pieces or for the beginner. Chisels have 

pear handles and are supplied in a Linden 

wood box. Blade length: 80mm. Set includes: 

B 1-12, B 1S-12, B 3-12, B 5-12, B 

8A-10, B 9-10, B12-8 and B 7-14. 850g. 

Order no. 

Price 

PF-SET-8A $226.00 

PFEIL 8 PIECE PALM CARVING TOOL SET 

This eight piece set is ideal for carving smaller 

pieces or for the beginner. Chisels have 


wood box. Blade length: 80mm. Set includes: 

B 2-12, B 4-12, B 7L-12, B 8-10, B 

9-7, B 11-7, B15-6 and B 25-10. 850g. 

Order no. 

Price 

PF-SET-8B $226.00 

PFEIL DELUXE 12 PIECE LINO PALM 

CARVING TOOL SET 

This is the largest set of Lino Palm Tools 

made by Pfeil. A deluxe carving set for fine 

detail work or those who prefer the feel of 

smaller handled chisels. These chisels have 


wood box, precisely ground polished and 

ready for use. Blade length: 70mm, Overall 

length: 125mm. Set includes: L 1-8, L 1s-8, 

L 1a-8, L 5-3, L 5-8, L 7-6, L 7-10, L 9-5, L 

11-1, L 11-3, L 12-1, L-12a-4. Weight of Kit is 

approx. 1050g. 

Order no. 

Price 

PF-PALM-12 $298.00 

A. 

B. 

PFEIL SCHALLER CARVING KNIVES 

Schaller knives have a crowned blade and 

rounded back so that they do not contact 

the work. Hence these knives can be used 

to carve concave curves and flat surfaces. 

Average weight for shipping 30g. 

Order no. Average length Price 

A. PF-SCHG 175mm $28.00 

B. PF-SCHK 160mm $28.00 

A. 

B. 

PFEIL CANARD CARVING KNIVES 

For especially fine chip carving. Blades have 

straight cutting edges and are ground thin. 

Plum handles, Avg. wgt 30g. 

Order no. Average length Price 

A. PF-CAG 175mm $28.00 

B. PF-CAK 160mm $28.00 

SET OF 4 

KNIVES 

Supplied in 

canvas chisel 

roll. Contains, 

P F - S C H G , 

PF-SCHK, PF- 

CAG & PF- 

CAK. 220g. 

Order no. 

Price 

PF-RO-4 $154.00 


W See full range of chisels online at www.carbatec.com.au 

Woodcarving 

3. STRAIGHT SHAFT CHISELS 


Order no. Size/g Price 

PF-1-2 2mm/40g $30.00 

PF-1-3 3mm/50g $30.00 

PF-1-5 5mm/50g $30.00 

PF-1-8 8mm/60g $30.00 

PF-1-10 10mm/80g $32.00 

PF-1-12 12mm/90g $32.00 

PF-1-14 14mm/110g $32.00 

PF-1-16 16mm/110g $32.00 

PF-1-18 18mm/120g $37.00 

PF-1-20 20mm/120g $37.00 

PF-1-22 22mm/140g $37.00 

PF-1-25 25mm/160g $46.00 

PF-1-30 30mm/190g $54.00 

PF-1-35 35mm/200g $56.00 

PF-1-40 40mm/230g $61.00 

1S. STRAIGHT SHAFT CHISELS 


PF-1S-2 2mm/40g $30.00 

PF-1S-3 3mm/50g $30.00 

PF-1S-5 5mm/50g $30.00 

PF-1S-8 8mm/60g $30.00 

PF-1S-10 10mm/80g $32.00 

PF-1S-12 12mm/90g $32.00 

PF-1S-14 14mm/105g $32.00 

PF-1S-16 16mm/100g $32.00 

PF-1S-18 18mm/120g $37.00 

PF-1S-20 20mm/120g $37.00 

PF-1S-22 22mm/140g $46.00 

PF-1S-25 25mm/140g $46.00 

PF-1S-30 30mm/170g $54.00 

PF-1S-35 35mm/190g $56.00 

PF-1S-40 40mm/220g $61.00 

INDIVIDUAL CARVING CHISELS 


PF-3-2 2mm/40g $30.00 

PF-3-3 3mm/40g $30.00 

PF-3-5 5mm/50g $30.00 

PF-3-8 8mm/60g $30.00 

PF-3-10 10mm/70g $32.00 

PF-3-12 12mm/80g $32.00 

PF-3-14 14mm/100g $32.00 

PF-3-16 16mm/100g $32.00 

PF-3-18 18mm/115g $37.00 

PF-3-20 20mm/120g $37.00 

PF-3-22 22mm/140g $46.00 

PF-3-25 25mm/150g $46.00 

PF-3-30 30mm/170g $54.00 

PF-3-35 35mm/170g $56.00 

PF-3-40 40mm/215g $61.00 



PF-5-2 2mm/50g $30.00 

PF-5-3 3mm/50g $30.00 

PF-5-5 5mm/50g $30.00 

PF-5-8 8mm/60g $30.00 

PF-5-10 10mm/80g $32.00 

PF-5-12 12mm/90g $32.00 

PF-5-14 14mm/90g $32.00 

PF-5-16 16mm/100g $32.00 

PF-5-18 18mm/105g $37.00 

PF-5-20 20mm/110g $37.00 

PF-5-22 22mm/130g $54.00 

PF-5-25 25mm/140g $54.00 

PF-5-30 30mm/170g $54.00 

PF-5-35 35mm/180g $56.00 

PF-5-40 40mm/215g $61.00 



PF-6-20 20mm/120g $37.00 



PF-2-2 2mm/50g $30.00 

PF-2-3 3mm/50g $30.00 

PF-2-5 5mm/50g $30.00 

PF-2-8 8mm/70g $30.00 

PF-2-10 10mm/80g $32.00 

PF-2-12 12mm/70g $32.00 

PF-2-14 14mm/100g $32.00 

PF-2-16 16mm/100g $32.00 

PF-2-18 18mm/120g $37.00 

PF-2-20 20mm/120g $37.00 

PF-2-22 22mm/140g $46.00 

PF-2-25 25mm/140g $46.00 

PF-2-30 30mm/170g $54.00 

PF-2-35 35mm/190g $56.00 

PF-2-40 40mm/240g $61.00 



PF-7-2 2mm/50g $31.00 

PF-7-4 4mm/50g $31.00 

PF-7-6 6mm/60g $31.00 

PF-7-8 8mm/80g $31.00 

PF-7-10 10mm/70g $32.00 

PF-7-12 12mm/90g $32.00 

PF-7-14 14mm/90g $32.00 

PF-7-16 16mm/115g $37.00 

PF-7-18 18mm/120g $37.00 

PF-7-20 20mm/120g $46.00 

PF-7-22 22mm/130g $46.00 

PF-7-25 25mm/140g $46.00 

PF-7-30 30mm/170g $56.00 

PF-7-35 35mm/210g $61.00 

PF-7-40 40mm/235g $68.00 


113

Woodcarving 

W See full range of chisels online at www.carbatec.com.au 



PF-8-2 2mm/50g $31.00 

PF-8-3 3mm/50g $31.00 

PF-8-4 4mm/50g $31.00 

PF-8-7 7mm/60g $31.00 

PF-8-10 10mm/60g $32.00 

PF-8-13 13mm/100g $32.00 

PF-8-16 16mm/110g $37.00 

PF-8-18 18mm/120g $37.00 

PF-8-20 20mm/135g $46.00 

PF-8-22 22mm/140g $46.00 

PF-8-25 25mm/150g $46.00 

PF-8-30 30mm/180g $56.00 

PF-8-35 35mm/230g $61.00 

PF-8-40 40mm/245g $68.00 

12. 60° V STRAIGHT SHAFT CHISEL 


PF-12-1 1mm/50g $34.00 

PF-12-2 2mm/50g $34.00 

PF-12-3 3mm/50g $34.00 

PF-12-4 4mm/50g $34.00 

PF-12-6 6mm/60g $34.00 

PF-12-8 8mm/70g $39.00 

PF-12-10 10mm/100g $39.00 

PF-12-12 12mm/110g $47.00 

PF-12-14 14mm/110g $47.00 

PF-12-20 20mm/190g $78.00 

13. 90° V STRAIGHT SHAFT CHISEL 



PF-9-1 1mm/50g $31.00 

PF-9-2 2mm/50g $31.00 

PF-9-3 3mm/50g $31.00 

PF-9-4 4mm/55g $31.00 

PF-9-5 5mm/50g $31.00 

PF-9-7 7mm/60g $31.00 

PF-9-10 10mm/80g $32.00 

PF-9-13 13mm/110g $32.00 

PF-9-15 15mm/110g $37.00 

PF-9-18 18mm/140g $37.00 

PF-9-20 20mm/160g $46.00 

PF-9-22 22mm/170g $46.00 

PF-9-25 25mm/180g $46.00 

PF-9-30 30mm/210g $56.00 

PF-9-35 35mm/250g $61.00 

PF-9-40 40mm/265g $68.00 



PF-11-0.5 0.5mm/40g $32.00 

PF-11-1 1mm/40g $32.00 

PF-11-1.5 1.5mm/40g $32.00 

PF-11-2 2mm/40g $32.00 

PF-11-3 3mm/50g $32.00 

PF-11-4 4mm/50g $32.00 

PF-11-5 5mm/50g $32.00 

PF-11-7 7mm/70g $32.00 

PF-11-10 10mm/80g $36.00 

PF-11-12 12mm/120g $41.00 

PF-11-15 15mm/130g $41.00 

PF-11-18 18mm/150g $47.00 

PF-11-20 20mm/180g $54.00 

PF-11-25 25mm/200g $56.00 

PF-11-30 30mm/220g $62.00 


PF-13-1 1mm/50g $34.00 

PF-13-2 2mm/50g $34.00 

PF-13-3 3mm/50g $34.00 

PF-13-4 4mm/50g $34.00 

PF-13-6 6mm/60g $34.00 

PF-13-8 8mm/70g $39.00 

PF-13-10 10mm/100g $39.00 

PF-13-12 12mm/110g $47.00 

PF-13-14 14mm/110g $47.00 

PF-13-20 20mm/190g $78.00 

PF-13-30 30mm/210g $78.00 

7L. LONG BENT SHAFT CHISEL 


PF-7L-4 4mm/50g $36.00 

PF-7L-6 6mm/55g $38.00 

PF-7L-10 10mm/70g $38.00 

PF-7L-14 14mm/90g $38.00 

PF-7L-18 18mm/110g $43.00 

PF-7L-20 20mm/110g $46.00 

PF-7L-25 25mm/140g $51.00 

PF-7L-30 30mm/170g $61.00 

PF-7L-35 35mm/220g $61.00 


A. 

B. 

C. 

D. 

E. 

F. 

G. 

H. 

CHIP CARVING KNIVES 

Finest quality steel, ground and polished, 

ready for use. Cherry wood handles. Average 

overall length 160mm. Average weight 

for shipping purpose: 30g. 

Order no. 

Price 

A. PF-KNIFE-1 $20.00 

B. PF-KNIFE-2 $20.00 

C. PF-KNIFE-3 $20.00 

D. PF-KNIFE-4 $20.00 

E. PF-KNIFE-5 $20.00 

F. PF-KNIFE-6 $20.00 

G. PF-KNIFE-7 $20.00 

H. PF-KNIFE-8 $20.00 

I. PF-KNIFE-9 $20.00 

J. PF-KNIFE-10 $20.00 

K. PF-KNIFE-11 $20.00 

L. PF-KNIFE-12 $20.00 

M. PF-KNIFE-13 $20.00 

N. PF-KNIFE-14 $22.00 

O. PF-KNIFE-15 $22.00 

BRIENZ CARVING KNIFE LARGE 

Overall length 185mm. 30g. 

Order no. 

Price 

PF-BRIE-G $24.00 

BRIENZ CARVING KNIFE LARGE 

Overall length 175mm. 30g. 

Order no. 

Price 

PF-BRIE-K $24.00 

FLEXCUT MICRO PALM 

SET 

Designed for extreme detail used in netsuke 

or caricature carving. These tools have 

their edges forged down even thinner than 

our other palm tools. The 45° V-tool offers a 

deep, dark, visible cut while keeping an ultra 

narrow width. 360g. 

Order no. 

Price 

FLX-FR-804 $79.00 

I. 

J. 

K. 

L. 

M. 

N. 

O. 

FLEXCUT TM SLIP- 

STROP KIT 

This wooden 

form has 

been specially 

profiled 

to allow for polishing 

and deburring the 

hard to reach areas on the inside of 

V-tools and gouges. Kit quickly polishes all 

hardened steels. 130g. 

Order no. 

Price 

FLX-PW-12 $17.00 

FLEXCUT TM 

GOLD TM 

POLISHING 

COMPOUND 

Specially formulated to apply like a crayon. 

Its blend of aluminium and titanium oxide 

provide a balance between aggressive removal 

of hardened tool steel and offering a 

high-colour polish. 130g. 

Order no. 

Price 

FLX-PW-11 $11.00 

FLEXCUT TM 

CARVING KNIFE 

SET 

Our four most popular 

carving knives 

together in one set, 

complete with tool 

roll. 230g. 

Order no. 

Price 

FLX-KN-100 $99.00 

FLEXCUT TM 

DELUXE PALM 

SET 

This set is a combination. 

The 

regular palm for 

detail and the wide 

format for roughing-out makes this a great 

collection in one convenient box. 725g. 

Order no. 

Price 

FLX-FR-405 $139.00 

FLEXCUT TM 

PORTABLE 

CARVING SET 

Excellent for the travelling 

carver. The set 

consists of a palm 

handle & ten interchangeable 

blades. 

725g. 

Order no. 

Price 

FLX-SK-107 $109.00 

FLEXCUT TM WHITTLIN’ JACK 

CARVING KNIFE 

Features a Detail Knife and 

Roughing Knife yet weighs in at 

only 85g. It’s just over 10cm 

long when closed, so 

it neatly fits in 

your pocket. 

Order no. 

Price 

FLX-JKN-88 $62.00 

Woodcarving 

FLEXCUT TM 

STARTER 

CARVING 

SET 

The most 

c o m p l e t e 

carving set all 

in one box. It 

has everything you need, whether it be for 

mallet, palm, or knife carving. The 16 gouge 

profiles featured in this kit are not included in 

any other SK carving set. 950g. 

Order no. 

Price 

FLX-SK-108 $209.00 

FLEXCUT TM 

4 PIECE 

SCORP SET 

Our new Scorp set puts all of 

our profiles into one handy 

tool roll. As an added bonus 

each set includes a specially 

shaped strop (compound n o t 

included) to help maintain the edge. 230g. 

Order no. 

Price 

FLX-KN-150 $89.00 

FLEXCUT DRAWKNIFE 

This draw knife has 5 inches of workable 

edge, designed to flex around contours 

where large amounts of stock need to be 

removed quickly. The curved edge gives a 

skew-like cutting action for a low resistance 

cut. 125g. 

Order no. 

Price 

FLX-KN-16 $49.00 

7 PIECE 

JAPANESE 

CARVING 

CHISEL SET 

Set contains: 4 x gouges, 

1 x skew, 1 straight 

and 1 x v-chisel. 240g. 

Order no. 

Price 

PGC-7 $65.00 

24” MAGNETIC BAR 1.8kg 

Order no. 

Price 

ES-10024 $29.00 

CARBA-TEC ® HEAVY DUTY 

BENCH MOUNTED 

CARVERS VISE 

Optional extra faceplates allow 

you to have multiple works in 

progress. 

Order no. 

Price 

CV-236 $109.00 


115

Woodcarving 

VERITAS TM 

CARVER’S 

VISE 

A good carver’s 

vise should be 

adjustable in all 

three axes. This 

one has full rotation 

in two axes 

and 3” of height adjustment in the third axis. 

But more important, it has controlled release; 

when you relieve the clamping pressure, 

a combination of internal springs and 

o-rings provides residual resistance so that 

your work does not suddenly fall or rotate. 

For quick interchange of workpieces, spare 

3-1/2” dia. mounting plates are available. 


05G20-01 Carver’s Vice $129.00 

05G20-02 Dog Hole Mount $15.00 

05G20-03 3-1/2” Plate with Rod $32.00 

05G20-04 2” Mounting Plate $19.00 

MICROPLANE 

Razor-sharp, stainless 

Microplanes ® for 

rapid shaping of wood, plastics, rubber, auto 

body fillers, vinyl or asphalt tile, composites 

and other non-metallic materials. The exclusive 

Microplane ® process creates extremely 

sharp teeth for fast, smooth, low-effort cutting. 

SQUARE MICROPLANE ® 


MP-30019 Small-3-7/8”x7/32”, 30g $13.00 

MP-30012 Large-8”x1/2”, 100g $19.00 

ROUND MICROPLANE ® 


MP-30018 Small- 3-3/8”x11/32”dia. 30g $14.00 

MP-30011 Large-8”x5/8”dia. 100g $19.00 

MICROPLANE ® WITH REPL. BLADE 

Order no. 

Price 

MP-32000 $19.00 

ROTARY SHAPERS 


MP-30043 1” Rotary Shaper $19.00 

MP-30042 1” Repl. Blade $12.00 

MP-30041 2” Rotary Shaper $19.00 

MP-30040 2” Repl. Blade $13.00 

OPTIONAL BLADES TO SUIT MP-32000 HANDLE 


MP-32003 Fine-cut, flat blade $14.00 

MP-32004 Fine-cut, half round $14.00 

MP-32005 Fine-cut, right angle $14.00 

MP-32006 Coarse, flat $14.00 

MP-32001 Coarse, half round $14.00 

MP-32002 Coarse, right angle $14.00 

MINI GRINDER 

Has been designed to compliment the Arbortech 

100mm (4”) range of woodworking 

blades. The tool utilises small 50mm (2”) 

accessories, which when fitted to the Mini- 

Grinder allow incredible access and control. 

Kit includes four sanding discs and one 

spare cutting blade. 1.83kg. 

Order no. 

ARB-MIN300 

7. 

6. 

1. INDUSTRIAL SHAPER 

Similar to Woodcarver Pro but with replaceable 

tungsten carbide teeth, making it suitable 

for use on a wider range of materials. 240g. 

Order no. 

ARB-IND100 

2. INDUSTRIAL TEETH & SCREWS 

Replacement for ARB-IND100. 

Order no. 

Price 

ARB-IND012 

$60.00 

3. WOODCARVER PRO-4 

A universal tool for trades people, crafts people 

& sculptors. Ideal for sculpting, carving 

& cutting. 

Order no. 

Price 

ARB-WCB400 

$51.50 

4. MINI TCT BLADE 

Resharpenable 50mm blade. 55g. 

Order no. 

ARB-MIN012 

5. 

5. MINI GRINDER DIAMOND BLADE 

50mm blade for cutting or grinding tiles, 

stone and most masonry products. 45g. 

Order no. 

ARB-MIN016 

6. MINI GRINDER BLADES 

Mini versions of the Woodcarver Pro 4. 

50mm diameter. Pack of two. 45g. 

Order no. 

ARB-MIN001 

7. TUFF-CUT BLADE 

115mm diameter blade with re-sharpenable 

tungsten teeth. Perfect for heavy duty work. 

Order no. 

ARB-TUF115 

1. 

4. 

Price 

$275.00 

2. 

3. 

Price 

$156.50 

Price 

$33.00 

Price 

$26.00 

Price 

$21.00 

Price 

$79.00 

ECONOMY 

RIFFLER FILE 

SET 

Normally a similar 

10 piece set would 

cost 3 to 4 times our 

price. These wood files are high carbon, 

hardened steel. Length 180mm. 300g. 

Order no. 

Price 

7508 $22.00 

200MM WOOD 

RASP SET 

These rasps are double-sided, 

very sharp 

and cut aggressively. 

Use with caution! 

620g. 

Order no. 

Price 

WRS-3PCE $17.00 

ARCHER TM POWER CARVING KIT 

1/4hp variable speed motor with precision 

foot controller, adjusts motor 

speed from 0 - 20,000 rpm. Includes 

rotary handpiece with 3 jaw precision 

chuck, capacity of 0 - 4mm. 

Ideal for rotary carving, 

polishing, grinding and 

buffing, etc. 4.7kg. 


CT-33 Kit $279.00 

CT-24901 Stand $39.00 

CARBA-TEC ® 

CARVING DISCS 

FINE DISC 

With tungsten carbide 

flakes, the coarse disc 

(24 grit) is more aggressive than the fine 

disc. Suits most 4” grinders. Arbor size 

22mm. 120g. 


CD-4 Fine $12.00 

CD-4C Coarse $12.00 

PFEIL ARKANSAS 

SLIP STONES 

Complete set of four 

slip stones in various 

shapes, suitable for all 

carving chisels, gouges. 

Used with honing oil. 175g. 

Order no. 

Price 

PF-ARK-SET $88.00 

PFEIL 

A. 

LEATHER 

STROP 

Premium fine 

calf leather mounted on a wooden block. 


A. PF-ST-R1 120mm long $41.00 

B. PF-ST-R2 Double Sided 150mm $72.00 

B. 


Pens, Clocks & Craft 

A. B. 

C. D. 

E. F. G. 

A. 

A. SILVER PLATE SALT & PEPPER INSERTS 

B. 


SP-7050 Tube Approximately 25 x 55mm. 60g. $14.00 

B. STAINLESS STEEL SHAKER TOPS 

Simply drill a 32mm diameter hole and clip the spring sided tops in. 

C. 

D. 

PEWTER COLOURED POTPOURRI LIDS 

Order no. Description Diameter Price 

A. PL-3 Hummingbird 80mm $5.00 

B. PL-1 Roses 80mm $5.00 

C. PL-6 Butterfly 80mm $5.00 

D. PL-5 Basket 80mm $5.00 

PEWTER POTPOURRI LIDS 

Order no. Description Diameter Price 

E. PL-7 Brolga 85mm $12.00 

F. PL-8 Iris 85mm $12.00 

G. PL-9 Kookaburra 85mm $12.00 


ST-35 Overall dia. 35mm. Pack of 6. 30g. $13.00 

C. EASIGRIND EASY FIT SALT/PEPPER MILL MECHANISM 

Carba-Tec ® introduces the Easigrind easy fit ceramic mill mechanism. 

Featuring a preassembled top quality mill and hidden top 

screw. Salt / Pepper / Spice mills can be produced with only a few 

tools by drill the blank with Forstner style bits, and turning to the 

desired external shape. Quick and easy construction and assembly. 

Supplied as a universal (Salt, Pepper or Spice) mill, with one length 

that can be shortened by simple cutting the drive rod. Adjustable 

grind and rust/corrosion proof construction. 

Order no. 

Price 

EASIGRIND-17 $19.00 

D. CERAMIC SALT/PEPPER MILL MECHANISM 

The latest and greatest innovation in spice grinding is ceramic mill 

components. Ceramic mills have the advantage of handling both 

salt, and pepper with the one mechanism. They are rustproof, with 

stainless steel components and an aluminium rod, and are available 

in a variety of popular sizes. Full instructions are provided. 


GRIND-7 7”/178mm $9.00 

GRIND-10 10”/254mm $9.00 

GRIND-12 12”/305mm $9.00 

GRIND-17 17”/432mm $9.00 

RARE EARTH MAGNETS 

Used in boxmaking as a concealed 

lid catch and many other 

purposes. Available by road 

freight only. 


REM-3310 3mm dia. x 3mm thick, pk 10. $7.00 



REM-8510 8mm dia. x 5mm thick, pk 10 $14.00 




B. 

A. 

PYROGRAPHY PEN SETS 

German made hot poker units, 230v, 26 watts. A. The pen by itself 

plus one combination brass drawing/calligraphy tip. B. This deluxe 

kit comes in a wooden box, incl. extras: 4 brass tips, screwdriver, 

tweezers, wire brush, pattern book and a metal tray for storing hot 

tips. 


A. LT-5026-45-01 Pen with one tip $59.00 

B. LT-5027-45-08 Pen in wooden box with extras $79.00 

HOT WIRE PROFESSIONAL PYROGRAPHY SET 

Made in Germany. Stepless electronic with constant temperature 

control, infinitely variable between approx. 350°C and 800°C. 230v- 

30watts. Powerful enough for shading. Suitable for use on wood, 

cork and leather. 

C. 

Order no. 

Price 

C. LT-5216-45-02 $239.00 

IRONCORE ® VARIABLE TEMPERATURE PYROGRAPHY SET 

Australian made heavy duty woodburning unit. Features an infinitely 

variable heat. Set includes two wire nibs, heavy duty handpiece with 

separate transformer with a handpiece rest on top of the unit. Suitable 

for any level of woodburning. 

Order no. 

Price 

D. IC-1 $259.00 

D. 


117


1. 2. 

3. 

4. 

5. 6. 

7. 

8. 

9. 10. 11. 12. 

13 14. 15. 16. 

17. 18. 19. 20. 

21. 22. 23. 24. 

WOODEN PEN BLANK PACKS 

Nominal size: 126mm x 15mm x 15mm. All 

blanks are pre-drilled to 7mm. 


Curly Jarrah, Goldfields 

WPP-1 Burl, Flame Sheoak, Woody $11.00 

Pear Lace Sheoak 

WPP-2 

Western Rosewood, 

Banksia, Black Palm, Lace $11.00 

Sheoak, Birdseye Sheoak 

WPP-3 

Sandalwood, Macassar 

Ebony, Black Palm, Western $12.00 

Rosewood, Huon Pine 

WPP-4 

Cocobolo, Imbuia (Brazilian 

Walnut) Purple Heart, $14.00 

Marfin and Brazilwood 

WPP-5 

Padouk, Wenge, African 

Ash, Bubinga, Sapele 

(African Mahogany) 

$12.00 

QUICK ACTION 

SELF-CENTRING 

PEN BLANK DRILLING JIG 

This improved version of our pen blank 

vise drills in the exact centre of your pen 

blanks. The vise jaws move in and out together 

ensuring a precisely drilled hold in the 

centre of your pen blank. 1.84kg. 

Order no. 

Price 

CT-PV4 $79.00 

ACRYLIC PEN BLANKS Nominal size: 

152mm x 16mm x 16mm. 

Order no. 

Price 

1. APB-F1069 $4.00 

2. APB-AS35 $4.00 

3. APB-AS56 $4.00 

4. APB-AS116 $4.00 

5. APB-AS93 $4.00 

6. APB-AS37 $4.00 

7. APB-AS72 $4.00 

8. APB-AS73 $4.00 

9. APB-AS74 $4.00 

10. APB-S83 $4.00 

11. APB-AS128 $4.00 

12. APB-S42 $4.00 

13. APB-AS70 $4.00 

14. APB-S26 $4.00 

15. APB-S27 $4.00 

16. APB-S28 $4.00 

17. APB-S29 $4.00 

18. APB-S41 $4.00 

19. APB-S01 $4.00 

20. APB-S09 $4.00 

21. APB-AS188 $4.00 

22. APB-AS190 $4.00 

23. APB-AS191 $4.00 

24. APB-AS192 $4.00 

SPRING CALIPER & 

DIVIDER 

Sets include 1 inside caliper, 

1 outside caliper and 

1 spring divider. Two sets 

available, 150mm and 

200mm. 


CT-154120 6” Set $24.00 

CT-154130 8” Set $34.00 

MICRO-MESH TM 

Micro-Mesh TM is a long lasting cloth backed 

sanding product that is applied to a foam 

cushion layer. The paper itself is much like 

wet and dry but the addition of the cushion 

layer allows more control of the cutting action. 

While all sandpaper creates a scratch 

pattern the Micro-Mesh TM pattern is very fine 

promoting consistent sanding and extraordinary 

levels of gloss in acrylics and wood 

alike. 

Order no. 

Price 

SP-MMESH-SET $25.00 

COLT TM PEN DRILLS 

Top quality M2 steel is used to produce these 

bits that drill quickly and accurately in pen 

materials like acrylic and timber. Cuts 6 times 

faster & clears chips better. 

Order no. 

Price 

COLT-10150700 $15.00 

CMT HIGH CARBON & HSS BRAD 

POINT DRILLs 

Bits have fine cutting edges and brad pointed 

tips to minimise tearout. Made in Germany. 


517-070-31 Carbon Steel $9.00 

516-070-51 HSS $15.00 

PEN PRESS 

The perfect helper when wanting to press 

those tight fitting pen components together. 

The unit adjusts easily to fit any pen kit. Applies 

up to 130kg of pressure. Clamps easily 

to a bench. 

Order no. 

Price 

CT-PAP1 $59.00 

NEW 

DELUXE PEN MANDREL 2MT 

The advantages of this pen mandrel 

design are that spacers are no longer necessary 

to make up the difference between the 

length of the pen blanks and the mandrel. 

This also helps to eliminate any vibration encountered 

when turning blanks on a longer 

than necessary mandrel shaft. 

Order no. 

Price 

AXM-211323 $79.00 

MORSE TAPER 1/4” PEN MANDREL SET 

Either mandrel can be unscrewed from the 

MT and used in a drill chuck if preferred. 


MAND-91 No. 1 MT $16.00 

MAND-92 No. 2 MT $16.00 

SLEEVE-6 Brass repl. bush $12.00 

PEN MILL 

Trims and squares wood 

and brass tubes for pen making. 

Suitable for Pen - 1, Pencil - 1, Pen-1- 

AUS. NOTE: Sold without handle. 40g. 

Order no. 

Price 

PEN-MILL $25.00 



BALL POINT PEN PARTS 

Gold plated, not epoxy coated, 100g pack. 

1/4” mandrel required. Pack of 5. 

Order no. 

Price 

PEN-1N $12.00 


100g pack. 1/4” mandrel required. Pack of 5. 

Order no. 

Price 

PEN-1 $17.00 


(AUSTRALIA CLIP) 


Order no. 

Price 

PEN-1-AUS $17.00 



Order no. 

Price 

PEN-1V $23.00 

COMFORT STYLE BALL POINT PEN 

PARTS 

100g pack. 1/4” mandrel required plus 

BUSH-8. Pack of 5. 


PEN-8G Gold Finish $19.00 

PEN-8RH Rhodium Finish $33.00 

BUSH-8 Bush $8.00 

COMFORT STYLE PENCIL PARTS 




PENCIL-8G Gold Finish $30.00 

PENCIL-8RH Rhodium Finish $47.00 


DELUXE PEN PARTS 

40g pack. 1/4” mandrel required plus BUSH- 

JR. Platinum coated. Sold individually. 


PEN-JR-R Roller Ball $29.00 

PEN-JR-F Fountain $33.00 

BUSH-JR Bush $10.00 

A. 

C. 

B. 

WOODEN PEN BOXES 

Pens shown not included. 


A. PB-01M Single Maple $6.00 

B. PB-02M Double Maple $6.00 

C. PB-01R Single Rosewood $6.00 

D. PB-02R Double Rosewood $6.00 

48 PLACE 

DELUXE PEN 

BOX 

Pens not 

included. 560g. 

Order no. 

Price 

C-08 $42.00 

A. 

D. 

BALL POINT PEN PARTS (CLICK 

MECHANISM) 




PEN-9 Pen Parts $32.00 


ROLLER BALL PEN PARTS - CLIP ON 

CAP 


BUSH-2-3. Pack of 5. 


RL-101 Pen Parts $43.00 

BUSH-2-3 Bush $10.00 



BUSH-BT. Pack of 5. 


BT-401 Gold Finish $29.00 

BUSH-BT Bush $13.00 

A. 

C. 

D. 

B. 

PEN HOLDERS/BOXES 

Pens shown not included. 

Order no. Description 

Price 

A. C-04 1 place case $1.00 

B. C-05 1 or 2 place case $1.90 

C. C-06 1, 2 or 3 place case $5.90 

D. C-07 1 or 2 place case $3.90 

A. 

B. 

B. 

VELVET SLEEVES 

Economical alternative to more expensive 

box presentation cases. Pens not included. 

Pack of 10. Weight: 30g. 


A. VS-BLUE Blue $4.00 

B. VS-BLACK Black $4.00 

PROFILE MASTER 

Allows accurate 

out lining of various 

shapes and forms. 

Great for copying 

difficult moulding 

profiles, or creating 

your own templates. 

Comes in two 

sizes, 125mm and 250mm. 

Order no. 

Price 

PCG-908 $12.00 

PCG-908A $19.00 



BUSH-BT. Pack of 5. 


BT-401P Platinum $39.00 

BT-401BT Black TiN $45.00 

BUSH-BT Bush $13.00 

WOODEN PEN BOXES 

Bubinga/Maple pen/pencil boxes, useful for 

presentation or storage. Two styles available. 


A. BOX-7 Flip Top Lid $10.00 

B. BOX-15 Sliding Lid $12.00 

18 PLACE PEN 

ROLL 

Handy way to store 

or display finished 

pens. 75g. 

Order no. 

Price 

PR-7029 $15.00 


119


Step 1. Choose our Quartz Clock Movement 

MINI SIZE QUARTZ CLOCK 

Made in the U.S.A. Dimensions: 2-1/8”x21/8”x5/8”, Shaft diameter 

5/16”, On/Off switch, front loading hanger, step second hand, requires 

“AA” battery, (Not included) Accurate to within 10 seconds 

per month. 

Price includes: 

• Face Numbers (choose from next page) 

• Hour, minute and second hand 

(choose from step 2) 

• Hanger 

• Nuts 

• Washer 

Order no. 

Step 2. Choose your Hour & Minute Hands 

A. 

B. 

C. 

D. 

E. 

For dials 

up to 

Threaded 

Shaft 

F. 

G. 

H. 

I. 

J. 

Overall 

Shaft 

Weight 

Price 

CLK-7160 6mm thick 8mm 16mm - $11.00 




Order no. 

Minute Hand 

Length 

Hour Hand 

Length 

Colour 

A. 1211-B 39mm 25mm Black 

A. 1211-G 39mm 25mm Gold 

B. 1194-B 49mm 36mm Black 

B. 1194-G 49mm 36mm Gold 

C. 1093-B 35mm 29mm Black 

C. 1093-G 35mm 29mm Gold 

C. 1210-B 74mm 64mm Black 

C. 1210-G 74mm 64mm Gold 

D. 1075-B 80mm 60mm Black 

D. 1075-G 80mm 60mm Gold 

D. 1032-B 111mm 80mm Black 

D. 1032-G 111mm 80mm Gold 

E. 1201-B 53mm 37mm Black 

E. 1201-G 53mm 37mm Gold 

F. 1206-B 45mm 35mm Black 

F. 1206-G 45mm 35mm Gold 

G. 1079-B 87mm 64mm Black 

G. 1079-G 87mm 64mm Gold 

G. 1077-B 120mm 101mm Black 

G. 1077-G 120mm 101mm Gold 

H. 1065-B 88mm 65mm Black 

H. 1065-G 88mm 65mm Gold 

I. 1063-B 77mm 60mm Black 

I. 1063-G 77mm 60mm Gold 

J. 1340-B 64mm 45mm Black 

J. 1340-G 64mm 45mm Gold 

Hands are available separately from CLK kits at $1.50 per set. 

Step 3. Choose your Sweep Second Hands 

A. 

B. 

C. 

D. 

E. 

F. 

Order no. Sweep Hand Colour 

A. A-40B 129mm Black 

A. A-40G 129mm Gold 

B. 1171-RU 60mm Red 

B. 1171-BU 60mm Black 

B. 1171-GU 60mm Gold 

C. 1191-RU 71mm Red 

C. 1191-BU 71mm Black 

C. 1191-GU 71mm Gold 

D. 1151-RU 46mm Red 

D. 1151-BU 46mm Black 

D. 1151-GU 46mm Gold 

E. 1285-RU 77mm Red 

E. 1285-BU 77mm Black 

E. 1285-GU 77mm Gold 

F. A-35B 71mm Black 

F. A-35G 71mm Gold 

Hands are available separately from CLK kits at $1.50 per set. 

Step 4. Choose your Clockface Numbers 

All numbers come with adhesive backs, and are available in either 

black or gold. Please specify your preference when ordering 

(replace the B at the end of the code with G if wanting gold). 

Order no. 

Roman 

542B 

546B 

550B 

558B 

562B 

Height 

9.5mm 

12.7mm 

16mm 

25mm 

32mm 

Order no. 

Arabic 

502B 

506B 

510B 

514B 

518B 

522B 

Height 

9.5mm 

12.7mm 

16mm 

19mm 

25mm 

32mm 

Numbers are 

available 

separately from 

CLK kits at 

$1.50 per set. 

West German Long Case 

& Regular Clock Movements 

Go to www.carbatec.com.au to see our full range 



A. B. C. D. 

CLOCK INSERTS 

Order no. Description Diameter Weight Price 

A. SC-90C Clock insert 90mm 76g $31.00 

B. IS-7-GA Clock insert Fit up 100mm 180g $17.00 

C. IS-7-GR Clock insert Fit up 100mm 170g $17.00 

Clock insert - AA battery 

D. S-90C not included 

98mm 75g $24.00 

A. B. 

BAROMETERS 


A. TE-1071 Barometer - Brushed Gold 70mm 70g $41.00 

Barometer - AA battery not 

B. S-70B required 

73mm 55g $31.00 

A. B. C. 

PLASTIC CLOCK INSERT 


S-50C 

Plastic Roman Clock 

insert SR626SW battery 

included 

50mm 10g $18.00 

A. B. C. 

COMBINATION THERMOMETERS/HYGROMETERS/ 

BAROMETERS/CLOCKS 


A. TH-070 Thermometer/Hygrometer 70mm 110g $69.00 

A. TH-085 Thermometer/Hygrometer 85mm 150g $76.00 

Clock with Quartz Movement 

B. C-070 

70mm 130g $76.00 

Clock with Quartz Movement 

B. C-085 

85mm 170g $80.00 

C. B-070 Barometer 70mm 110g $80.00 

C. B-085 Barometer 85mm 170g $92.00 

D. E. 

HYGROMETERS 


A. TE-1073 Hygrometer-Brushed Gold 70mm 50g $28.00 

Hygrometer - Solid Polished 

Brass Bezel, white 

B. H-085 face and glass cover. Surface 

85mm 150g $83.00 

mount type - Made in 

Germany 

Hygrometer - Plastic - Battery 

required 

C. S-36H 

36mm 10g $13.00 

Hygrometer - AA battery 

D. S-70H not required 

73mm 40g $20.00 

Hygrometer - AA battery 

E. S-106H not required 

106mm 55g $27.00 

SOLID BRASS 40 YEAR CALENDAR 

Shows dates from 1996 to 2035. Solid 

brass, 63mm diameter. 

Order no. 

Price 

CB-63 $6.00 

A. B. C. D. 

THERMOMETERS 


Thermometer - Plastic - 

A. S-36T Battery not required 

36mm 10g $10.00 

Thermometer - Brushed 

B. TE-1072 Gold 

70mm 80g $26.00 

Thermometer - AA battery 

C. S-70T not required 

73mm 40g $19.00 

Thermometer - Solid Polished 

Brass Bezel, white 

D. T-085 face and glass cover. Surface 

85mm 190g $73.00 

mount type - Made in 

Germany 

INTERLOCK 

SIGNMAKER’S TEMPLATES 

Templates interlock to form a stable pattern as you rout signs with appropriate 

carbide router bits and bushings. Secure patterns to your 

work surface with Painters Tape, masking tape or double sided tape. 

Requires the use of a plunge router that accepts standard 1-3/16” 

template guides. Requires router bit 814-095-11. You also have the 

option to upgrade to a brass bush (RK-BUSH12). 

The Letters Kit includes a total of 40 letters with duplicates of common 

letters and three spacers. Numbers and Symbols Kit includes: 

1, 1, 2, 2, 3, 3, 4, 4, 5, 5, 6, 6, 7, 7, 8, 8, 9, 9, 0, 0, !, @, #, $, ‘, ?, ., / 

and &. 


RK-30610 2-1/4” Letter Kit $24.00 

RK-30599 2-1/4” Number & Symbols Kit $24.00 


121


A. B. 

BOTTLE OPENER PARTS 

Cast in solid brass, this is a 

functional and easy project for 

all woodturners. A turned handle 

is all that is required to finish 

this useful kitchen utensil. Sold 

individually. 45g. 

Order no. 

Price 

BO-7007 $16.00 

CORKSCREW 

3-1/2” long. Nickel plated, top 

quality. Sold in packs of 5. 

Weight: 100g. Wooden handle is 

not included. 

Order no. 

Price 

IN-122 $19.00 

SHIP’S WHEEL 

NUTCRACKER 

Solid brass with fixing bolt. Wood 

not included. 650g. 

Order no. 

Price 

IN-127 $43.00 

PERFUME ATOMISER KIT 

Suitable for purse sprays, holds 

up to 3ml. Made with a quality 

French mechanism and very 

easy to assemble. Gold plated. 

Requires a 1/4” mandrel (MAND- 

91/92) and bush set (BUSH-AK). 

Order no. 

Price 

AK-1 $12.00 

BUSH-AK $15.00 

PERFUME APPLICATOR 

After assembly, the tip is soaked 

into a favourite perfume and can 

be applied anytime. Pen-1 tubes 

make an excellent sleeve to take 

up slack on 1/4” mandrels. 60g. 

Order no. 

Price 

PA-1 $32.00 

Products shown at finished stage. 

PEN TRUMPET 

Solid brass, 24k gold plated. Inside 

diameter 10mm. 20g. 

Order no. 

Price 

TR-1 $4.00 

CANDLE CUPS 

Solid brass. Approximately 

25mm drill hole required. Pack 

of 10. 100g. 

Order no. 

Price 

CC-10PCE $14.00 

WALKING STICK HEADS 

A quality set of brass parts to 

turn your own 3 section walking 

stick. Parts include the head, two 

connectors and rubber tip. Both 

weigh 260g. 


WS-1 Branch $18.00 

WS-2 Eagle $18.00 

Products shown at finished stage. 

KEY RING - 5 PACK 

35mm internal tube. Perfect for 

offcuts. Gold plated. 60g. 

Order no. 

Price 

KEY-1 $18.00 

DELUXE LETTER OPENER 

PARTS 100mm long blade. 

Make your own handle to suit 

85mm long parts with threaded 

end cap. Sold individually. 

Order no. 

Price 

LO-A2 $15.00 

LETTER OPENER PARTS 

80mm long blade. Handle length 

can be made to your own specifications. 

Pack of 5. 90g. 

Order no. 

Price 

LO-A1 $39.00 

A. 90° SOLID BRASS BUTT 

HINGE Comes as a pair. 


BMH-90-01 1” x 1” $17.70 

B. BRASS DOUBLE BALL 

CATCHES Comes as a pair. 


BMH-ADBC01 35mm $5.00 

BMH-ADBC03 43mm $6.00 

ADHESIVE-BACKED FELT 

Made of a strong 10 oz wool/rayon 

blend, this adhesive-backed felt is suitable 

for soft bases or for lining projects. 

Pieces are 431x610mm. Available individually 

in green, dark brown or red. 

Made in Canada. 

SOLID BRASS BUTT 

HINGES WITH SCREWS 

Comes as a pair. BH01 shown. 


BMH-BH01 3/4”x5/8” $7.80 

BMH-BH06 1”x3/4” $6.80 

BMH-BH09 1-1/2”x7/8” $11.40 

BMH-BH04 2-1/2”x5/8” $13.20 

LAZY SUSAN BALL B. 

A. 

D. 

BEARINGS 

Used to make rotating 

dinner table centre 

pieces. Rotates on 

heavy duty steel balls 

with just a gentle push. 

Can also be used for 

C. 

many other applications. 

E. 

Order no. Description Max.(kg) Price 

A. L-33 3” Dia. 280 $3.00 

B. L-44 4” Dia. 300 $3.50 

C. L-66 6” Dia. 680 $4.50 

D. L-88 8” Dia. 780 $9.00 

L-99 9” Dia. 340 $9.00 

E. L-120 12” Dia. 810 $10.00 

FLOCKING KITS 

A flocking kit enables you to 

quickly and easily apply a 

felt-like finish to any surface. 

Kit includes 85g of 

coloured rayon fibres and 

220ml of like-coloured adhesive, 

enough to cover approx. 

1.4m2. Available in four 

popular colours. Applicator gun 

also available. 


FLOCK-BLUE Flocking kit Blue $27.00 

FLOCK-BURGUNDY Flocking kit Burgundy $27.00 

FLOCK-GREEN Flocking kit Green $27.00 

FLOCK-RED Flocking kit Red $27.00 

FLOCK-GUN Applicator gun $19.00 

Order no. Description Colour Price 

76K04-01 Adhesive Backed Felt Green $16.00 

76K04-03 Adhesive Backed Felt Brown $16.00 

76K04-05 Adhesive Backed Felt Red $16.00 



BANDSAW 

The best choice when you only 

need a small bandsaw. Perfect 

for cutting small pen blanks or 

for model making. Aluminium 

finned motor allows for cooler 

running temperature - this is a 

feature usually found in larger 

saws. Includes stand and fence. 

BAS-250B........RRP $319.00 

SALE $299.00 

CARBA-TEC ® 17” CE 

INDUSTRIAL BANDSAW 

Combined with industry leading 

specs this bandsaw is at the top 

of it’s class.! Extra heavy solid 

(not spoked) cast iron wheels, 

increased table size, higher rip 

fence, powerful induction motor, 

no-volt safety switch, door 

cut-out switch, blade tracking 

window, micro-adjustable table 

tilt, quick release blade change 

mechanism, improved upper 

and lower blade guide design for 

superior tracking and an easy to 

read magnified rip fence cursor. 

SBW-4300CE........$1,649.00 

SALE $1,489.00 


DISC SANDER WITH 

BRAKE 

A quality machine for any workshop. 

Cast iron body construction 

with an alloy table. Unlike 

most sanders that run at twice 

the speed this machine make it 

almost impossible to burn the 

wood being sanded and greatly 

prolongs the life of the paper. 

Mitre gauge included. See pg. 

37 for replacement sanding accessories. 

DSB-12B..................$189.00 

SALE $179.00 

NEW 

CARBA-TEC ® 25” WIDE 

DRUM SANDER - TWIN 

DRUM 

Features 3hp / 240v single phase 

motor (must be hard-wired). The 

variable speed rubberised feed 

belt protects the underside of 

panels during infeed. Abrasives 

are spirally wound onto the both 

drums and are tensioned at both 

ends with spring clips - setup 

takes only a few minutes. 

MS-25B.................$2,395.00 

SALE $2,269.00 

CARBA-TEC 13” SPIRAL 

HEAD THICKNESSER 

An excellent addition to your 

workshop and does not take up 

the space that a full-size machine 

does. Plus you can take it with 

you if you do jobs away from the 

shed. 330mm wide cut, 150mm 

depth of cut, 2.4hp motor. 

CT-330X.....NEW $699.00 

8” LONGBED 

INDUSTRIAL JOINTER 

PLUS FREE 

BLADE PACK 

Simply the 

best jointer in 

its class bar 

none! Features an 

extra long 1950mm 

bed for superior 

stock support and 

a superior parallelogram 

system for 

easy and accurate 

table adjustments. 

FREE 

BLADE-8-T 

Pack valued 

at $49 

CTJ-350PK...................................................... RRP $1,344.00 

SALE $1,195.00 

15” DELUXE 

THICKNESSER 

Literally stacked with features and 

will be a welcome addition to 

any workshop. 

• Low mounting of motor 

• Cast iron table 

• 3hp motor 

• Three knife cutterhead 

• Serrated infeed roller 

• Polyurethane outfeed roller 

• Anti-kickback fingers 

• Adjustable bed rollers 

• Front mounted NVR magnetic 

safety switch 

FREE 

BLADE-15-T 

Pack valued 

at $89 

CTJ-381PK........................................................RRP $1,584.00 

SALE $1,349.00 

For more information & to shop online go to www.carbatec.com.au 123

SPECIALS - Instore & Online 

SUPERJAWS - PORTABLE 

CLAMPING SYSTEM 

This is the workstation you take 

right to the job. It provides fast 

and easy hands free clamping 

action of material up to 956mm 

and features a massive force of 

up to 1000kg for all clamping or 

pressing applications. Folded 

size 275 x 775 x 295mm, standing 

size 980 x 1000 x 860mm. 

Weighs 16kg. 

TRI-SJA200............. $169.00 

SALE $149.00 

FEIN MULTIMASTER TOP KIT 

PLUS ULTIMATE 

ACCESSORIES 

This kit includes the Fein Multimaster 

FMM 250Q plus a broad range of accessories. 

This promotion also includes 

an extra pack of ultimate accessories. 

TRITON 2000W/2-3/4HP 

DUAL MODE PRECISION 

ROUTER 

If power, versatility and ease of 

use are what you’re looking for 

in a router, the Triton TRA001 will 

meet and exceed your expectations. 

TRI-TRA001B...........$399.00 

SALE $389.00 

Limited 

Promotion 

FEIN-ULTIMATE.......................................Normally $818.00 

SALE $549.00 

MAGNETIC ANGLE FINDER 

Use this digital tool to provide 

quick, precise angle readings 

with your tablesaw or any other 

woodworking machine! Provides 

digital readings from zero to 180° 

to within 0.1° accuracy. 

AFB-15.......................... $59.00 

SALE $45.00 

PALM ROUTER 

GMR1 

Features; 550W 

motor - The most 

powerful palm 

router. Suitable 

for hinge mortising, 

decorative 

working on 

edges, groove 

cutting, dovetail cutting, window 

cutouts, decorative inlays, flush 

trimming and more, power and 

precision in your hand. 

BO-GMR1................$309.00 

SALE $289.00 

GLM 80 LASER 

RANGEFINDER + R60 

MEASURING RAIL 

• Measurements up to 

80m 

• New functionality due 

to integrated 360° 

incline sensor 

• Up to 25,000 measurements 

per charge 

• Set includes rangefinder and 

rail 

BO-GLM80SET........$379.00 

SALE $369.00 

PROFESSIONAL ANGLE 

MEASURER GAM220MF 

• Automatic calculation of 

single and double mitre 

angles 

• Rapid calculation and 

transfer of angles by means 

of memory function for 

frequently used angle 

dimensions 

• Including arm extension for 

measuring in hard-to-reach 

areas 

BO-GAM220MF.......$199.00 

SALE $179.00 

GCM 12 GDL SLIDING 

COMPOUND MITRE SAW 

• Axial-Glide TM System allows 

for expanded cutting capacity 

and smooth precision cuts. 

• Dual line precision Laser 

• Softstart for smooth ramp up 

of saw 

• Up to 110mm height and 

341mm cutting width 

BO-GCM12GDL....$1,199.00 

SALE $1,095.00 

TABLE SAW GTS10XC 

• Motor brake, soft start, over 

load protection and constant 

speed electronics. 

• Integrated sliding table for 

workpieces up to 355mm 

• Stand not included. 

BO-GTS10XC........$1,099.00 

SALE $995.00 

GEX125-1AE RANDOM 

ORBITAL SANDER 

BOSCH random orbital sanders 

are used for fine sanding with a 

high material removal rate. Integrated 

dust extraction promotes 

safety and best results. 

BO-GEX125-1AE......$159.00 

SALE $139.00 

124 

Specials valid until 15th September 2012


NOVA Woodworking 

DOMINO JOINING 

SYSTEM DF 500 


Includes 

FREE Mini 

Systainer 

worth $33 


sizes 4 x 20mm to 10 x 50mm. 




• Stops that are quick and easy to adjust, 


FE-574257S-PK.Added Value $1,695.00 

Clean, quick oil application! 

FESTOOL SURFIX OIL DISPENSER 

With high quality oils and an applicator 

sponge that absorbs excess and reapplies 

it in the right place, it is efficient and practical. 

For the perfect system pair with the ETS 

150 - from final sanding to, oil application. 

SURFIX Set includes: 

1 x heavy duty indoor oil, 1 x light one-step 

indoor oil, 1 x outdoor oil, 5 x applicator 

sponges, 10 x vlies discs, 20 x timber 

Abrasives. 

Made in Germany. 

FE-498063..................Only $199.00 

G3 Chuck 

FREE 

$169 value 

TEKNATOOL NOVA 

COMET II MIDI LATHE 

PLUS TK-G3 

Portable, space saving - yet delivers the 

capacity and the rugged stability of larger 

lathes. The NOVA Comet II Midi Lathe is 

perfect for a wide range of Wood Working 

projects. 

TK-COMET-PACK.............. RRP $868.00 

SALE $699.00 

PLUNGE SAW TS 55 WITH 1400MM 

GUIDE RAIL AND SYSTAINER 


• FastFix: quick and easy saw blade 

changing and adaptation to the 

working material 

• Spring-loaded riving knife for 

unhindered plunge cuts 

• Attachable splinterguard for 

high-quality results 

• Quick-acting brake system for safe, 

convenient sawing 

• Tool-less play setting on the guide rail 

FE-561508................. NEW $999.00 

Includes 

FREE Clean 

Kit & Mini 

Systainer 

worth $137 

CT 26 DUST EXTRACTOR PACK 


• Compact design but large volume 

• Modular plug-in slot allows maximum 

customisation 

• High-power, space-efficient turbine 

provides high suction power 

• Sys-Dock, hose garage and cord 

holder for tidy work 

FE-583494-PK.. Added Value $1,099.00 

RO 150 FEQ ROTEX SANDER - 150MM 


• Ergonomic dome grip 

• High quality gearing mechanism for 

long service life. Completely encapsulated 

by a dust-resistant sealing collar. 

• Durable sanding pads. 

3 tools in 1: coarse sanding, fine sanding 

and polishing all with one tool. 

FE-571807-PK..... Added Value $935.00 

Includes 

FREE Mini 

Systainer 

worth $33 

Includes 2 

FREE packs 

of abrasives 

worth $62 

CORDLESS DRILL CXS Li 


• The compact and handy shape facilitates 

work even in tight spaces 

• FastFix interface and CENTROTEC 

rapid tool-change system 

• 12-stage torque setting and switch-off 

for precise screwdriving 

• Latest Lithium-ion battery technology 

for the longest sustained usage 

FE-564271-PK................... RRP $449.00 

SALE $319.00 

NEW 

TEKNATOOL DVR 

2024 LATHE 

The NOVA DVR 2024 is 

a unique lathe which provides 

an unparalleled versatility, 

power and capability to your 

Wood Turning. Equipped with our innovative 

wireless remote control, the NOVA 2024 delivers 

the flexibility to meet the demands of 

21st century Wood Turning. 

TK-24PK......................... RRP $3,994.00 

SALE $3,795.00 

NOVA 

SHARPENING 

SYSTEM 

Combining the 

slideway grinding 

jig and the powerful 

finger grind jig (see 

below) into one 

versatile sharpening 

tool. 

NOVA 

FINGERNAIL JIG 

The same finger 

jig as on the Nova 

Sharpening Centre 

is used, with 

the same tru-track 

ball, lightweight but 

strong design. 

NEW 

SN2 Chuck 

FREE 

$199 value 

TK-35018................... NEW $179.00 

NEW 

TK-35053.................. NEW $129.00 

For more information & to shop online go to www.carbatec.com.au 

125


CMT TM ROUTER COLLET EXTENSION 

Every woodworker has experienced a router 

bit that is just a little too short for the job. 

CMT’s extensions fit any 1/2” collet router 

and then extends all 1/2” shank or 1/4” 

shank router bits. The extension adds 2-1/2” 

(63mm) to your router bits length. Recommended 

for router bits with diameters of 

40mm or less. This product should only be 

used with variable speed routers. 

796-001-00 suits 1/2” shank.... RRP $39.00 

SALE $35.00 

CMT TM EXPANDING 45° 

COUNTERSINK (CARBIDE TIPPED) 

Suitable for drill bits from 3 - 7mm. Outside 

diameter expands from 11 to 15mm. 50g. 

521-001-11.......................... RRP $29.00 

SALE $25.00 

DC 

Motor 

CARBA-TEC ® SC3 

METALWORKING LATHE 

Machine brass, aluminium, gun metal, cast 

iron, industrial nylon, plastics, silver, gold, 

platinum, nickel-silver and even wood. This 

variation on our popular C3 model now has 

a brushless DC motor that decreases noise 

and improves the efficient delivery of power 

to the spindle. An excellent choice for the 

model engineer. 

LATHE-SC3..................... RRP $1,095.00 

SALE $995.00 

NEW 

DC 

Motor 

CARBA-TEC ® 

SMALL 

MILLING 

MACHINE SX2 

Cast iron construction, a finely milled table, 

hardened slideways and a variable speed 

brushless DC spindle drive. The brushless 

DC motor reduces noise and contributes to 

the efficient delivery of power to the spindle. 

An excellent choice for the model engineer. 

MILL-SX2........................RRP $1,095.00 

SALE $995.00 

INDUSTRIAL STEEL SHELVING 

Ideal for garages, workshops, etc. Made of 

steel for strength and silver coloured powder 

coating provides aesthetic appeal and rust 

resistance. Infinitely variable shelf location 

via interlocking keyhole system. H: 1830mm, 

W: 1955mm, D: 610mm, weight: 68kg. Maximum 

load on individual shelves is 360kg 

when load is evenly spread over the entire 

shelf area. 

GR-4XHD.......................... RRP $295.00 

SALE $269.00 

MULTI-TOOL WITH LEATHER POUCH 

Constructed of stainless steel with wooden 

handles. Includes 15 tools, 11 screwdriver 

bits + 1 socket and leather pouch. 

LMT-1.................................. RRP $26.00 

SALE $19.00 

DMT PRO KIT 

Aligner Easy Edge-Guided Sharpening 

System provides the components for 

guided strokes, exact edge bevel and 

consistent angles, producing the ultimate 

in fast, accurate knife sharpening. Aligner 

Kits include the interchangeable stone 

holder, blade guide and one, two or three 

4” Diamond Whetstone sharpeners. 

DMT-PROKIT..............NEW $89.00 

DMT ® HANDLED DIA-SHARPS TM 

With overall length of 180mm, these very 

sturdy sharpening stones have been 

moulded onto the plastic handle not glued 

like inferior competitors. Size: 63 x 19mm. 

DMT-D2E Extra Fine...............RRP $10.00 

SALE $9.00 

DMT-D2F Fine......................RRP $10.00 

SALE $9.00 

DMT-D2C Coarse..................RRP $10.00 

SALE $9.00 

DMT ® 8” DUOSHARP PLUS WITH BASE 

This 8” version of the Duosharp has the 

added advantage of a continuous diamond 

section at one end for sharp pointed tools. 

Also included at no cost is the DuoBase with 

non-slip feet. Size: 203 x 67mm. 

DMT-WM8FC-WB Fine/Coarse. RRP $139.00 

SALE $129.00 

DMT-WM8EF-WB XFine/Fine... RRP $139.00 

SALE $129.00 

DMT ® DOUBLE 

SIDED DIA-SHARP TM 

Combines two grits in the same 

stone. Fast and easy way to sharpen any 

tool. Size: 150x50mm 

DMT-D6CX X-Coarse/Coarse...... RRP $59.00 

SALE $49.00 

DMT-D6FC Coarse/Fine............ RRP $59.00 

SALE $49.00 

DMT-D6EF Fine/X-Fine............. RRP $59.00 

SALE $49.00 

DMT-D6FX Fine/X-Coarse.......... RRP $59.00 

SALE $49.00 

126 



A. 

C. 

A. VERITAS ® MEDIUM 

SHOULDER PLANE 

A versatile tool, our medium shoulder plane 

can be used on end grain or for paring cross 

grain as is often required on tenon cheeks. 

05P41-01........................... RRP $219.00 

SALE $199.00 

B. VERITAS ® LOW 

ANGLE BLOCK PLANE 

This block plane stands apart from the rest. 

The tall side wings are ideal for shooting, and 

finger grips in the sides improve control. The 

combined blade advance and lateral adjust 

is the most sensitive, accurate adjustment 

mechanism available. The low-angle plane 

with its 12° bed angle, excels at end-grain 

work. 

05P22-01........................... RRP $189.00 

SALE $169.00 

B. D. 

C. VERITAS ® LOW ANGLE JACK 

An exceptionally versatile plane. It excels at 

end-grain work, is great for shooting, and 

also works well for smoothing. 

05P34-01........................... RRP $319.00 

SALE $289.00 

VERITAS ® SPOKESHAVES 

Designed for smooth, effective, chatter free 

shaping of chair spindles, panel edges, 

paddles, tool handles, and all other kinds 

of freehand shaping. The flat spokeshave 

has a 1/8” (0.125”) thick A2 tool steel blade, 

the round has a 1/8” (0.125”) thick A2 steel 

blade seated at 45° to the sole and is 260mm 

long overall. 

D. 05P33-01 (Flat)............ RRP $119.00 

SALE $99.00 

E. 05P33-03 (Round)........ RRP $119.00 

SALE $99.00 

E. 

MOISTURE 

METER WITH 

LCD DISPLAY 

This meter works 

using the electrical resistance 

principle and 

is ideal for comparative 

moisture readings on common 

timber species and building materials. 

Range of 6 to 44% to an accuracy of 

2% in timber. Building materials such as wall 

board, drywall, plaster, mortar and concrete 

can also be measured to 0.05% from 0.20% 

to 2.0%. 127mm long. 130g. 

CT-EM4807......................... RRP $69.00 

SALE $59.00 

HARON SANDING DRUM KIT 

Sanding drums are one of the easiest and 

most efficient ways to sand edges accurately 

or follow a curve. Suitable for use in 

drill presses these hard rubber drums are a 

real bargain. They measure 40mm high and 

50mm in diameter and come with three replacement 

bands (40, 80 and 150grit). Mandrel 

size is 6mm. At under $10 they won’t last 

long. 

HA-334PK........................... RRP $19.00 

RUNOUT SPECIAL $9.00 

A. 

C. 

B. 

NEW 

A. FINE TOOTH JOINERY SAW 

Blade length 240mm, kerf 0.41mm, blade thickness 0.30mm, t.p.i. 25. Very 

fine cut saw for dovetailing and other extremely precise accurate cuts. 210g. 

Z-7029.................................................................................. RRP $57.00 

SALE $49.00 

B. GENERAL PURPOSE SAW 

Blade length 150mm, kerf 0.51mm, blade thickness 0.30mm, t.p.i. 18. 120g. 

Z-7010.................................................................................RRP $36.00 

SALE $29.00 

C. CROSSCUT FLEXIBLE CARPENTERS SAW 

Blade length 250mm, kerf 0.65mm, blade thickness 0.50mm 18tpi. 190g. 

Z-15006...............................................................................RRP $47.00 

SALE $39.00 

Buy all 3 ‘Z Saws’ Z-SAW-PK .........................RRP $140.00 

SALE $109.00 

TOOL SET 

This tool set is the perfect selection for 

Dad’s workshop kit. Kincrome is synonymous 

with quality and ever tool in this kit is 

made with the professional in mind. Kit includes: 

17 Metric sockets from 8 to 32mm, 

12 Imperial sockets from 3/8” to 1-3/16”, 1 

x 60mm extension bar, 1 x 125mm wobble 

extension bar, 1 Universal joint, 1 Ratchet 

handle, 2 Flat screwdrivers and 2 Phillips 

screwdrivers. Rugged plastic storage case 

included. 

K2059................................ RRP $439.00 

SALE $389.00 

For more information & to shop online go to www.carbatec.com.au 

127


NEW 

LOW PRICES 

A premier manufacturer of specialist woodworking 

tools with a heritage dating back more than 

200 years. During that time Robert Sorby has developed 

a global reputation for manufacturing the 

finest edge tools available. Robert Sorby proudly 

continues this manufacturing tradition from their 

base in Sheffield, England. 

6” HIGH SPEED DOUBLE GRINDER 

This is the most popular Creusen grinder 

and great for just about any workshop activity. 

On one side is a generous 40mm wide 

aluminium oxide stone and on the other a 

20mm coarse grey aluminium oxide stone 

for general grinding. 2800rpm approx. 230v, 

350w motor. 

CG-DS7150TS................... was $299.00 

NEW LOW PRICE $229.00 

NEW 

12 PIECE UNIVERSAL MICRO 

TURNING SYSTEM 

This range of tools is centred on a comfortable 

aluminium handle into which a series of 

micro tools can be fitted. The set includes 

Handle, hey key and 12 blades; 13mm 

roughing gouge, 13mm parting tool, 13mm 

gouge, 4mm beading & parting tool, boring 

tool, swan neck hollowing tool, 6mm skew, 

round nose scraper, curved undercut scraper, 

french curve scraper, diamond undercut 

scraper, 6mm spindle gouge. 

RSB-888SET............. NEW $279.00 

NEW 

8” HIGH SPEED DOUBLE GRINDER 

This sturdy bench grinder is suited for heavier 

work and fitted with a very powerful 600W 

motor and 200mm diameter by 25mm wide 

stones. 230V, 600W, 2800rpm approx. 

CG-DS7200T......................RRP $329.00 


6” LOW SPEED DOUBLE GRINDER 

Creusen have made this grinder with woodturners 

particularly in mind. This model’s 

slower speed prevents burning the delicate 

tips of turning tools. It is fitted with 40mm 

wide white stones - one wheel is a coarse 

60 grit and the other is a finer 100 grit; bore 

size of both is 15mm. 230V, 350W, 1400rpm 

approx. 

CG-DS7500TS...................RRP $359.00 


Creusen Powerline products 

are known for their quality, 

durability and reliable service. 

This series of grinding 

machine is aimed at the serious 

user who demands quality 

in all aspects of their work. Creusen 

have a long tradition of meeting this 

demand and can back that up with a 

5 year warranty. 

A. 

A. TEXTURING TOOL 

The Texturing Tool enables the turner to alter 

the visual and tactile qualities of a work piece 

by creating striations, whorls, an orange peel 

effect and more. 

B. SPIRALING SYSTEM 

Barley twists, spirals and flutes have always 

represented a problem for the woodturner. 

The System not only overcomes many of 

these difficulties, but also allows the turner’s 

imagination to run wild as he enters a new 

field of decoration. Based on the same principle 

as the texturing tool, it is simple to use 

even in the hands of a novice. 

NEW 

STEBCENTRES 

The original Stebcentre is an invaluable accessory 

for every woodturner. Inspired by 

Norwegian turner Petter Herud, Revolving 

(or Live) Stebcentres have been introduced. 

These offer the same degree of security, but 

also allow basic off-centre turning. 

B. 

NEW 

RSB-310H................. NEW $115.00 

RSB-330H................. NEW $259.00 

RSB-STB250 1/2”.........NEW $95.00 

RSB-STB200 7/8”.........NEW $95.00 

RSB-STB232 1-1/4”... NEW $109.00 

EXCELSIOR CHISEL RANGE 

This range has been designed with the 

connoisseur woodturner and those who 

regularly turn hardwoods in mind. A plasma 

bonded titanium nitride finish layered over 

traditional triple tempered high-speed steel 

provides longevity and edge retention. 

RSB-84214 1/4” Bowl.......NEW $95.00 

RSB-84238 3/8” Bowl.... NEW $119.00 

RSB-84212 1/2” Bowl.... NEW $139.00 

RSB-84014 1/4” Spindle....NEW $59.00 



RSB-84334 3/4” Roughing.NEW $119.00 

NEW 

PARING CHISELS 

These paring chisels feature a 9-3/4” long, 

flat, thin blade that tapers towards the cutting 

edge to provide the finest of cuts. Used 

for hand paring with one hand on the handle 

and the other controlling blade. Bevels on 

the top face enable access to difficult corners. 

Fitted with boxwood handle. 

RSB-24114 1/4”............NEW $75.00 

RSB-24138 3/8”............NEW $79.00 

RSB-24112 1/2”............NEW $82.00 

RSB-24134 3/4”............NEW $85.00 

RSB-24110 1”..............NEW $89.00 

128 


NEW PRODUCTS 

SPECIALS 

NEW 

ROCKLER INTERLOCK SIGNMAKER’S 

LETTER KIT 2-1/4” 

Templates interlock to form a stable pattern 

as you rout signs with appropriate carbide 

router bits and bushings. The letters kit includes 

a total of 40 letters with duplicates 

of common letters and three spacers. Note: 

Router bit not included. 

RK-30610............................ RRP $24.00 

SALE $22.00 

NEW 

ROCKLER 1.2M UNIVERSAL T-TRACK KIT 

Outfit your workbenches, jigs, or machine 

tables with the ultimate accessory track! Universal 

T-Track boasts a unique stacked-slot 

design that allows you to attach any accessory 

with 1/4” T-bolts, 5/16” T-bolts, or 1/4” 

Hex-bolts. 

RK-24063.....................NEW $45.00 

ROCKLER TOOL 

BOX LINER 

Prevent tools 

from sliding 

around and 

becoming 

damaged in 

your tool box. This nonslip 

liner is solid grade and cushioned to keep 

tools in place even as you slide tool box 

drawers in and out, avoiding scratching and 

marring. Anticorrosive Rust Gard coating 

will inhibit rust and protect your tools for up 

to five years. Comes in a 559mm x 1.8m roll 

that can easily be cut to size and installed 

without adhesive. Washable. 

RK-29997.....................NEW $22.00 

NEW 

NEW 

ROCKLER SURE-FOOT PLUS TM 3/4” 

PIPE CLAMP 

Extra-wide 2-1/2” foot provides exceptional 

stability and prevents tipover during setup. It 

won’t rock on uneven bench surfaces! 

RK-30921............................ RRP $29.00 

SALE $25.00 

ROCKLER BENCH DOG BENCH 

COOKIE TM 

Turn Bench Cookie Plus Work Grippers 

into shop fixtures. Standard and XL Risers 

(RK-35142 and RK-34671 sold separately) 

screw into Bench Cookie Plus discs to 

elevate them for work with saws and other 

shop tools that require extra height. Standard 

Risers achieve a three Bench Cookie 

height and XL Risers achieve both two and 

three Bench Cookie heights. (Each Bench 

Cookie is 3” dia. x 1” thick). All Risers fit 3/4” 

bench dog holes or 3/4” holes drilled into 

sawhorses or other fixtures for a secure base 

while you work. 

RK-38052........................ RRP $15.00ea 

2 FOR $22.00 

4 FOR $40.00 

ROCKLER ROUTER 

TABLE BOX 

JOINT JIG 

Make precise, tightfitting 

box joints with your router! For use on 

virtually any router table with a standard 3/4” 

miter slot, this jig features a smooth-sliding 

backer sled and three (3) precision-machined 

aluminium indexing keys to give you 

air-tight joints with either 1/4”, 3/8” or 1/2” 

spacing. Works with stock up to 3/4” thick. 

RK-29502.................. NEW $119.00 

NEW 

ROCKLER 3 

PIECE SPIRAL 

UPCUT BIT SET 

Includes 1/4”, 3/8” 

and 1/2” HSS Spiral 

Mortising Bits. 

RK-30166.....................NEW $89.00 

ROCKLER NEEDLE 

POINT GLUE INJECTOR 

The 1-1/4’’ long needle 

reaches where other glue 

applicators will never go. 

Ideal for getting glue into 

grooves, crevices and other 

hard-to-reach spots. Cap 

prevents glue from drying. 

Easy-to-handle plastic bottle 

holds 14ml. 

NEW 

RK-63297....................... NEW $6.00 

ROCKLER PICTURE-HANGING 

KEYHOLE TEMPLATE 

Hang pictures and other items easily and 

precisely with this slot cutting template. 

No measuring is required, just line up the 

template with the corners of your frame and 

rout - your slots will always be level. The two 

short slots are perfectly symmetrical so you 

can switch easily from left to right. The long 

slot increases your horizontal adjustability. 

RK-32884 Template.......NEW $19.00 

RK-38756 Brass Bush...NEW $14.00 

NEW 

ROCKLER TRIM 

ROUTER TABLE 

Get more out of your 

compact router with 

a rugged, adjustable 

Trim Router Table that 

goes anywhere! A 

Rockler Exclusive, 

pre-drilled holes on 

the back of the Trim Router Table let you attach 

a clamping strip for quick use on the 

edge of a bench, a table, a piece of plywood, 

or the tailgate on your ute. Router not incl. 

RK-43550.....................NEW $89.00 

CYH-373 (Clamps)..................$20.00 


BRISBANE 

128 Ingleston Road, Wakerley, Qld, 4154 

t: 07 3390 5888 f: 07 3890 5280 

orders@carbatec.com.au 

NEW 

SYDNEY 

113 Station Road, Auburn, NSW, 2144 

t: 02 9648 6446 f: 02 9648 6443 

sydney@carbatec.com.au 

NEW 

MELBOURNE 

80 - 82 Osborne Avenue Springvale, Vic, 3171 

t: 03 8549 9999 f: 03 8549 9998 

melbourne@carbatec.com.au 

ADELAIDE 

27 Magill Road, Stepney, SA, 5069 

t: 08 8362 9111 f: 08 8363 0271 

adelaide@carbatec.com.au 

Shop online at 


Order toll free within QLD/NSW/VIC/SA/NT 

1800 658 111 

RK-34010.............NEW $8.00 

RK-38399.......... NEW $32.00 

PERTH 

Order toll free within WA 

1800 886 657 

NEW 

NEW 

RK-42388.......................................NEW $12.00 

NEW 

LAUNCESTON 

CARBA-TEC (TAS) Pty. Ltd. ACN 122 150 029 

242 Hobart Road, Kings Meadows, TAS, 7249 

t: 03 6344 9899 f: 03 6343 1845 

launceston@carbatec.com.au 

RK-34099..........NEW $49.00 

WS-BASIC50.... NEW $59.00 

WS-COMFORT65.NEW $99.00 

Thinking of 

a gift? 

9 333827 217087 

The perfect solution. Purchase instore or online.

Download PDF Catalogue - Carba-Tec

Create successful ePaper yourself

Delete template?

Save as template?